Measurement and Evaluation of Cross-talk Effects in Multi-nozzle Inkjet Head

다중 노즐 잉크젯 헤드의 상호 간섭 측정 및 평가

  • Kwon, Kye-Si (Department of Mechanical Engineering, Soonchunhyang Univ.) ;
  • Kim, Jin-Won (Department of Mechanical Engineering, Soonchunhyang Univ.)
  • 권계시 (순천향대학교 기계공학과) ;
  • 김진원 (순천향대학교 기계공학과)
  • Received : 2010.08.06
  • Accepted : 2010.10.19
  • Published : 2011.01.01

Abstract

Inkjet printhead may have a lot of nozzles to increase productivity as a manufacturing tool. So, the uniformity of jetting performance among a lot of nozzles has been one of the key issues in inkjet technology In this study, we investigated the cross-talk effect which should be reduced for uniform jetting performance among a lot of nozzles. Due to the cross-talk, the jetting performance of a nozzle can be affected when neighboring nozzles are firing. For experimental study, we used commercial inkjet head SE-128 from Dimatix. To understand the cross-talk effect of SE-128 head, we measured the change in jetting speed of a nozzle when neighboring nozzles are jetting. The measured jetting speed was compared to the case of one nozzle jetting. Also, we used laser vibrometer to measure change in pressure wave due to cross-talk. As a result of the cross-talk, the jetting speed can become faster or sometimes slower depending on firing nozzle location. If the all nozzle are jetting, the jetting speed of a nozzle became slower because the pressure wave for jetting is reduced.

Keywords

References

  1. Creagh, L., McDonald, M. and Letendre, W., "Ink Jet Printhead as a precision deposition tool in manufacturing FPDs," SEMICON China, FPD Manufacturing Conference, 2004.
  2. McDonald, M. and Zhou Y., "Crosstalk study of a high speed shear mode piezo ink jet printhead," International Conference on Digital Printing Technologies, pp. 40-43, 1999.
  3. Wassink, M. B. G., Bosgra, O. H. and Koekebakker, S. H., "Minimization of cross-talk for an inkjet printhead using MIMO ILC," Amercian Control Conference, pp. 964-969, 2006.
  4. Kwon, K. S., Go, J. K. and Kim, J. W., "Development of Inkjet printing system for printed electronics," Proceedings of KSMS Spring Conference, pp. 174-175, 2010.
  5. Kwon, K. S., "Printing system development," website: http://www.youtube.com/watch?v=1eG8kDujXr8, 2009.
  6. Kwon, K. S., "Development of a Test stand for measuring ink jetting performance," Journal of the Korean Society for Precision Engineering, Vol. 25, No. 8, pp. 45-50, 2008.
  7. Kwon, K. S. and Kim, W., "A waveform design method for high speed inkjet printing based on selfsensing measurement," Sensors and Actuators A, Vol. 140, No. 1, pp. 75-83, 2007.