DOI QR코드

DOI QR Code

Integrated Guidance and Control Law with Impact Angle Constraint

입사각제어를 위한 통합유도조종법칙

  • 윤중섭 (인하대학교 항공우주공학과) ;
  • 박우성 (인하대학교 항공우주공학과) ;
  • 유창경 (인하대학교 항공우주공학과)
  • Received : 2011.03.21
  • Accepted : 2011.05.27
  • Published : 2011.06.01

Abstract

The concept of the IGC(Integrated Guidance and Control) has been introduced to overcome the performance limit of the SGC(Separated Guidance and Control) loop. A new type of IGC with impact angle constraint has been proposed in this paper. Angle of attack, pitch angle rate, pitch angle and line of sight angle are considered as state variables. A controllability analysis and equilibrium point analysis have been carried out to investigate the control characteristic of the prposed IGC. The LQR(Linear Quadratic Regulator) has been adopted for the control law and detailed explanations about the adoption has been provided. The performance comparison between the IGC and the SGC has been carried out. The result of numerical simulations shows that the IGC guarantees better guidance performance than the SGC when the agile maneuver is needed for a specific guidance geometry.

통합유도조종(IGC, Integrated Guidance and Control)은 기존의 분리형 유도조종루프의 성능한계를 극복하기 위해 제안된 개념이다. 본 논문에서는 입사각제어가 가능한 새로운 형태의 IGC 기법을 제안하였다. 제안된 IGC는 자동조종성능과 유도성능을 동시에 얻기 위해 받음각, 피치각속도, 피치각, 시선각을 상태변수로 고려한다. 제안된 IGC의 제어특성을 고찰하기 위하여 비선형 상태방정식에 대한 가제어성 해석 및 평형점 해석을 수행 하였다. IGC 모델에 대한 제어기법으로는 LQR(Linear Quadratic Regulator)을 사용하였으며 LQR을 IGC에 적용하기 위한 방법을 상세하게 설명하였다. 수치 시뮬레이션을 통해 분리형 유도조종루프와 IGC의 성능을 비교하였다. 성능 비교 결과 IGC는 급격한 기동이 필요한 유도기하에 대하여 분리형 유도조종루프에 비해 우수한 유도성능을 보임을 확인하였다.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. C. F. Lin, Q. Wang, J. L. Speyer, J. H. Evers, and J. R. Cloutier, "Integrated estimation, guidance, and control system design using game theoretic approach", Proceedings of the American Control Conference, Chicago, USA, 1992, pp. 3220-3224.
  2. N. F. Palumbo, B. E. Reardon, and R. A. Blauwkamp, "Integrated guidance and control for homing missiles", Johns Hopkins APL Technical Digest, Vol. 25, No. 2, 2004, pp.121-139.
  3. J. Wang, and W. J. Rugh, "Parameterized Linear Systems and Linearization Families for Nonlinear Systems", IEEE tr. on Circuit and Systems, vol. CAS-34, no. 6, pp. 650-657, 1987. https://doi.org/10.1109/TCS.1987.1086191
  4. J. K. Hedrick, "Controllability and Observability of Nonlinear Systems", Lecture Note, 2005.
  5. K. Ogata, "Modern Control Engineering", 4th edition, Prentice Hall, 2001.
  6. 박미현, 윤중섭, 유창경, “휴대용 전술유도무기 형상설계”, 한국항공우주학회 2008년도 춘계학술발표회 논문집, pp. 270-273, 2008년 4월.
  7. J. H. Blakelock, "Automatic Control of Aircraft and Missile", 2nd edition, Wiley, 1991.
  8. C. K. Ryoo, H. Cho and M. J. Tahk, "Time-to-go Weighted Optimal Guidance Law with Impact Angle Constraints", IEEE tr. on Control Systems Technology, vol. 14, no. 3, pp. 483-492, 2006. https://doi.org/10.1109/TCST.2006.872525

Cited by

  1. Impact angle constrained three-dimensional integrated guidance and control for STT missile in the presence of input saturation vol.64, 2016, https://doi.org/10.1016/j.isatra.2016.04.026
  2. On-line optimization design of sliding mode guidance law with multiple constraints vol.37, pp.14-15, 2013, https://doi.org/10.1016/j.apm.2013.02.030