한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제20권3호
  • /
  • Pages.350-356
  • /
  • 2011
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

차량 소음기용 다공파이프 자동절단 메커니즘 설계에 관한 연구

A Study on the Design of the Automatic Cutting Mechanism of the Perforation Pipes in an Automobile Muffler

  • 김용석 (울산대학교 기계기술연구소) ;
  • 정찬세 (울산대학교 기계자동차공학부) ;
  • 양순용 (울산대학교 기계자동차공학부)
  • 투고 : 2011.01.28
  • 심사 : 2011.04.18
  • 발행 : 2011.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, we proposed the automatic cutting mechanism of the perforation pipes in an automobile muffler. This cutting mechanism makes continuous work possible, because it performs the batch work via the sequential operation of loading, feeding, cutting, and discharging. The proposed cutting mechanism consists of the frame unit, escape unit, turning unit, feeding unit, vision system, clamping unit, spindle/cutting unit and cooling unit. And, these mechanisms have been modularized through mechanical, dynamical and structural optimized design using the SMO (SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The cutting process cycle is performed in the order of loading, vision processing, feeding, clamping, cutting and discharging. And the cycle time for cutting one piece was designed to be completed in four seconds.

키워드

참고문헌

  1. Song, I. S., Kim, Y. S., Yoon, D. H., and Yang, S. Y., 2010, "A Study on Development of Automatic Punched Pipe Cutting Machine for Automobile Muffler," Proceeding of the KSMTE Spring Conference 2010, pp. 82.
  2. Song, I. S., Kim, H. S,, Jeong, C. S., Kim, Y. S., and Yang, S. Y., 2010, "A Study on the Development of Punched Pipe Automatic Cutting Machine for Using Vision System," Proceeding of the KSME 2010 Spring Annual Meeting, pp. 1621-1625.
  3. Park, J. S., Kim, H. S,, Jeong, C. S., Kim, Y. S., and Yang, S. Y., "Development of transfer system of cutting punched pipes," Proceeding of the KSMTE Spring Conference 2010, pp. 111-114.
  4. Lee, J. H., 2003, "Automobile muffler," Team of Machinery test of Korea Consumer Agency (KCA), Monthly Consumer Era. Vol. 2003. No. 1, pp. 12-14.
  5. STANDARD, 2004, Muffler and Exhaust Pipe for Automobiles, KS R 4047, Korea Agency for Technology and Standard.
  6. STANDARD, 2004, Carbon Steel Tubes for General Structural Purposes, KS D 3506, KS D 3566, Korea Agency for Technology and Standard.
  7. Lee, S. S., Hwang, Y. J., and Kim, H. J., 2002, CATIA V5 to study by PC ver 5.7, pp. 319-370, pp. 631-633.
  8. MSC, 2005, SimDesigner Catia V5 R14 Manual, Chap: 'SMO' guide part, MSC Software, Santa Ana, USA, pp. 90-96.
  9. Seo, N. S., 2002, Manufacturing Processes, Dong MyungSa, Korea, pp. 442-448.
  10. Serope K., 2007, Manufacturing Processes for Engineering Materials/Fifth Edition, Addison Wesley Publishing Company, USA.
  11. Ronald A. Walsh., and Denis R., 2006, "Machining and metalworking handbook/Cormier-3rd Edition, The McGraw-Hill Companies, Inc. pp. 426.
  12. SMC Korea, 2007, http://www.smckorea.co.kr/esales/data/sangpum/catalog/MHS.pdf#page=438, Air-Chuck Catalog of 2 Finger Type by Slide Guide Method, Model MHS2, PP. 437.