Improvement of Paper Smoothness for the Printed Electronics Base Paper

인쇄 전자 용지의 특성 구현을 위한 종이의 평활도 증가에 대한 연구

  • 김병현 (중부대학교 인쇄미디어학과) ;
  • 유희태 (중부대학교 인쇄미디어학과) ;
  • 강영립 (중부대학교 인쇄미디어학과)
  • Received : 2011.05.02
  • Published : 2011.06.03

Abstract

The making of high leveled smoothness for the printed electronics base paper, wood pulp and sea algal pulp were mixed. If sea algal pulp contents is increased to 9%, the smoothness was moderately increased, and more effective in Softwood mixture than Hardwood, low freeness(high wetness) than high freeness(low wetness).

Keywords

References

  1. Printed Electronics Europe 2006, Cambridge, UK, April(2006).
  2. Printed Electronics USA 2007, San Francisco, USA, November(2007).
  3. Printable Electronics, NanoMarkets Report, September 2006, 3rd Global Plastic Electronics, Germany, October(2007).
  4. S. Y. Chou, P. R. Krauss, P. J . Renstrom, Appl. Phys. Lett. Vol. 67, pp. 3114(1995). https://doi.org/10.1063/1.114851
  5. L. J. Guo, J . Phys. D Vol. 37, pp. 123(2004). https://doi.org/10.1088/0022-3727/37/11/R01
  6. N. Lin, J. Kim, S. Lee, N. Kim, G, Gho, "Screen Printed Resonant Tage for Electronic Article Surveilance Tags," IEEE Trans. Advanced packaging, Vol. 32, pp. 72-76 (2009). https://doi.org/10.1109/TADVP.2008.2006656
  7. M. Jung, J. Kim, J. Noh, N, Lim, C. Lim, K. Lee, J. Kim, H. Kang, K. Jung, A, Leonard, J. M. Tour, G. Cho, "All Printed and Roll-to-Roll Printable 13.56$MH_{z}$ Operated 1-bit RF Tag on Plastic Foils," IEEE Trans. Electron Device(Accepted).
  8. 조규진 외, "Roll-to-Roll 인쇄 RFID Tag 개발현황", 화학공학기술 정보지.
  9. S. Chun et. al., "Roll-to-Roll Printing of Silver Oxide Pastes and Low Temperature conversion to Silver Patterns", Chem. Mater., Vol. 21, No. 2, pp. 343(2009). https://doi.org/10.1021/cm802475m