DOI QR코드

DOI QR Code

항공안전인증을 고려한 소형제트항공기 플랩 재설계

Re-Design of Wing Flap for Very Light Jet Aircraft Incorporating Airworthiness Certification

  • 윤정원 (건국대학교 대학원 항공우주공학과, 녹원종합기술(주)) ;
  • 이효진 (건국대학교 항공우주통합설계연구센터) ;
  • 이재우 (건국대학교 항공우주정보시스템공학과) ;
  • 김상호 (건국대학교 항공우주정보시스템공학과) ;
  • 변영환 (건국대학교 항공우주정보시스템공학과) ;
  • 김임권 (건국대학교 항공우주통합설계연구센터)
  • 투고 : 2011.08.04
  • 심사 : 2011.09.18
  • 발행 : 2011.09.30

초록

In this paper, a conceptual design process for Very Light Jet aircraft has been proposed incorporating aircraft safety certification. During the proposed design process, satisfaction of the airworthiness certification for an intermediate resulting aircraft configuration is evaluated and then redesigns are carried out if necessary and until the designed aircraft configuration satisfies the airworthiness requirements. Certification database has been developed using FAR 23, AC 23, KAS 23, and CS 23 as the airworthiness certification. Based on the developed certification database Design Certifcation Related Table has been produced to use the airworthiness requirements as design constraints in the propsed design process. Using Quality Function Deployment the design variables for a redesign are carefully selected and a design optimization is performed. To demonstrate the feasibility and effectiveness of rapid aircraft conceptual design using the proposed approach, a Very Light Jet design optimization including a redesign of wing flap has been performed and the design results have been presented.

키워드

참고문헌

  1. 조국현, 윤정원, 이재우, 변영환, 김상호, 이효진, 김임권, "설계 개발 단계의 소형항공기 인증요건 적용 연구", 한국항공운항학회 2008 추계학술대회논문집, 2008년 11월
  2. 고재일,"국내개발 군용항공기 수출지원과 개조/개량 항공기를 위한 감항증명제도 적용방안," 방위사업청, 2006.
  3. J. I. Hileman, Z. S. Spakovszky, "Airframe Design for 'Silent Aircraft',"
  4. Antonio Filippone,"Comprehensive analysis of transport aircraft flight performance," Progress in Aerospace Sciences,vol.44,p192-236, 2008 https://doi.org/10.1016/j.paerosci.2007.10.005
  5. 양희동, 윤정원, 조성환, 최성락, 김민희, 홍지승, 이규상, 정봉환, 이상태, "Very Light Jet Conceptual Design Lontano", 2007 설계 최종보고서, 건국대학교, 2007년 7월
  6. FAR, Code of Federal Regulations 14 Parts 1 to 59 Aeronautics and space, Jan. 2007.
  7. 이효진, 윤정원, 이재우, 김임권, 김상호, "소형항공기 인증-설계 통합 시스템 개발을 위한 Engineering Requirements and Guide 및 인증 DB 구축에 관한 연구", 한국항공우주학회 2010 추계학술대회논문집, 2009년 10월
  8. Aero Physics Research Corporation, "GASP-General Aviation Synthesis Program Volume 1- Main Program", Jan. 1978.
  9. 윤정원, 배보영, 이재우, 변영환, "항공안전규정 및 의사결정모델을 이용한 항공기 형상선정기법 연구", 한국항공우주학회지, vol.38, No.5, 2010
  10. 김세훈, 김현준, 배철호, 이정환, 이호용, 서명원, "비용함수를 이용한 VVVF 전동차 제동장치의 시스템 구조 및 신뢰도 최적화", Transactions of KSAE, Vol. 15, No. 3, pp.63-71, 2007
  11. Jungwon Yoon, Nhu-Van Nguyen, Seok-Min Choi, Jae-woo Lee, Sangho Kim and Yung-Hwan Byun, "Multidisciplinary General Aviation Aircraft Design Optimizations Incorporating Airworthiness Constraints", 2010 ATIO/MAO Conference, September.2010
  12. Ole Leth, Gorm Leth, Daniel J.Strash and Nete Leth, "Engineering Solution in Support of Supplementary Type Certificate to a Transport-Category Aircraft", Journal of Aircraft, Vol. 45 No.1, Jan-Feb. 2008.
  13. L. Painton and J. Campbell, "Genetic Algorithms in Optimization of System Reliability," IEEE Trasactions on Reliability, Vol.44, No.2, pp.172-178, 1995. https://doi.org/10.1109/24.387368