DOI QR코드

DOI QR Code

Design of High Strength Underground FRP Septic Tank Stiffened by Circular Steel Pipe

원형강관으로 보강된 지중매립형 FRP 개인하수 처리시설의 설계

  • 조광제 (충북대학교 토목공학과) ;
  • 김성보 (충북대학교 토목공학과)
  • Received : 2012.02.13
  • Accepted : 2012.04.12
  • Published : 2012.06.30

Abstract

The design of high strength underground septic tank stiffened by steel pipe is presented and the ultimate behavior is investigated according to the full scale experiments for three types of specimens. The limitation of the current design specification are pointed out and the general design procedure of private sewage treatment facility are newly developed considering thickness of FRP shell, types of steel pipe stiffer and diaphragm wall. The direct tensile and bending test for FRP material of septic tank were performed. The increase effect of ultimate strength due to the circular steel pipe are investigated by the full scale field test and compared with the results by the finite element analysis.

지중에 매설된 원형강관으로 보강된 FRP 개인하수 처리시설에 대한 설계를 수행하고 실물 현장 재하실험을 통하여 보강의 형태 및 종류에 따른 극한거동을 분석하였다. 현행 개인하수 처리시설의 설계 기준의 문제점 파악하고 강관으로 보강된 하수처리시설에 대한 구조설계절차를 정립하였다. 본체 두께 및 보강링, 격벽을 고려한 제품을 설계하고 안전성을 검토하였다. 원통형 쉘의 구조재료로 사용되는 박막의 FRP에 대해 휨실험과 인장실험을 수행하여 재료특성을 파악하였다. 개인하수처리시설을 무보강, 강재 보강링 보강, 격벽 보강으로 설계한 제품의 현장실험을 통하여 본체의 변위와 응력의 변화를 계측 하여 파괴거동을 분석하였고 유한요소해석 결과와 비교, 검토하였다.

Keywords

References

  1. 최동호, 조선규, 박상일, 문은경(2006) 고강도 원형 지중강판 구조물의 좌굴성능에 대한 수치적 평가. 한국지반환경공학회논문집, 한국지반환경공학회, 제7권 제6호, pp. 75-88.
  2. 장효주, 이장훈, 강선홍(2010) 개인하수처리시설의 제도개선에 관한 연구. 상하수도학회지, 대한상수도학회, 제24권 제1호, pp. 33-40.
  3. 환경부(2011) 개인하수처리시설의 구조.규격.성능 및 재질 기준, 하수도법 시행규칙 제 58조.
  4. 환경관리공단(2003) 관로설계기준
  5. 전진수, 김성남, 한택희, 강영종(2008 지중 매설관 곡선부의 해석 및 안전성 평가. 한국방재학회논문집, 한국방재학회, 제8권 제1호, pp. 47-55.
  6. 안우철, 한택희, 임남형, 강영종(2003), 등문포하중을 받는 파형강관의 좌굴거동. 한국강구조학회논문집, 한국강구조학회, 제15권 제1호, pp. 33-40.
  7. Luscher, U. (1966) Buckling of soil-surround tubes, ASCE, J. Soil Mechanics and foundation division, pp. 211-228.
  8. Howard, A.K. (1977) Modulus of soil reaction values for buried flexible pipe, J. Geotechnical Engineering division, pp. 33-43.
  9. Cheney, J.A. (1971) Buckling of soil-surround tubes, J Engineering Mechanics division, pp. 1121-1131.
  10. Abdel-Sayed, G. (1978) Stability of flexible conduits embedded in soil, Canadian J. Civil Eng., Vol. 5, No. 33, pp. 324-334. https://doi.org/10.1139/l78-037
  11. Ghobrial, M. and Abdel-Sayed, G. (1985) Inelastic buckling of soilsteel structures, Transportation Research Board, pp. 7-14.
  12. Okeagu, B.N. and Abdel-Sayed, G. (1984), Coefficients of Soil Reaction for Buried Flexible Conduits, Journal of Geotechnical Engineering, ASCE, Vol. 110, pp. 908-922. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:7(908)
  13. Forrestal, M.J. and Herrmann, G. (1965) Buckling of a long cylindrical shell surrounded by an elastic medium, International Journal of Solids and Structures, Vol. 1, pp. 297-310. https://doi.org/10.1016/0020-7683(65)90035-1
  14. Moore, I.D. (1985) The Stability of Buried Tubes, Ph D. thesis, School of Civil and Mining Engineering, University of Sydney, Australia.
  15. Booy, C. (1957) Flexible Conduit Studies, Prairie Farm Rehabilitation Administration, Canada Department of Agriculture, Saskatoon, Saskatchewan.
  16. Meyerhof, G.G. and Baikie, L.D. (1963) Strength of Steel Culvert Sheets Bearing Against Compacted Sand Backfill, Highway Reserch Record No. 30, Highway Research Board, National Academy of Science, Washington, D.C.
  17. AASHTO (2004) LRFD Bridge Design Specifications, SI Units, Third Edition, Sect.12 (Buried Structures and Tunnel Liners).
  18. Canadian Standards Association (2000) CAN/CSA-S6-00: Canadian Highway Bridge design Code, Rexdale, Ontario.
  19. Timoshenko, S.P. and Gere, J.M. (1961) Theory of elastic stability, 2nded., McGraw-Hill, New-York.
  20. Papangelis, J.P. and Trahair, N.S. (1987) Flexural-torsional buckling or arches. J. Struct. Div., ASCE, Vol. 113, No. 4, 880-906.
  21. Rajasekaran, S. and Padmanbhan, S. (1989) Equations of curved beams. J. Engrg. Mech., ASCE, Vol. 115, No. 5, 1094-1111. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:5(1094)