DOI QR코드

DOI QR Code

An Assessment of the Prestress Force on the Bonded Tendon Using the Strain and the Stress Wave Velocity

변형률과 응력파속도를 이용한 부착식 텐던의 긴장력 평가

  • 장정범 (한국전력공사 전력연구원) ;
  • 황경민 (한국전력공사 전력연구원) ;
  • 이홍표 (한국수력원자력(주) 중앙연구원) ;
  • 김병화 (경남대학교 토목공학과)
  • Received : 2012.03.13
  • Accepted : 2012.04.17
  • Published : 2012.06.30

Abstract

The bonded tendon was adopted to the reactor containment building of some operating nuclear power plants in Korea and the assessment of the prestress force on the bonded tendon is very important for the evaluation of the structural integrity. The prestress force of the bonded tendon at real reactor containment building, was evaluated using the SI technique and impact signal analysis technique which were developed to improve the existing indirect assessmment technique. For these techniques, the strain of the reactor containment building and the stress wave velocity of the bonded tendon were measured. Both SI technique and impact signal analysis technique give the highly reliable results comparison with the existing theoretical approach. Therefore, it is confirmed that the developed techniques are very useful for the evaluation of the prestress force on the bonded tendon.

국내 일부 가동 중 원전의 원자로건물에 부착식 텐던이 시공되어 있고, 이들에 대한 긴장력 평가는 원자로건물의 구조 건전성 평가 시 매우 중요하다. 따라서, 본 논문에서는 기존의 간접적인 부착식 텐던의 긴장력 평가방법을 개선하기 위하여 개발된 SI 기술과 충격신호 분석기술을 이용하여 실제 원자로건물에 매입된 부착식 텐던을 대상으로 긴장력을 평가하였다. 이를 위해 원자로건물에서 발생하는 변형률과 부착식 텐던에서 발생하는 응력파속도를 계측하였다. 이들을 통해 부착식 텐던의 긴장력을 평가한 결과, SI 기술과 충격신호 분석기술 모두 높은 신뢰성 있는 결과를 제시하였고, 기존의 이론적인 접근 방법에 의한 결과와도 매우 유사한 경향을 제시함으로써 본 연구진에서 개발한 부착식 텐던의 긴장력 평가방법이 매우 유용함을 확인할 수 있었다.

Keywords

References

  1. 통상산업부(1994) 차세대 원자로 기술개발(I), 최종보고서.
  2. 장정범, 이홍표, 황경민, 송영철(2010) 부착식 텐던의 유효 긴장력 평가를 위한 최적의 매개변수 결정에 관한 연구. 대한토목학회논문집, 대한토목학회, 제30권 제2A호, pp. 161-168.
  3. 장정범 등(2011) 부착식 텐던의 비파괴 긴장력 평가기술 개발, 최종보고서.
  4. Jang, J.B., Lee, H.P., Hwang, K.M., and Song, Y.C. (2010) A Sensitivity analysis of the key parameters for the prediction of the prestress force on bonded tendons, Nuclear Engineering and Technology, Vol. 42, No. 3, pp. 319-328. https://doi.org/10.5516/NET.2010.42.3.319
  5. 김병화, 장정범, 이홍표(2010) 종진동 특성을 이용한 부착식 텐던의 긴장력 추정 타당성 연구. 대한토목학회논문집, 대한토목학회, 제30권 제2A호, pp. 103-111.
  6. 김병화, 장정범, 이홍표(2011) 부착식 PSC 텐던의 종진동 메카니즘. 대한토목학회논문집, 대한토목학회, 제31권 제3A호, pp. 261-267.
  7. Kim, B.H., Jang, J.B., Lee, H.P., and Lee, D.H. (2010) Effect of prestress force on longitudinal vibration of bonded tendons embeded in a nuclear containment, Nuclear Engineering and Design, Vol. 240(6), pp. 1281-1289. https://doi.org/10.1016/j.nucengdes.2010.02.017
  8. Kim, B.H., Jang, J.B., Lee, H.P., and Lee, D.H. (2012) Evaluating longitudinal vibration characteristics of bonded strands embedded in prestressed concrete beams by a system identification approach, Composites: Part B, 43, pp. 1531-1537. https://doi.org/10.1016/j.compositesb.2011.08.008
  9. CEB-FIP (1990) Comite Euro-International du Beton-CEB-FIP Model Code.
  10. Z.P. Bazant, S.S. Kim (1979) Approximate Relaxation Function for Concrete, Journal of the Structural Division, ASCE, Vol. 105, No. ST12.