DOI QR코드

DOI QR Code

On the fatigue performance of Aluminum alloy 2024 scarfed lap joints

  • Yan, W.Z. (Institute of Aircraft Reliability Engineering, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University) ;
  • Gao, H.S. (Institute of Aircraft Reliability Engineering, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University) ;
  • Yuan, X. (Institute of Aircraft Reliability Engineering, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University) ;
  • Wang, F.S. (Institute of Aircraft Reliability Engineering, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University) ;
  • Yue, Z.F. (Institute of Aircraft Reliability Engineering, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University)
  • Received : 2011.09.27
  • Accepted : 2012.08.09
  • Published : 2012.10.10

Abstract

A series of fatigue test were carried out on scarfed lap joints (SLJ) using in airfoil siding to explore the effect of structural details, such as rows of rivets, lap angles, on its fatigue performance. Finite element (FE) analysis was employed to explore the effect of lap angle on load transfer and the stress evolution around the rivet hole. At last, the fatigue lives were predicted by nominal stress approach and critical plane approach. Both of the test results and predicted results showed that fatigue life of SLJ was remarkably increased after introducing lap angle into the faying surface. Specimen with the lap angle of $1.68^{\circ}$ exhibits the best fatigue performance in the present study.

Keywords

References

  1. Boni, L. and Lanciotti, A. (2011), "Fatigue behaviour of double lap riveted joints assembled with and without interfay sealant", Fatigue Fract. Eng. Mater. Struct., 34(1), 60-71. https://doi.org/10.1111/j.1460-2695.2010.01493.x
  2. Carter, R.W., Steven, J.W., Toivonen, P., Makeev, A. and Newman, J.J. (2006), "Effect of various aircraft production drilling procedures on hole quality", Int. J. Fatigue, 28, 943-950. https://doi.org/10.1016/j.ijfatigue.2005.09.009
  3. Chakherlou, T.N. and Vogwell, J. (2003), "The effect of cold expansion on improving the fatigue life of fastener holes", Eng. Fail. Anal., 10, 13-24. https://doi.org/10.1016/S1350-6307(02)00028-6
  4. De Rijck, J.M.M., Homan, J.J., Schijve, J. and Benedictus, R. (2007), "The driven rivet head dimensions as an indication of the fatigue performance of aircraft lap joints", Int. J. Fatigue, 29, 2208-2218. https://doi.org/10.1016/j.ijfatigue.2006.12.010
  5. Ding, J., Sum, W.S., Sabesan, R., Leen, S.B., McColl, I.R. and Williams, E.J. (2007), "Fretting fatigue predictions in a complex coupling", Int. J. Fatigue, 29, 1229-1244. https://doi.org/10.1016/j.ijfatigue.2006.10.017
  6. Duprat, D., Campassens, D., Balzano, M. and Boudett, R. (1996), "Fatigue life prediction of interference fit fastener and cold worked holes", Int. J. Fatigue, 18(8), 515-521. https://doi.org/10.1016/S0142-1123(96)00044-8
  7. Finney, J.M. and Evans, R.L. (1997), "Extending the fatigue life of multi-layer metal joints", Int. J. Fatigue, 19(3), 265-275.
  8. Goranson, U.G. (1997), "Fatigue issues in aircraft maintenance and repairs", Int. J. Fatigue, 20(6), 413-431.
  9. Hibbit, D., Karlsson, B. and Sorensen, P. (2003), ABAQUS User's Manual, Version 6.4, USA HKS Inc.
  10. Lacarac, V., Smith, D. and Pavier, M. (2001), "The effect of cold expansion on fatigue crack growth from open holes at room and high temperature", Int. J. Fatigue, 23, 161-170. https://doi.org/10.1016/S0142-1123(01)00125-6
  11. Park, C.Y. and Grandt Jr. A.F. (2007), "Effect of load transfer on the cracking behavior at a countersunk fastener hole", Int. J. Fatigue, 29, 146-157. https://doi.org/10.1016/j.ijfatigue.2006.01.014
  12. Shankar, K. and Dhamari, R. (2002), "Fatigue behavior of aluminum alloy 7075 bolted joints treated with oily film corrosion compounds", Mater. Des., 23, 209-216. https://doi.org/10.1016/S0261-3069(01)00060-7
  13. Skorupa, M., Skorupa, A., Machniewicz, T. and Korbel, A. (2010), "Effect of production variables on the fatigue behaviour of riveted lap joints", Int. J. Fatigue, 32(7), 996-1003. https://doi.org/10.1016/j.ijfatigue.2009.11.007
  14. Smith, K.N., Watson, P. and Topper, T.H. (1970), "A stress-strain function for the fatigue of metals", J. Mater., 5(4), 767-778.
  15. Sum, W.S., Williams, E.J. and Leen, S.B. (2005), "Finite element, critical-plane, fatigue life prediction of simple and complex contact configurations", Int. J. Fatigue, 27(4), 403-416. https://doi.org/10.1016/j.ijfatigue.2004.08.001
  16. Yang, J.M., Her, Y.C. and Han, N.L. (2001), "Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes", Mater. Sci. Eng. A, 298, 296-299. https://doi.org/10.1016/S0921-5093(00)01277-6
  17. Zheng, X.L. (1986), "A further study on fatigue crack initiation life mechanical model for fatigue crack initiation", Int. J. Fatigue, 9(1), 17-21.

Cited by

  1. Ultimate shear strength of composite welded steel-aluminium beam subjected to shear load vol.16, pp.1, 2016, https://doi.org/10.1007/s13296-016-3004-1