DOI QR코드

DOI QR Code

Fully Non-Contact Assessment of Acoustic Nonlinearity According to Plastic Deformation in Al6061 Alloy

Al6061 합금의 소성변형에 따른 음향비선형 특성의 완전 비접촉식 평가

  • 이현 (한양대학교 자동차공학과) ;
  • 전청 (한양대학교 자동차공학과) ;
  • 김정석 (한양대학교 자동차공학과) ;
  • 장경영 (한양대학교 기계공학부)
  • Received : 2012.07.02
  • Accepted : 2012.08.14
  • Published : 2012.08.30

Abstract

This study proposes a fully non-contact measurement method to assess acoustic nonlinearity of narrowband surface waves generated by a line-arrayed laser beam by using a laser-ultrasonic detector in the way of two-wave mixing (TWM) method. This method was applied to figure out a relationship between plastic deformation and nonlinearity characteristics of a plastically deformed aluminum specimens. The experimental results showed that the acoustic nonlinearity of the laser-generated surface wave increased proportionally to the level of tensile deformation. This tendency is in good agreement with the result of measurement by contact method with PZT-transducer.

본 연구에서는 표면파의 음향비선형 특성 측정을 위해 선 배열 레이저 빔을 이용하여 협대역의 표면파를 발생시키고 레이저 TWM(Two-Wave Mixing) 방식으로 수신하는 완전 비접촉 측정 방법이 도입되었다. 이 기술은 알루미늄 합금의 소성변형과 음향비선형 특성과의 상관성을 조사하는데 적용되었다. 그 결과, 재료의 소성변형에 따라 음향 비선형성이 비례적으로 증가하는 것으로 나타났으며, 이는 접촉식 PZT 탐촉자 수신 방법으로 측정한 결과와 동일한 경향이다.

Keywords

References

  1. K. Y. Jhang, "Nonlinear Ultrasonic Techniques for Nondestructive Assessment of Micro Damage in Material: A Review," International Journal of Precision Engineering and Manufacturing, Vol. 10, No. 1, pp. 123-135 (2009) https://doi.org/10.1007/s12541-009-0019-y
  2. J. H. Cantrell, "Dependence of microelasticplastic nonlinearity of martensitic stainless steel in fatigue damage accumulation," Journal of Applied Physics, Vol. 100, pp. 063508 (2006) https://doi.org/10.1063/1.2345614
  3. J. L. Blackshire, S. Sathish, J. Na and J, Frouin, "Nonlinear Laser Ultrasonic Measurement of Localized Fatigue Damage," Review of Quantitative Nondestructive Evaluation, Vol. 22, pp. 1479-1488 (2003)
  4. C. B. Scruby and L. E. Drain, "Laser Ultrasonics: Techniques and Applications," Adan Hilger, Bristol (1990)
  5. T. H. Nam, S. H. Choi, T. H. Lee and K. Y. Jhang, C. S. Kim, "Acoustic Nonlinearity of Narrowband Laser-generated Surface waves in the Bending Fatigue of Al6061 Alloy," Journal of the Korean Physical Society, Vol. 97, pp. 1212-1217 (2010) https://doi.org/10.3938/jkps.57.1212
  6. C. S. Kim, T. Y. Nam, S. H. Choi and K. Y. Jhang, "Assessment of Plastic Deformation in Al6061 Alloy Using Acoustic Nonlinearity of Laser-Generated Surface Wave," Journal of the Korean Society for Nondestructive Testing, vol. 32, No. 1, pp. 20-26 (2012) https://doi.org/10.7779/JKSNT.2012.32.1.020
  7. S. H. Choi, T. H. Nam, K. Y. Jhang and C. S. Kim, "Frequency Response of Narrowband Surface Waves Generated by Laser Beams Spatially Modulated with a Line-arrayed Slit Mask," Journal of the Korean Physical Society, Vol. 60, No. 1, pp. 26-30 (2012) https://doi.org/10.3938/jkps.60.26
  8. A. Blouin, J. P. Monchalin, "Detection of Ultrasonic Motion of a Scattering Surface by Two-wave Mixing in A Photorefractive GaAs Crystal", Applied Physics Letter, Vol. 65, No. 8, pp. 932-934 (1994) https://doi.org/10.1063/1.112153
  9. G. Shui, J. Y. Kim, J. Qu, Y. S. Wang and L. J. Jacobs, "Anew technique for measuring the acoustic nonlinearity of meterials using Rayleigh waves," NDT & E International, Vol. 41, pp. 326-329 (2008) https://doi.org/10.1016/j.ndteint.2008.01.007

Cited by

  1. Ultrasonic Nonlinearity of AISI316 Austenitic Steel Subjected to Long-Term Isothermal Aging vol.34, pp.3, 2014, https://doi.org/10.7779/JKSNT.2014.34.3.241
  2. Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver vol.38, pp.10, 2014, https://doi.org/10.3795/KSME-A.2014.38.10.1133
  3. Non-contact measurement of elastic modulus by using laser ultrasound vol.16, pp.5, 2015, https://doi.org/10.1007/s12541-015-0118-x