DOI QR코드

DOI QR Code

Reaction Characteristics of WGS Catalyst for SEWGS Process in a Pressurized Fluidized Bed Reactor

가압 유동층 반응기에서 SEWGS 공정을 위한 WGS 촉매의 반응특성

  • Received : 2012.07.31
  • Accepted : 2012.08.24
  • Published : 2012.08.31

Abstract

To check effects of operating variables on reaction characteristics of WGS catalyst for SEWGS process, water gas shift reaction tests were carried out in a pressurized fluidized bed reactor using commercial WGS catalyst and sand(as a substitute for $CO_2$ absorbent) as bed materials. Simulated syngas(mixed with $N_2$) was used as a reactant gas. Operating temperature was $210^{\circ}C$ and operating pressure was 20 bar. WGS catalyst content, steam/CO ratio, gas velocity, and syngas concentration were considered as experimental variables. CO conversion increased as the catalyst content and steam/CO ratio increased. CO conversion at fluidized bed condition was higher than that of fixed bed condition. However, CO conversion were maintained almost same value within the fluidized bed condition. CO conversion decreased as the syngas concentration increased. The optimum operation condition was confirmed and long time water gas shift reaction test up to 24 hours at the optimum operating conditions was carried out.

Keywords

References

  1. R. James, "Clean Coal technology Status: CO2 Capture and Storage", Technology Briefing for Colorado Rural Electric Association, EPRI, 2007.
  2. H. J. Ryu, "Selection of Process Configuration and Operating Conditions for SEWGS System", Trans. of the Korean Hydrogen and New Energy Society, Vol. 20, No. 2, 2009, p. 168.
  3. H. J. Ryu, J. S. Hyun, H. Kim and T. S. Hwang, "Reaction Characteristics of WGS Catalyst with Fraction of Catalyst in a Batch Type Fluidized Bed Reactor", Trans. of the Korean Hydrogen and New Energy Society, Vol. 22, No. 4, 2011, p. 465.
  4. J. B. Lee, T. H. Eom, D. H. Choi, K. W. Park, J. Ryu, J. I. Baek, C. K. Ryu, H. J. Ryu, "Study on Hybrid Materials of WGS Cataylst and $CO_{2}$ Sorbent for SEWGS Process", International Symposium on Low Carbon & Renewable Energy Technology, Lotte Hotel, Jeju, Korea, 2010, p. 372.
  5. J. M. Lee, Y. J. Min, K. B. Lee, S. G. Jeon, J. G. Na and H. J. Ryu, "Enhancement of $CO_{2}$ Sorption Uptake on Hydrotalcite by Impregnation with $K_{2}CO_{3}$", Langmuir, Vol. 26, No. 24, 2010, p. 18788. https://doi.org/10.1021/la102974s
  6. H. J. Ryu, C. K. Yi, D. Shun, G. T. Jin, "Conceptual Design and Performance Estimation of SEWGS Process for Precombustion $CO_{2}$ Capture", Theories and Applications of Chem. Eng., Vol. 14, No. 2, 2008, p. 293.
  7. H. J. Ryu, H. S. Kim, C. K. Yi, S. H. Jo, J. H. Moon, J. C. Kim, "Reactivity Analysis of $CO_{2}$ Absorbent-WGS Catalyst One Body Particles for SEWGS", Theories and Applications of Chem. Eng., Vol. 16, No. 2, 2010, p. 279.
  8. H. J. Ryu, D. H. Bae, S. Y. Lee, D. Shun, "Reactivity Analysis of WGS Catalysts for SEWGS Process", Theories and Applications of Chem. Eng., Vol. 16, No. 2, 2010, p. 272.

Cited by

  1. Capture vol.24, pp.5, 2013, https://doi.org/10.7316/KHNES.2013.24.5.428
  2. Attrition Characteristics of WGS Catalysts for SEWGS System vol.25, pp.2, 2014, https://doi.org/10.7316/KHNES.2014.25.2.122
  3. Effect of Pre-treatment Method on Reactivity of WGS Catalyst for SEWGS System vol.25, pp.4, 2014, https://doi.org/10.7316/KHNES.2014.25.4.355
  4. Comparison of Solid Circulation Characteristics with Change of Lower Loop Seal Geometry in a Circulating Fluidized Bed vol.52, pp.4, 2014, https://doi.org/10.9713/kcer.2014.52.4.522
  5. CO Conversion Characteristics of WGS Catalysts for SEWGS System vol.26, pp.2, 2015, https://doi.org/10.7316/KHNES.2015.26.2.096