The Journal of the Korean dental association (대한치과의사협회지)

The Korean Dental Association (대한치과의사협회)
권호 표지

The removable prosthetic restorations utilizing CAD/CAM system

임상가를 위한 특집 4 - CAD/CAM 시스템을 이용한 가철성 보철 수복

  • Park, Ji-Man (Department of Dentistry, School of Medicine, Ewha Womans University) ;
  • Park, Eun-Jin (Department of Dentistry, School of Medicine, Ewha Womans University) ;
  • Kim, Seong-Kyun (Department of Prosthodontics, School of Dentistry, Seoul National University) ;
  • Koak, Jai-Young (Department of Prosthodontics, School of Dentistry, Seoul National University) ;
  • Heo, Seong-Joo (Department of Prosthodontics, School of Dentistry, Seoul National University)
  • 박지만 (이화여자대학교 의학전문대학원 치과학교실) ;
  • 박은진 (이화여자대학교 의학전문대학원 치과학교실) ;
  • 김성균 (서울대학교 치의학전문대학원 치과보철학교실) ;
  • 곽재영 (서울대학교 치의학전문대학원 치과보철학교실) ;
  • 허성주 (서울대학교 치의학전문대학원 치과보철학교실)
  • Received : 2012.02.14
  • Accepted : 2012.02.23
  • Published : 2012.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, the digital solution of fabricating removable prosthesis by applying haptic input device, electronic surveying, and rapid prototyping was introduced. This review article covers the concept of electronic surveying, computer-aided denture framework designing procedure, discussions after several digital denture cases, directions of future development, such as digital tooth arrangement and RP flasking.

Keywords

References

  1. Fasbinder DJ. Clinical performance of chairside CAD/CAM restorations. J Am Dent Assoc 2006;137:22S-31S.
  2. Syrek A, Reich G, Ranftl D, Klein C, Cerny B, Brodesser J. Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of acti ve wavefront sampling. J Dent 2010;38:553-9. https://doi.org/10.1016/j.jdent.2010.03.015
  3. Han J, Wang Y, Lu P. A preliminary report of designing removable partial denture frameworks using a specifically developed software package. Int J Prosthodont 2010;23:370-5.
  4. Eggbeer D, Bibb R, Williams R. The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks. Proc Inst Mech Eng H 2005;219:195-202.
  5. Williams RJ, Bibb R, Rafik T. A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. J Prosthet Dent 2004;91:85-8. https://doi.org/10.1016/j.prosdent.2003.10.002
  6. Williams RJ, Bibb R, Eggbeer D, Collis J. Use of CAD/CAM technology to fabricate a removable partial denture framework. J Prosthet Dent2006;96:96-9. https://doi.org/10.1016/j.prosdent.2006.05.029
  7. Williams RJ, Bibb R, Eggbeer D. CAD/CAM in the Fabrication of Removable Partial Denture Frameworks: A Virtual Method of Surveying 3D Scanned Dental Casts. Quintessence J Dent Technol 2004;2:268-76.
  8. Bibb RJ, Eggbeer D, Williams RJ, Woodward A. Trial fitting of a removable partial denture framework made using computer-aided design and rapid prototyping techniques. ProclnstMechEng H 2006;220:793-7.
  9. Pham DT, Gault RS. A comparison of rapid prototyping technologies. Int J Mach Tool Manuf 1998;38:1257-87. https://doi.org/10.1016/S0890-6955(97)00137-5
  10. Yadroitsev I, Bertrand Ph, Smurov I. Parametric analysis of the selective laser melting process. Appl Surf Sci 2007;253:8064-9. https://doi.org/10.1016/j.apsusc.2007.02.088
  11. K Dai, L Shaw. Thermal and stress modeling of multi-material laser processing. Acta Materialia 2001;49(20):4171-4181. https://doi.org/10.1016/S1359-6454(01)00312-3
  12. K Dai, L Shaw. Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders. Acta Materialia 2004;52(1):69-80. https://doi.org/10.1016/j.actamat.2003.08.028
  13. Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dent Mater 2008;24(10):1400-4. https://doi.org/10.1016/j.dental.2008.03.001
  14. Kibi M, Ono T, Dong J, Mitta K, Gonda T, MaedaY. Development of an RPD CAD system with finite element stress analysis. J Oral Rehabil 2009;36:442-50. https://doi.org/10.1111/j.1365-2842.2009.01949.x
  15. Sun Y, Lu P, Wang Y. Study on CAD&RP for removable complete denture. Comput Methods Programs Biomed 2009;93:266-72. https://doi.org/10.1016/j.cmpb.2008.10.003