KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study of Flexural Strengthening Method of Reinforced Concrete Beams with Near Surface Mounted CFRP Strips

탄소섬유판 (CFRP) 표면매립 (NSM) 공법을 이용한 콘크리트 구조물 휨 보강에 관한 실험 연구

  • 임동환 (동서대학교 토목공학과)
  • Received : 2012.08.21
  • Accepted : 2012.12.05
  • Published : 2013.02.04
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to establish the flexural strengthening method of the concrete members. To accomplish this objective, a total of seven concrete beams were tested. From this study, it is found that the initial flexural stiffness and strength of the beams reinforced with NSM CFRP strips were significantly improved compared to the beam without CFRP strip. Failure of the beam reinforced with NSM strips is initiated by failure of NSM strips, eventually sudden explosive compressive failure in the loaded region. This strengthening method combined with NSM CFRP strips and high performance mortar for concrete cover recovery is evaluated by a good strengthening method for the strength, durability and good appearance of concrete structures.

본 연구에서는 탄소섬유판을 콘크리트 표면에 매립하는 표면매립(NSM) 공법을 적용하여 콘크리트 구조물 보강을 수행하고, 콘크리트 내구성 증진 뿐 아니라 구조물 수명을 향상 시킬 수 있는 노후구조물 보수 보강 체계를 구축하고자 하였다. 이를 위하여, 표면매립 탄소섬유판 및 고성능 단면복구 모르터로 보강된 철근 콘크리트 부재를 제작하여 실험을 수행하였다. 실험결과, 에폭시로 탄소섬유판을 매립 부착한 철근콘크리트 부재는 보강되지 않은 부재보다 초기 강성 및 휨강도가 현저하게 증가하는 것으로 나타났다. 탄소섬유판으로 보강된 철근콘크리트 부재는 탄소섬유판의 인장 파괴로 인하여 시작되며, 탄소섬유판의 저항능력은 매우 우수하며, 보강 효율이 우수한 것으로 나타났다. 탄소섬유판을 매립하고 표면부에 고성능 모르터로 단면을 복구하는 보강 방식은 보의 강성 및 내구성을 향상시킬 뿐 아니라 미관이 우수하여 보수와 보강이 혼합된 적절한 보강 방식으로 판단된다.

Keywords

References

  1. De Lorenzis, L. and Teng, J.G. (2007) Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures. ELSEVIER, Composite Part B, Vol. 38, pp. 119-143. https://doi.org/10.1016/j.compositesb.2006.08.003
  2. Hassen, T. and Rizkalla, S. (2004) Bond Mechanism of Near- Surface-Mounted Fiber-Reinforced Polymer Bars For Flexural Strengthening of Concrete Structures. ACI Structural Journal, Vol. 101, No. 6, pp. 830-838.
  3. Novidis, D., Pantazopoulou, S.J. and Tentoluris, E. (2007) Experimental study of bond of NSM-FRP reinforcement. ELSEVIER. Construction Building Materials, Vol. 27, pp. 1760-1770.
  4. Rizkalla, S. and EI-Hacha, R. (2004) Near-Surface-Mou-nted Fiber- Reinforced Polymer Reinforcements for Flexural Strengthening of Concrete Structures. ACI Structural Journal, Vol. 101, No. 5, pp. 717-726.
  5. Taljsten, B., Carolin, A. and Nordin, H. (2003) Concrete structures strengthened with near surface mounted reinforcement of CFRP. Adv, Structure Engineering, Vol. 6, No. 3, pp. 201-213. https://doi.org/10.1260/136943303322419223
  6. Oehlers, D.J., Liu, I. and Seracino, R. (2007) Ageneric design approach for EB and NSM longitudinally plated RC beams. ELSEVIER, Construction Building Materials, Vol. 21, pp. 697-708. https://doi.org/10.1016/j.conbuildmat.2006.06.018
  7. De Lorenzis, L., Lundgren, K. and Rizzo, A.(2004) Anchorage length of near-surface mounted fiber-reinforced polymer bars for concrete strengthening-experimental investigation and numerical modeling. ACI Structural Journal,Vol. 101, No. 2, pp. 269-278.
  8. Seracino, R., Raizal Saifulnaz, M.R. and Oehlers, D.J. (2007) Generic intermediate crack debonding resistance of EB and NSM plate-to-concrete joints. ASCE Composite Construction Journal, Vol. 11, No. 1, pp. 62-70. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:1(62)
  9. Lim, D.H. and Nam M.H. (2008) Shear Behavior of Reinforced Concrete Beams Strengthened with CFRP strips. Journal of the Korea Concrete Institute, Vol. 20, NO. 3, pp. 299-305. https://doi.org/10.4334/JKCI.2008.20.3.299
  10. Lim, D.H. (2008) An Experimental Study on the Flexural Behavior of RC Beams Strengthened with NSM and EBR CFRP Strips. Journal of the Korea Concrete Institute, Vol. 20, No. 5, pp. 601-610. https://doi.org/10.4334/JKCI.2008.20.5.601
  11. Jung, W.T., Park, J.S., Park, Y.H. and Kang, J.Y. (2007) A Study on Flexural Strengthening of Reinforced Concrete Beams with Near Surface Mounted Reinforcement. Journal of the Korean Society of Civil Engineers, Vol. 27, No. 1A, pp. 27-33.
  12. Jung, W.T., Park, J.S. and Park, Y.H. (2008) Prediction of Failure Modes for Reinforced Concrete Beams Strengthened with NSM CFRP Reinforcement. Journal of the Korean Society of Civil Engineers, Vol. 28, No. 3A, pp. 349-356.
  13. Jung, W.T., Park, J.S., Park, Y.H. and Kim, C.Y. (2011) Strengthening Effect of Reinforced Concrete Beams Strengthened with NSM CFRP Reinforcements and Various Reinforcement Details. Journal of the Korea Concrete Institute, Vol. 23, No. 6, pp. 781-790. https://doi.org/10.4334/JKCI.2011.23.6.781

Cited by

  1. Mechanical properties of GFRP slip-form for in-situ application vol.20, pp.5, 2016, https://doi.org/10.1007/s12205-015-0274-7