DOI QR코드

DOI QR Code

연속식 미생물연료전지 성능에 미치는 운전변수의 영향

Effects of operating parameters on the performance of continuous flow microbial fuel cell

  • 정재우 (경남과학기술대학교 환경공학과, 녹색기술연구소) ;
  • 최영대 (경남과학기술대학교 환경공학과, 녹색기술연구소) ;
  • 이명은 (경남과학기술대학교 환경공학과, 녹색기술연구소) ;
  • 송영채 (한국해양대학교 환경공학과) ;
  • 우정희 (한국해양대학교 환경공학과) ;
  • 유규선 (전주대학교 토목환경공학과) ;
  • 이채영 (수원대학교 토목공학과)
  • Chung, Jae-Woo (Department of Environmental Engineering, Green Technology Institute, Gyeongnam National University of Science and Technology) ;
  • Choi, Young-Dae (Department of Environmental Engineering, Green Technology Institute, Gyeongnam National University of Science and Technology) ;
  • Lee, Myoung-Eun (Department of Environmental Engineering, Green Technology Institute, Gyeongnam National University of Science and Technology) ;
  • Song, Young-Chae (Department of Environmental Engineering, Korea Maritime University) ;
  • Woo, Jung-Hui (Department of Environmental Engineering, Korea Maritime University) ;
  • Yoo, Kyu-Seon (Department of Civil and Environmental Engineering, Jeonju University) ;
  • Lee, Chae-Young (Department of Civil Engineering, The University of Suwon)
  • 투고 : 2012.03.25
  • 심사 : 2013.08.14
  • 발행 : 2013.08.15

초록

Effects of operating parameters such as hydraulic retention time(HRT), recycle ratio and influent COD concentration on the performance of a continuous flow microbial fuel cell(MFC) were investigated. Decrease of HRT improved mass transfer of substrate to electrogenic microorganisms, therefore resulting in increased electrode voltage and power generation of MFC. Increase of HRT promoted COD removal by elongating retention time for COD removal in MFC. Recycling of effluent increased the COD removal and coulombic efficiencies by returning suspended microorganisms into MFC. Increase of influent COD enhanced COD removal due to the improved mass transfer of substrate. Decrease of coulombic efficiency by the increase of the HRT and influent COD concentration indicated that they enhanced the activities of fermentative bacteria.

키워드

참고문헌

  1. APHA, AWWA, WEF (1992) Standard methods for the examination of water and wastewater. 18th ed., Greenberg, A. E., Clesceri, L. S. and Eaton, A. D.(Eds.).
  2. Feng, Y., Lee, H., Wang, X., Liu, Y., He, W. (2010) Continuous electricity generation by a graphite granule baffled air-cathode microbial fuel cell, Bioresource Technology, 101(2), pp. 632-638. https://doi.org/10.1016/j.biortech.2009.08.046
  3. Lee, M . E., Jo, S. Y., Chung, J. W., Song, Y. C., Woo, J. H., Yoo, K. S., Lee, C. Y. (2011) Effect of external resistance on electrical properties of two-chamber type microbial fuel cell, J. Kor. Soc. Environ. Eng., 33(3), pp. 163-173.
  4. Liang, P., Huang, X., Fan, M. Z., Cao, X. X., Wang, C. (2007) Composition and distribution of internal resistance in three types of microbial fuel cells, Appl. Microbiol. Biotechnol., 77(3), pp. 551-558. https://doi.org/10.1007/s00253-007-1193-4
  5. Logan, B. E. (2007) Microbial fuel cells. pp. 200, Wiley-Interscience.
  6. Logan, B. E., Hamelers, B., Rozendal, R., Schroder, U., Keller, J., Freguia, S., Aelterman, P., Verstraete, W., Rabaey, K. (2007) Microbial fuel cells: methodology and technology, Environ. Sci. Technol., 40(17), pp. 5181-5192.
  7. Lorenzo, M. D., Curtis, T. P., Head, I. M., Scott, K. (2009) A single-chamber microbial fuel cell as a biosensor for wastewaters, Water research, 43(13), pp. 3145-3154. https://doi.org/10.1016/j.watres.2009.01.005
  8. Rabaey, K., Verstraete, W. (2005) Microbial fuel cells : novel biotechnology for energy generation, Trends in Biotechnol., 23(6), pp. 291-298. https://doi.org/10.1016/j.tibtech.2005.04.008
  9. Song, Y. C., Choi, T. S., Woo, J. H., Yoo, K., Chung, J. W., Lee, C. Y., Kim, B. K. (2012a) Effect of the oxygen reduction catalyst loading method on the performance of air breathable cathodes for microbial fuel cells, J. Appl. Electrocehm., 42(6), pp. 391-398. https://doi.org/10.1007/s10800-012-0410-8
  10. Song, Y. C., Kim, D. S., Woo J. H., Yoo K., Chung, J. W., Lee C. Y. (2012b) Modification of anode surface with hydrogel and multiwall carbon nanotube for high performance of microbial fuel cell, J. Kor. Soc. Environ. Eng., 34(11), pp. 757-764. https://doi.org/10.4491/KSEE.2012.34.11.757
  11. Song, Y. C., Yoo, K. S., Lee, S. K. (2010) Surface floating, air cathode, microbial fuel cell with horizontal flow for continuous power production from wastewater, J. Power Sour., 195(19), pp. 6478-6482. https://doi.org/10.1016/j.jpowsour.2010.04.041
  12. Wen, Q., Wu, Y., Zhao L., Sun, Q. (2010) Production of electricity from the treatment of continuous brewery wastewater using a microbial fuel cell, Fuel, 89(7), pp. 1381-1385. https://doi.org/10.1016/j.fuel.2009.11.004
  13. Yoo, K., Park, H., Song, Y. C., Woo, J. H., Lee, C. Y., Chung, J. W. (2012) The effect of conductivity and CNT cathode on electricity generation in air-cathode microbial fuel cell, J. Kor. Soc. Water and Wastewater, 26(3), pp. 355-360. https://doi.org/10.11001/jksww.2012.26.3.355