Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Vibration Analysis Algorithm for Joined Conical-cylindrical Shell Structures using Transfer of Influence Coefficient

  • Yeo, Dong-Jun (Department of Power System Engineering, Chonnam National University) ;
  • Choi, Myung-Soo (Department of Maritime Police Science, Chonnam National University)
  • Received : 2012.11.30
  • Accepted : 2013.01.18
  • Published : 2013.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

This describes the formulation for the free vibration of joined conical-cylindrical shells with uniform thickness using the transfer of influence coefficient. This method was developed based on successive transmission of dynamic influence coefficients, which were defined as the relationships between the displacement and the force vectors at arbitrary nodal circles of the system. The two edges of the shell having arbitrary boundary conditions are supported by several elastic springs with meridional/axial, circumferential, radial and rotational stiffness, respectively. The governing equations of vibration of a conical shell, including a cylindrical shell, are written as a coupled set of first order differential equations by using the transfer matrix of the shell. Once the transfer matrix of a single component has been determined, the entire structure matrix is obtained by the product of each component matrix and the joining matrix. The natural frequencies and the modes of vibration were calculated numerically for joined conical-cylindrical shells. The validity of the present method is demonstrated through simple numerical examples, and through comparison with the results of previous researchers.

Keywords

References

  1. A. A. El Damatty, M. S. Saafan and A. M. I. Sweedan, 2005, "Dynamic Characteristics of Combined Conical-cylindrical Shells", Thin-Walled Structures, Vol. 43, No. 9, pp. 1380-1397. https://doi.org/10.1016/j.tws.2005.04.002
  2. B. P. Patel, M. Ganapathi and S. Kamat, 2000, "Free Vibration Characteristics of Laminated Composite Joined Conical-cylindrical Shells", Journal of Sound and Vibration, Vol. 237, No. 5, pp. 920-930. https://doi.org/10.1006/jsvi.2000.3018
  3. T. Irie, G. Yamada and Y. Muramoto, 1984, "Free Vibration of Joined Conical-cylindrical Shells", Vol. 95, No. 1, pp. 31-39. https://doi.org/10.1016/0022-460X(84)90256-6
  4. E. Efraim and M. Eisenberger, 2006, "Exact Vibration Frequencies of Segmented Axisymmetric Shells", Thin-Walled Structures, Vol. 44, No. 3, pp. 281-289. https://doi.org/10.1016/j.tws.2006.03.006
  5. M. Caresta and N. J. Kessissoglou, 2010, "Free Vibrational Characteristics of Isotropic Coupled Cylindrical-conical Shells", Journal of Sound and Vibration, Vol. 329, No. 6, pp. 733-751. https://doi.org/10.1016/j.jsv.2009.10.003
  6. Y. S. Lee, M. S. Yang, H. S. Kim and J. H. Kim, 2002, "A study on the Free Vibration of the Joined Cylindrical-spherical Shell Structures", Computer and Structures, Vol. 80, pp. 2405-2414. https://doi.org/10.1016/S0045-7949(02)00243-2
  7. W. Soedel, 1993, "Vibration of Shells and Plates", Marcel Dekker, Hongkong.
  8. D. J. Yeo, 2005, "Development of Vibrational Analysis Algorithm for Truncated Conical Shells", Journal of the Korean Society for Power System Engineering, Vol. 9, No. 3, pp. 58-65.
  9. D. J. Yeo and I. S. Cho, 2008, "Vibration Characteristics of Conical Shells with Linearly Varying Thickness", Journal of the Korean Society for Power System Engineering, Vol. 12, No. 2, pp. 35-40.
  10. W. Flügge, 1973, "Stress in Shells, Springer- Verlag", Berlin.

Cited by

  1. 실베스터-전달강성계수법을 이용한 축대칭 환원판의 굽힘 자유진동 해석 vol.19, pp.6, 2013, https://doi.org/10.9726/kspse.2015.19.6.060
  2. Free vibration analysis of coupled structures of laminated composite conical, cylindrical and spherical shells based on the spectral-Tchebychev technique vol.281, pp.None, 2022, https://doi.org/10.1016/j.compstruct.2021.114965