Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Adsorption and Desorption Enhance Effect of Oyster Shell Using Peltier Element

페르체소자를 이용한 굴패각의 흡착 및 탈착촉진효과에 관한 연구

  • Kim, Myoung-Jun (Department of Power System Engineering, Kunsan National University)
  • 김명준 (군산대학교 동력기계시스템공학과)
  • Received : 2012.10.29
  • Accepted : 2013.01.03
  • Published : 2013.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

This study is experimentally performed for using the oyster shell as a desiccant in the batch type system. The peltier element(thermoelectric device) is used for absorbing and releasing the adsorption and desorption heat generation. The cooling and heating effects of peltier element exist in this experiment and these effects are generally known phenomena among some references. The increase in electric current induced into peltier element is effectively release the heat generation of adsorption and desorption. Consequently, the non-dimensional adsorption and desorption amount would increase with increase in electric current. However, in the case of adsorption, the increase of induced current into peltier element, the heat of cold side can not release sufficiently. So the heat of hot side of peltier is transferred into the cold side.

Keywords

References

  1. S. H. Lee., 2000, "Environmental Protection and Ecological Ethics" The Korean Ethics Studies Association, Vol. 44, No.1, pp. 65-82
  2. C. D. Cooer and F. C., Alley, 1994, "Air Pollution Control: A Design Approach" PROSPECT HEIGHTS, IL: Waveland Press, Inc., pp. 569-580.
  3. J. Benitez, 1993, "Process engineering and design for air pollution control", Englewood Cliffs, NJ:PRT Prentice Hall, Vol. 331, pp. 414-421.
  4. A. J. Buonicore and W. T. Davis, 1992, "Air Pollution Engineering Manual", New York: Van Nostrand Reinhold.
  5. N. de Nevers, 1995, "Air Pollution Control Engineering", New York: McGraw Hill.
  6. K. E. Noll, V. Gounaris and W. S. How, 1992, "Adsorption Technology", Ann Arbor, MI: Lewis Publishers, Inc.
  7. M. M. Dubinin, 1995, "The potential theory of adsorption of gases and vapors for adsorbents with energetically nonuniform surfaces", Chemical Reviews, pp. 235-241.
  8. M. Polanyi, 1932, "Theories of the adsorption of gases", A general survey and some additional remarks, Transactions of the Faraday Society, 28, pp. 316-331.
  9. T. M. Aminabhavi and H. G. Naik, 1998, "Chemical compatibility study of geomembranessorption/ desorption, diffusion and swelling phenomena", Journal of hazardous materials, Vol. 60, No. 2, pp. 175-203 https://doi.org/10.1016/S0304-3894(98)00090-9
  10. G. L. Solbrekken and C. P. Chiu, 1998, "Single Temperature Calibration Method for Die Level Temperature Sensors. Using a Single Temperature Technique", IEEE Transs. Components and Packing Tech., Vol. 23, No. 1, pp. 40-46
  11. M. J. Kim and J. S. Yu., 2008, "Fundamental Study on the Probability of Oyster Shell Desiccant Cooling System Driven by Renewable Energy of Photo-Voltaic Effect", Journal of the Korean Society of Marine Engineering, Vol. 32, No. 3, pp. 387-393. https://doi.org/10.5916/jkosme.2008.32.3.387
  12. M. J. Kim and G. H. Chea, 2011, "Study on the PV Driven Dehumidifying System with Oyster Shell and Thermoelectric Device", International Symposium on Marine Engineering and Technology, pp. 108-110.

Cited by

  1. Study on novel nano mahua methyl ester powered DI diesel engine preheated with a thermoelectric waste heat recovery system vol.43, pp.24, 2013, https://doi.org/10.1080/15567036.2019.1587100