DOI QR코드

DOI QR Code

태양광 모듈의 구조디자인과 설치각도에 따른 출력예측

Prediction of Output Power for PV Module with Tilted Angle and Structural Design

  • 고재우 (건국대학교 전기공학과) ;
  • 윤나리 (현대중공업, 그린에너지사업본부 태양광연구실) ;
  • 민용기 (건국대학교 전기공학과) ;
  • 정태희 (한국에너지기술연구원, 태양에너지 연구단) ;
  • 원창섭 (LS산전, 스마트그리드연구단 전력변환연구팀) ;
  • 안형근 (건국대학교 전기공학과)
  • Ko, Jae-Woo (Dept. of Electrical Engineering, Konkuk University) ;
  • Yun, Na-Ri (Photovoltaic Research department, Hyundai Heavy Industries) ;
  • Min, Yong-Ki (Dept. of Electrical Engineering, Konkuk University) ;
  • Jung, Tae-Hee (Solar Energy department, Korea Institute of Energy Research) ;
  • Won, Chang-Sub (Smart Grid Lab, Power Conversion Team, LS) ;
  • Ahn, Hyung-Keun (Dept. of Electrical Engineering, Konkuk University)
  • 투고 : 2012.11.05
  • 심사 : 2013.02.19
  • 발행 : 2013.03.01

초록

A new model about output power prediction of PV module with various tilted angles and cell to cell distances has been proposed in this paper. Light intensity arrived on a solar cell could be changed by characteristics of PV module materials. Refractive indices, thickness and absorption coefficients of glass, EVA, solar cell and Backsheet are used to predict output. Also, the incident angle of light is changed 0 to 90[$^{\circ}$] and cell to cell distances are 5, 10 15[mm]. Two types of light incident on a solar cell are considered which are direct to a solar cell and reflected from Backsheet. The intensity of the incident light directly into the solar cell is reduced through glass and EVA about 17.5[%] in theoretical way. It has an error of 2.26[%] compared with experimental result. The results for compare theoretical with experimental data is validated within the error of 6.3[%]. This paper would be a research material to predict output power when the PV module is installed outdoor or a building.

키워드

참고문헌

  1. J. Kong, Y. Ji, K. Kang, K. Yoo, H. Ahn, D. Han, "Initial Pout Changes by Optical Characteristics of Photovoltaic module", Proceedings of the KSES autumn annual conference, Vol. 30, No.2, 2010
  2. H. Gunerhan, A. Hepbasli, "Determination of the optimum tilt angle of solar collectors for building applications", Building and Environment, 2007
  3. J. Song, J. Yoon, Y. Ahn, S. Kim, S. Lee, Y. Chung, "Power Performance Characteristics of Transparent Thin-film BIPV Module depending on an installation angle", Proceedings of the KSES autumn annual conference, Vol. 28, No. 2, 2008
  4. Z.H. Lu, Q. Yao, "Energy analysis of silicon solar cell modules based on an optical model for arbitrary layers", Solar Energy, Vol. 81, pp.636-647, 2007 https://doi.org/10.1016/j.solener.2006.08.014
  5. H. Wada, F. Yamamoto, K. Ueta, T. Yamaguchi, "Generation characteristics of 100kW PV system with various tilt angle and direction arrays", Solar Energy Materials & Solar Cells, Vol. 95, pp. 382-385, 2011 https://doi.org/10.1016/j.solmat.2010.04.016
  6. S. Krauter, P. Grunow, "Optical simulation to enhance PV module encapsulation", Proceedings of the 21st European Photovoltaic Solar Energy Conference and Exhibition, pp.2065-2068, 2006
  7. Eugene Hecht, "Optics", Addison Wesley, 2002
  8. M. Chegaar, Z. Ouennoughi, F. Guechi, H. Langueur, "Determination of solar cells parameters under illuminated conditions", Journal of Electron Devices, Vol.2, pp.17-21, 2003
  9. J. Lee, "Solar Cell Engineering", Green, pp. 38-38. 2007
  10. H. Choi, D. Choi, H. Yoo, S. Choi, Y. Kim, "A Study on the Photovoltaic Array Optimal Arrangement Considering Power Output", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 23, No.12, 2009 https://doi.org/10.5207/JIEIE.2009.23.12.096

피인용 문헌

  1. Development of Daily PV Power Forecasting Models using ELM vol.64, pp.3, 2015, https://doi.org/10.5370/KIEEP.2015.64.3.164