Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지
DOI QR코드

DOI QR Code

Technology of thin Film Formation by Using the Micro Gravure Coater

마이크로 그라비어 코터를 이용한 박막 형성 기술

  • Kim, Dong Soo (Faculty of Global convergence studies, Hanbat National Univ.) ;
  • Kim, Jung Su (Printed Electronics Research Team, PEMS Co. Ltd.) ;
  • Bae, Sung Woo (Department of Energy and Materials Engineering, Dongguk Univ.)
  • 김동수 (한밭대학교 글로벌융합학부) ;
  • 김정수 (주식회사 펨스 인쇄전자연구팀) ;
  • 배성우 (동국대학교 융합에너지신소재공학과)
  • Received : 2013.04.11
  • Accepted : 2013.05.24
  • Published : 2013.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

We report here on the processing and manufacturing of thin film for printed electronics by micro-gravure coating system. The micro-gravure coating systems are consisted of various modules such as web and system tension controller, micro-gravure coating units, dispenser and hybrid dry units (UV, NIR, Hot air). Especially, for the optimization of system, the number of idle roller was minimized and tension isolating infeeder was included. Also, we applied four patterns circle, 45 degree, square and 35 degree for the optimizing coating thickness. The micro-gravure coating system which applied various patterns to enable continuous coating process and fast coating time compare with conventional batch coating system. In this paper, introduce of micro-gravure coating system and testing results of coating thickness (20~700nm), coating time (1~2sec) and surface roughness (3~12nm) by using micro-gravure coating system.

Keywords

References

  1. Kim, D. S., "Ultra Precision Continuous Manufacturing System for Printed Electronics," Printed Electronics in USA, 2012.
  2. Kim, J. S., "A Thin Film Forming Technique base on a Hybrid Spray Coating using Electro Static Force and Air Pressure," Ph.D. Thesis, Pusan National University, 2012.