한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제22권5호
  • /
  • Pages.806-811
  • /
  • 2013
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

자동차 범퍼빔용 일방향 유리섬유 프리프레그의 제조 및 특성평가

Fabrication and Characterization Evaluation of Prepreg with Unidirectional Glass Fibers for Use of Automobile Bumper Beams

  • Kim, Hyoung-Seok (Department of Mechatronics Engineering, Chosun University) ;
  • Kim, Jin-Woo (Department of Mechatronics Engineering, Chosun University) ;
  • Seo, Jin (Department of Advanced Parts and Materials Engineering, Chosun University Graduate School) ;
  • Lee, Dong-Gi (Department of Mechatronics Engineering, Chosun University) ;
  • Sim, Jae-Ki (Department of Mechatronics Engineering, Chosun University)
  • 투고 : 2013.07.15
  • 심사 : 2013.09.04
  • 발행 : 2013.10.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, to prevent the nonhomogeneity of fiber orientation during the molding of GFRP composites, GFRP prepreg was fabricated using roving fiber and polypropylene resin. Analyses on the degree of impregnation, tensile strength, and microstructure were conducted on the fabricated prepregs. A lower pulling speed, higher resin temperature, and longer die length showed a greater degree of impregnation of the prepreg. The scanning electron microscope (SEM) micrograph showed, a homogeneous fiber orientation. As a result, fundamental techniques for improved productivity were suggested for the manufacturing field.

키워드

참고문헌

  1. Kim, H. S., Kim, J. W., Kim, Y. J., Lee, D. G., 2011, Impact of Fiber Projection from GMT-Sheet Moldings on Surface Unevenness, Journal of the Korean Society for Composite Materials 24:6 31-36. https://doi.org/10.7234/kscm.2011.24.6.031
  2. Kim, J. W., Kim, H. S., Kim, T. I., Lee, D. G., Sim, J. K., 2012, Strength and Efficiency during Lap Joining Molding of GMT-sheet, Journal of the Korean Society of Manufacturing Technology Engineers 21:6 1018-1023. https://doi.org/10.7735/ksmte.2012.21.6.1018
  3. Huh, Y. H., Lee, J. H., Kim, D. J., 2012, Effect of Stress Ratio on Fatigue Life of GFRP Composites for WT Blade, J. Mech. Sci. Technol. 26:7 2117-2120. https://doi.org/10.1007/s12206-012-0526-0
  4. Kim, D., Kim, Y. H., Gururaja, S., Ramulu, M., 2010, Processing and Fiber Content Effects on the Machinability of Compression Moulded Random Direction Short GFRP Composites, Int. J. Automot. Technol. 11:6 849-855. https://doi.org/10.1007/s12239-010-0101-6
  5. Han, D. S., Park, I. B., Kim, M. H., Noh, B. J., Kim, W. S., Lee, J. M., 2010, The Effects of Glass Fiber Reinforcement on The Mechanical Behavior of Polyurethane Foam, J. Mech. Sci. Technol. 24:1 263-266. https://doi.org/10.1007/s12206-009-1136-3
  6. Lee, D. G., Sim, J. K., Kim, J. W., 2006, Study on the Fiber Orientation and Fiber Content Ratio Distribution during the Injection Molding for FRP, Transactions of the Korean Society of Machine Tool Engineers 15:4 1-7.
  7. Lee, D. G., Sim, J. K., Kim, J. W., 2005, Fiber Orientation Distribution of Injection Molded Product on the Fiber-Reinforced Polymeric Composites, Transactions of the Korean Society of Machine Tool Engineers 14:1 73-80.
  8. Kim, J. W., Lee, D. G., 2006, Measurement of Fiber Content in Glass Mat Reinforced Thermoplastic Sheet by Image Processing, Key Eng. Mater. 306-308 811-816. https://doi.org/10.4028/www.scientific.net/KEM.306-308.811
  9. Kim, J. W., Lee, D. G., 2007, The Effect of Compression Ratio on the Fiber Orientation during Compression Moling of Short-Fiber Reinforced Composites, Journal of Korea Foundry Society 27:6 258-262.
  10. Roh, J. U., Choi, S. W., Lee, W. I., 2012, Assessment of Impregnation Characteristic of Unidirectional Glass Fiber Reinforced Polylactic acd (PLA), Proceedings of Spring Conference on the Korean Society of Composite Materials 33-34. (Seoul, Korea, May.)
  11. Kalpakjian, S., 1991, Masufacturing Processes for Engineering Materials, Addison-Wesley Pub. Co., Illinois.
  12. Kim, J. W., Lee, D. G., 2011, Creep and tensile properties of press molding joined GMT-Sheets, Trans. Nonferrous Met. Soc. China 21:s1 s170-s174. https://doi.org/10.1016/S1003-6326(11)61083-2
  13. Kim, J. W., Kim, H. S., Lee, D. G., 2011, Study on fibre orientation of weld line parts during injection moulding of fibre reinforced plastic by image processing, Mater. Res. Innov. 15:s1 s303--s306. https://doi.org/10.1179/143307511X12858957674274
  14. Hojo, H., Kim, E. G., Tamakawa, K., 1987, The Fibre Content Distribution of Compression Molded Long Fibre-Reinforced Thermoplastic Products, Int. Polym. Process. 1:2 60-65. https://doi.org/10.3139/217.870060

피인용 문헌

  1. Manufacturing of GFRP Sheet Using Plain Weaving Method vol.38, pp.8, 2014, https://doi.org/10.3795/KSME-A.2014.38.8.849