Journal of Biosystems Engineering

Korean Society for Agricultural Machinery (한국농업기계학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis and Modelling of Vibration Performance for Multi-layered Corrugated Structure

  • Kim, Jin Nyul (Department of Bioindustrial Machinery Engineering, Pusan National University) ;
  • Sim, Jae Min (Department of Bioindustrial Machinery Engineering, Pusan National University) ;
  • Park, Min Jung (Department of Bioindustrial Machinery Engineering, Pusan National University) ;
  • Kim, Ghi Seok (Division of Instrument Development, Korea Basic Science Institute) ;
  • Kim, Jongsoon (Department of Bioindustrial Machinery Engineering, Pusan National University) ;
  • Park, Jong Min (Department of Bioindustrial Machinery Engineering, Pusan National University)
  • Received : 2013.11.04
  • Accepted : 2013.11.26
  • Published : 2013.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: The purpose of this study was to analyze for resonant frequency, vibration transmissibility and damping ratio of multi-layered corrugated structures using a random vibration test. Methods: The random vibration test was performed by the ASTM D4728 specifications using two paperboards (S120, K180) and two types of flutes (A/F, B/F). Damping ratio of the multi-layered corrugated structures was estimated using a theoretical equation derived from the measured resonant frequency and transmissibility. Results: The resonant frequency and vibration transmissibility of the multi-layered corrugated structures of K180 and B-flute were higher than those of S120 and A-flute, respectively; however, the damping ratio of each sample had the opposite tendency. The resonant frequency was inversely proportional to the sample thickness and static stress; vibration transmissibility and damping ratio were not correlated with sample thickness and static stress. In addition, we developed a mathematical model of the resonant frequency with variables of sample thickness and static stress. Conclusions: Results of this study can be useful for environment-friendly and optimal packaging design since vibration has been a key factor in cushioning packaging design.

Keywords

References

  1. ASTM. 2012. ASTM Standards D4728-06: Standard test method for random vibration testing of shipping containers. Annual Book of ASTM Standards, West Conshohocken, PA: ASTM International.
  2. Godshall, W. D. 1971. Frequency response, damping, and transmissibility characteristics of top-loaded corrugated container. FPL:1-12.
  3. Guo, Y. F. and J. H. Zhang. 2004. Shock absorbing characteristics and vibration transmissibility of Honeycomb Paperboard. Shock and Vibration 11:521-531. https://doi.org/10.1155/2004/936804
  4. Guo, Y. F., Y. G. Fu, and W. Zhang. 2008. Creep properties and recoverability of double-wall corrugated paperboard. Experimental Mechanics 48(3):327-333. https://doi.org/10.1007/s11340-007-9097-x
  5. Guo, Y., Xu, W., Fu, Y. and Zhang, W. 2010. Comparison Studies on Dynamic Packaging Properties of Corrugated Paperboard Pads. Engineering, 2(5):378. https://doi.org/10.4236/eng.2010.25049
  6. Guo, Y., Xu, W., Fu, Y. and Wang, H. 2011. Dynamic shock cushioning characteristics and vibration transmissibility of X-PLY corrugated paperboard. Shock and Vibration, 18(4):525-535. https://doi.org/10.1155/2011/578265
  7. MIL-HDBK-304C : Package cushioning design.
  8. Park, J. M. et al. 2011. Characteristics of vibration transmissibility for corrugated paperboard. Journal of the faculty of agriculture, Kyushu Univ. 56(2):327-333.
  9. Piersol, A. G. and T. L. Paez. 2010. Harris' shock vibration handbook (6th Edition). McGraw-Hill.
  10. Rouillard, V. and M. A. Sek. 2007. Behaviour of multilayered corrugated paperboard cushioning systems under impact loads. Strain 43:345-347. https://doi.org/10.1111/j.1475-1305.2007.00395.x
  11. Sek, M. and J. Kirkpatrick. 1997. Prediction of the cushioning properties of corrugated fiberboard from static and quasi-dynamic compression data. Packaging Technology & Science 10(2):87-94. https://doi.org/10.1002/(SICI)1099-1522(199703/04)10:2<87::AID-PTS389>3.0.CO;2-L
  12. Wang, D. M. and Z. W. Wang. 2008. Experimental investigation into the cushioning properties of honeycomb paperboard. Packaging Technology and Science 21(6): 309-316. https://doi.org/10.1002/pts.808

Cited by

  1. Modeling and Analysis of Cushioning Performance for Multi-layered Corrugated Structures vol.41, pp.3, 2016, https://doi.org/10.5307/JBE.2016.41.3.221