한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제23권1호
  • /
  • Pages.15-20
  • /
  • 2014
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

그룹 생산설비에 대한 PLC 기반 감시시스템 개발

Development of Programmable Logic Controller-Based Supervisory System for Group Production Machine

  • Cho, Yongsik (Department of Mechanical and Intelligent Systems Engineering, Pusan National University) ;
  • Ahn, Junghwan (School of Mechanical Engineering, Pusan National University and ERC/NSDM)
  • 투고 : 2013.11.25
  • 심사 : 2014.02.04
  • 발행 : 2014.02.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The manufacturing equipment on most shop floors consists of numerical control machines, and the condition of each piece of equipment is monitored and controlled by an internal sensor or programmable logic controller (PLC). To control and monitor production lines that consist of an equipment or production module, a separate control and monitoring system such as a manufacturing execution system should be introduced. However, there is no standardized system, and it is costly and difficult to build a system for small or medium-sized plants. In this paper, a PLC-based supervisory system for operation control of a group of production machines is proposed, and the developed PLC-based system is evaluated by applying it to a computer numerical control machine.

키워드

참고문헌

  1. MESA, 1997, MES Functionalities & MRP to MES data Flow Possibilities, MESA INTERNATIONAL WHITEPAPER, 2 1-8.
  2. Lee, K. S., Kim, S. H., 2004, Design and Implementation of Mes System in Manufacturing Process, Korea Information Processing Society, Spring Annual, 781-784.
  3. Kim, D. H., 2005, Fault-Cause Detection and Remote Monitoring in PLC Controlled Machine-Tools with an Open Architecture CNC, A Thesis for a Doctorate, Kyungbook University, Republic of Korea.
  4. Lee, S. W., Lee, J. K., Nam, S. J., and Park, J. K., 2005, Application of Data Acquisition System for MES, The Korean Society of Mechanical Engineers, 35:9 1063-1070. https://doi.org/10.3795/KSME-A.2011.35.9.1063
  5. Nam, S. J., Lee, J. K., Lee, S. W. and Park, J. K., 2011, Acquisition of Data of Equipments on Shop Floor using Interface between Various Equipments, The Korean Society of Mechanical Engineers, 35:2 149-156. https://doi.org/10.3795/KSME-A.2011.35.2.149
  6. Park, G. R., Lee, C. S., 2004, A Development of Prototype System for Monitoring and Checking the Safety-Status of NC Machines, Korean Institute of Industrial Engineers, 17:1 13-21.
  7. Jang, S. C., Hong, S. N., 2014, A Study on the Control Characteristics of By FHA by Using PLC, Korean Society of Manufacturing Technology Engineers, 22:2 331-336. https://doi.org/10.7735/ksmte.2013.22.2.331
  8. Sun, B. K., Han, K. R. and Rim, K. Y., 2005, Study on Development of Embedded HMI System for PLC Monitoring, Institute of Electronics Engineers of Korea, 42:7 219-228.
  9. Cho, Y. S., 2013, Integrated Monitoring System Machine and Process Status Information in Awj for MES Application, A Thesis for a degree of Master of Science, Pusan National University, Republic of Korea.
  10. Huh, S. K., Ha, J. C., 1993, Utilization Analysis by Tool Allocation Method of the FMS, Korean Operations Research and Management Science Society, 18:1 19-28.