Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Improvement and Evaluation of Seismic Performance of Reinforced Concrete Exterior Beam-Column Joints using Embedded CFRP Rods and CFRP Sheets

매입형 CFRP Rod와 CFRP시트를 활용한 RC 외부 보-기둥 접합부의 내진성능 평가 및 개선

  • 하기주 (경일대학교 건축학부, 사)건설기술정책연구원) ;
  • 강현욱 (사)건설기술정책연구원)
  • Received : 2014.03.16
  • Accepted : 2014.04.04
  • Published : 2014.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, experimental research was carried out to evaluate and improve the seismic performance of reinforced concrete beam-column joint regions using strengthening materials (embedded CFRP rod and CFRP sheet) in existing reinforced concrete building. Therefore it was constructed and tested six specimens retrofitting the beam-column joint regions using such retrofitting materials. Specimens, designed by retrofitting the beam-column joint regions of existing reinforced concrete building, were showed the stable failure mode and increase of load-carrying capacity due to the effect of crack control at the times of initial loading and confinement of retrofitting materials during testing. Specimens RBCJ-SRC2, designed by the retrofitting of CFRP Rod and CFRP Sheet in reinforecd beam-column joint regions were increased its maximum load carrying capacity by 1.97 times and its energy dissipation capacity by 2.08 times in comparison with standard specimen RBCJ for a displacement ductility of 4 and 7. Also, specimens RBCJ-SRC2 were increased its maximum load carrying capacity by 1.09~1.11 times in comparison with specimen RBCJ-SR series. And Specimens RBCJ-CS, RBCJ-SR series, RBCJ-SRC2 were increased its energy dissipation capacity by 1.10~2.30 times in comparison with standard specimen RBCJ for a displacement ductility of 5, 6.

본 연구에서는 기존 철근콘크리트 건물의 보-기둥 접합부의 내진성능의 개선을 위해 보-기둥 접합부 영역을 FRP보강재(매입형 CFRP Rod, CFRP시트)를 사용하여 보강한 후 내진성능을 평가하였다. 총 6개의 실험체를 제작하고 실험을 수행하여 내진성능을 평가하였으며, 본 연구의 실험결과를 근거로 다음과 같은 결론을 얻었다. 기존 철근콘크리트 보-기둥 접합부의 접합부 영역을 보강한 결과, 초기 재하시 접합부 영역의 균열억제 효과와 재하 전 과정을 통하여 보강재의 구속효과로 인하여 균열억제 효과가 커서 안정적인 파괴형태 및 내력향상 효과를 나타내었다. 매입형 CFRP Rod와 CFRP시트를 활용한 RC 외부 보-기둥 접합부 실험체 RBCJ-SRC2는 표준실험체 RBCJ와 비교하여 변위연성4, 7에서 각각 최대 내력은 1.97배, 에너지소산능력은 2.08배 증가하였다. 또한, 실험체 RBCJ-SR시리즈와 비교하여 최대내력이 1.09~1.11배 증가하였다. 그리고 실험체 RBCJ-CS, RBCJ-SR시리즈, RBCJ-SRC2는 변위연성 5, 6에서 표준실험체 RBCJ 보다 에너지소산능력이 1.10~2.30배 증가하였다. 그리고 에너지소산능력은 변위연성 4에서 13.0~14.4% 증가하였다.

Keywords

References

  1. Abdel-Fattah, B., and Wight, K. (1987), Study of Moving Beam Plastic Hinging Zones for Earthquake Resistant Design of R/C Buildings, ACI Journal, Proceedings, 89(84-S4), 31-39.
  2. ACI 318-11 (2011), Building Code Requirements for Structural Concrete) and Commentary (ACI 318-11), American Concrete Institute, Farmington Hills Michigan.
  3. ACI-ASCE Committee 352, Recommendations for Design of Beam-Column Joints in Monolithic Reinforced Concrete Structures, ACI Journal, Proceedings, 82(3), 266-283.
  4. Cho, C. G., and Park, M. H. (2002), Finite Element Prediction of the Influence of Confinement on RC Beam-Columns under Single or Double Curvature Bendings, Engineering Structures, 25(12), 1525-1536.
  5. Ha, G. J., Kim, J. K., and Chung, L., (1992), Response of Reinforced High-Strength Concrete Beam-Column Joints Under Load Reversals, Magazine of Concrete Research, 160, 175-184.
  6. Ha, G. J., Kim, J. K., Chung, L., (1992), Improvement of Earthquake-Resistant Performance of R/C Beam-Column Joint Constructed with High-Strength Concrete Subjected to Cyclic Loading, Journal of the Korea Concrete Institute, 4(1), 135-145.
  7. Ha, G. J., Shin, J. H., Kang, H. W., (2011), Improvement and Evaluation of Seismic Performance for Reinforced Concrete Beam-Column Joints Using High Performance Embedded FRP, Journal of the Korea Concrete Institute, 23(3), 385-392. https://doi.org/10.4334/JKCI.2011.23.3.385
  8. Ha, G. J., Yang, J. K., Kim, J. K., Chung, L., (1992), Hysteretic Behavior of Reinforced High-strength Concrete Beam-Column Joint Under Load Reversals, Journal of the Architectural Institute of Korea Structure & Construction, 8(9), 231-240.
  9. Park, Y, K., (2007), A Study on the Evaluation of Availability Adhesive Strengthening Method Using Carbon Fiber, Theses for Master's Degree, Cheongju University.
  10. Ryu, D. W., (2008), Flexural and Shear Design of RC Members Strengthened by FRP Jacket, Theses for Master's Degree, Kyungpook National University.