Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Failure Behavior of Octagonal Flared RC Columns Using Oblong Hoops

장방형 띠철근을 이용한 팔각형 플레어 RC 기둥의 파괴거동

  • 고성현 (제주국제대학교 토목공학과)
  • Received : 2013.07.30
  • Accepted : 2013.12.02
  • Published : 2014.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

Transverse steel bars are used in the plastic hinge zone of columns to insure adequate confinement, prevention of longitudinal bar buckling and ductile behavior. Fabrication and placement of rectangular hoops and cross-ties in columns are difficult to construct and require larger amount of transverse steels. In this paper, to solve these problems, the new lateral confinement method using oblong hoop is proposed for the transverse confinement of columns of the oblong cross-section and flared column. The experimental study for octagonal oblong cross-section was carried out by the flared columns test in strong axis. The lateral confinement method using proposed oblong hoop detail showed satisfactory performance of lateral confinement. Therefore it can be the alternative for oblong cross-section and flared column with improved workability and cost-efficiency.

횡방향철근은 기둥의 소성힌지구간에 충분한 구속효과, 축방향철근의 좌굴방지와 연성거동을 확보하기 위해 적용된다. 기둥에서 사각형 후프 띠철근과 보강 띠철근의 조립 및 배근방법은 시공이 까다롭고 많은 횡방향철근량이 요구된다. 본 논문에서, 이러한 문제점들을 해결하기 위하여 장방형 단면과 플레어 기둥의 횡구속을 위한 장방형 후프 띠철근을 사용한 새로운 횡구속 방법이 제안되었다. 팔각 장방형 단면에 대한 실험적 연구는 플레어 기둥의 강축에 대해 수행되었다. 장방형 띠철근을 적용한 횡구속 방법은 만족할 만한 횡구속 성능을 나타내었다. 개발된 장방형 후프 띠철근 상세는 장방형 단면과 플레어 기둥의 시공성과 경제성을 향상시켜줄 수 있는 하나의 대안으로서 적용 가능한 것으로 판단된다.

Keywords

References

  1. CALTRANS (2002), Caltrans Seismic Design Criteria, Version 1.3, California Department of Transportation, Sacramento, USA, December, 2002.
  2. CALTRANS (2003), Seismic Performance of RC Bridge Frames with Architectural Flared Columns, Report No. CCEER 03-03, California Department of Transportation, Sacramento, USA, December, 27-73.
  3. Ko, S. H. (2012), Seismic Performance of Square RC Column Confined with Spirals, Journal of Korea Institute for Structural Maintenance Inspection, KSMI, 16(5), 88-97 (in Korean). https://doi.org/10.11112/jksmi.2012.16.5.088
  4. Ko, S. H. (2013), Displacement Ductility of Circular RC Column according to the Spacing of Spirals, Journal of Korea Institute for Structural Maintenance Inspection, KSMI, 17(2), 71-82 (in Korean). https://doi.org/10.11112/jksmi.2013.17.2.071
  5. Ko, S. H. (2013), Seismic Performance and Flexural overstrength of Circular RC Column, Journal of Korea Institute for Structural Maintenance Inspection, KSMI, 17(5), 49-58 (in Korean). https://doi.org/10.11112/jksmi.2013.17.5.049
  6. Ko, S. H., Lee, J. H. (2010), Low Cycle Fatigue Model for Longitudinal Reinforcement, Journal of the Korea Concrete Institute, 22(2), 273-282 (in Korean). https://doi.org/10.4334/JKCI.2010.22.2.273
  7. Lee, J. H., Ko, S. H. (2010), Low Cycle Fatigue Behavior for Longitudinal Reinforcement, Journal of the Korea Concrete Institute, 22(2), 263-271 (in Korean). https://doi.org/10.4334/JKCI.2010.22.2.263
  8. Michael, P. B., and Marc, O. E. (2005), Practical Performance Model for Bar Buckling, Journal of structural engineering, ASCE, 131(7), 1060-1070. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:7(1060)
  9. Ministry of land, transport and maritime affairs (2012), Concrete Structure Design Standard, Korea (in Korean).
  10. Ministry of land, transport and maritime affairs (2012), Korea Bridge Design Specifications (Limited state design), Korea (in Korean).
  11. Nada, H., Sanders, D., Saiidi, S. M. (2003), Seismic Performance of RC Bridge Frames with Architectural Flared Columns, Report No. CCEER 03-03, California Department of Transportation, Sacramento, USA, December, 27-73.
  12. Shu, J. W., Rhee, J. Y., Ko, S. H., Lee, J. H. (2004), A Study on the Core Confinement Method of Reinforced Concrete Piers, Journal of Korea Society of Civil Engineering, KSCE, 24(5A), 923-930 (in Korean).

Cited by

  1. 축방향철근비 2.017%인 중공 원형 RC 기둥의 내진성능과 휨 초과강도 vol.21, pp.1, 2014, https://doi.org/10.11112/jksmi.2016.21.1.001