References
- Feng-Li Lian, James Moyne, and Dawn Tilbury, "Network Design Consideration for Distributed Control Systems," IEEE Trans. Control sys. Tech., vol.10, No.2, pp.297-307, Mar. 2002. https://doi.org/10.1109/87.987076
- J. H. Jung, J. H. Lee, T. D. Park, and K. H. Park, "Development of a Network-Based Distributed Control System," CASS 2008 , pp.777-782, 2008.
- Robin Qiu and Phillip Laplante, "Design and Development of Component-based Equipment Connectivity for Semiconductor Manufacturing," The 4th. Int. Confr. on Control and Automation (ICCA'03), Montreal, Canada, June, 2003.
- D. Y. Kim and W. Barn, "Development of a Semi-Conductor Communication Protocal and Spooling System," The Annual Conference of the Korean Society of Semiconductor & Display Technology, Autumn, 2006.
- J. K. Cho, H. R. Park, and J. You, "Implementation of SECS/GEM Communication Protocol for Wafer Aligner," Conference of IEEK, Summer, Vol.26, No.1, 2003.
- H. J. Kim, J. W. Kim, and K. W. Lee, "Flight control of a small unmanned aerial vehicle using a dynamic compensator," The journal of Korea Navigation Institute, Vol.16, No.4, 2012. https://doi.org/10.12673/jkoni.2012.16.4.571
- B. K. Kim, and W. K. Chung, "Design of Robust Motion Controllers with Internal-Loop Compensator," The J. of KSME, Vol.25, No.10, 2001.
- H. J. Yeo, "Design of a Robust Controller Using Disturbance Rejection Controller," The J. of KAIS, Vol.7, No.2, 2006.
- Asok Ray, "Introduction to Networking for Integrated Control Systems," IEEE Control Sys. Mag., vol.9, pp.76-79, Jan. 1989. https://doi.org/10.1109/37.16755
- Linda. G. Bushnell, "Networks and Control," IEEE Control Sys. Mag., vol.21, no.1, pp.22-23, Feb.2001. https://doi.org/10.1109/MCS.2001.898789
- Feng-Li Lian, James Moyne, and Dawn Tilbury, "Network Design Consideration for Distributed Control Systems," IEEE Trans. Control Sys. Tech., vol.10, No.2, pp.297-307, Mar. 2002. https://doi.org/10.1109/87.987076
- J. H. Jung, S. Y. Choi, and K. H. Park, "A Study on the Power System Control and Monitoring Technique Using CAN," The Transactions of the Korean Institute of Electrical Engineers, Vol.52D, No.5. pp.268-276, May 2003.
- BOSCH, CAN Specification, Part A,B 1991.
- Ken Tindell, Alan Burns, "Guaranteed Message Latencies for Distributed Safety-Critical Hard Real Time Control Network," report YCS229, Department of Computer Science, University of York, May 1994.
- J. Yun, S. Nam, K. W. Kim, and S. Lee, "Evaluation of Network Protocols for Automotive Data Communication", J. of Control Automation and Systems Engineering, vol.3, no.6, pp.632-638, Dec. 1997.
- Feng-Li Lian, James R. Moyne, and Dawn M. Tilbury, "Performance Evaluation of Control Networks: Ethernet, ControlNet, and DeviceNet," IEEE Control Sys. Mag., vol.21, no.1, pp.66-83, Feb.2001.
- K. Y. Yi, "An Implementation of The Position Controller for Multiple Motors Using CAN," The Transactions of the Korean Institute of Electrical Engineers, Vol.51D, No.2. pp.55-60, Feb. 2002.
- J. Rufino, P. Verissimo, "A Study on the Inaccessibility Characteristics of the CAN," 2nd International CAN Conference, 1995.
- G. H. Choi, A Study on the Position Control of Arago's Disk Systems, Master Thesis, SungKyunKwan Univ., 1994.
- W. M. Lee, Control of arago's disk system using CAN(Controller Area Network), Master Thesis, SungKyunKwan Univ., 2002.