DOI QR코드

DOI QR Code

Fresh and hardened properties of concrete containing cold bonded aggregates

  • Thomas, Job (Cochin University of Science and Technology) ;
  • B., Harilal (Cochin University of Science and Technology)
  • 투고 : 2013.10.30
  • 심사 : 2014.05.09
  • 발행 : 2014.06.25

초록

The properties of fresh and hardened concrete made using three types of artificial cold bonded aggregates are determined. The properties, namely, slump, water absorption, compressive strength and splitting tensile strength of concrete containing artificial aggregate are reported. The variables considered are aggregate type and water-to-cement ratio. Three types of cold bonded aggregates are prepared using fly ash and quarry dust. The water-to-cement ratio of 0.35, 0.45, 0.55 and 0.65 is used. The test result indicates that artificial aggregates can be recommended for making the concrete up to a strength grade of 38 MPa. The use of quarry dust in the production of artificial aggregate mitigates environmental concerns on disposal problems of the dust. Hence, the alternate material proposed in this study is a green technology in concrete production.

키워드

참고문헌

  1. ASTM C 642-06 (2006), Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, American Society for Testing and Materials, USA.
  2. BS 812-110 (1990), Testing Aggregate Methods for Determination of Aggregate Crushing Value, British Standards Institution, UK.
  3. Bui, L.A., Hwang, C.L., Chen, C., Lin, K. and Hsieh, M. (2012), "Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete", Const. Build. Mat., 35, 1056-1062. https://doi.org/10.1016/j.conbuildmat.2012.04.032
  4. Chi, J.A.M., Huang, R., Yang, C.C. and Chang, J.J. (2003), "Effect of aggregate properties on the strength and stiffness of lightweight concrete", Cement Concrete Compos., 25(2), 197-205. https://doi.org/10.1016/S0958-9465(02)00020-3
  5. Emerson, M. (1999), "Mechanism of water absorption by concrete", Proceeding of international Conference of protection of concrete (Ed. by Dhir, R. and Green, J.), Dundee, 624-634.
  6. Gesoglu, M., Guneyisi, E. and Oz, H.O. (2012b), "Properties of light weight aggregate produced with cold -bonding pellatization of fly ash and ground granulated blast furnace slag", Mat. Struct., 45, 1535-1546. https://doi.org/10.1617/s11527-012-9855-9
  7. Gesoglu, M., Guneyisi, E. , Mahmood, S.W. and Oz, H.O. (2012), "Recycling ground granulated blast furnace slag as cold bonded artificial aggregate partially used in self-compacting concrete", J. Hazardous Mat., 235-236, 352-358. https://doi.org/10.1016/j.jhazmat.2012.08.013
  8. Gesoglu, M., Ozturan, T. and Gooneys, E. (2004), "Shrinkage cracking of light weight concrete made with cold -bonded fly ash aggregate", Cement Concrete Res., 34(7), 1121-1130 https://doi.org/10.1016/j.cemconres.2003.11.024
  9. Ghafoori, N. and Diawara, H. (2010), "Evaluation of fresh properties of self-consolidating concrete under long transportation time and extreme temperature", Proceeding of SCC 2010, Design, Production and Placement of Self-consolidation concrete (Ed. by Khayat, K.H. and Feys, D.), Canada, 139-152.
  10. IS:10262 (2009), Concrete Mix Proportioning -Guidelines, Bureau of Indian Standards, New Delhi, India.
  11. IS:1199 (1950), Method of Sampling and Analysis of Concrete, Bureau of Indian Standards, New Delhi, India.
  12. IS:2316 (1997), Methods of Test for Aggregate for Concrete, Bureau of Indian Standards, New Delhi, India.
  13. IS:383(1970), Specification for Coarse and Fine Aggregates from Natural Sources for Concrete - Code of Practice, Bureau of Indian Standards, New Delhi, India.
  14. IS:516 (1959), Methods of test for strength of concrete- Code of Practice, Bureau of Indian Standards, New Delhi, India.
  15. IS:5816 (1999), Splitting tensile strength of concrete - Method of Test-Code of Practice, Bureau of Indian Standards, New Delhi, India.
  16. IS:8112 (1989), 43 Grade Ordinary Portland Cement - Specification, Bureau of Indian Standards, New Delhi, India.
  17. Jo, B.W., Park, S.K. and Park, J.B. (2007), "Properties of concrete made with alkali activated fly Ash lightweight aggregate", Cement Concrete Compos., 29(2), 33-38.
  18. Joseph, G. and Ramamurthy, K. (2008), "Effect of cold bonded aggregate on workability and mechanical properties of concrete", Inst. Eng. J. (India), 89, 33-38.
  19. Joseph, G. and Ramamurthy, K. (2009), "Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete", Const. Build. Mat., 23(5), 1862-1870. https://doi.org/10.1016/j.conbuildmat.2008.09.018
  20. Joseph, G. and Ramamurthy, K. (2011), "Autogenous curing of cold-bonded fly-ash -aggregate concrete", J. Mat. Civil Eng., 23, 393-401. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000177
  21. Malarics, V. and Muller, H.S. (2010), "Evaluation of the splitting tension test for concrete from a fracture mechanical point of view", Proceedings of FraMCoS-7, 709-716.
  22. Nguyen, H.T. (2011), "Water and heat transfer in cement based materials", Ph.D. Dissertation, University of Tromso, Norway.
  23. Parrott, L.J. (1992), "Water absorption in cover concrete", Mater. Struct., 25, 284-292. https://doi.org/10.1007/BF02472669
  24. Poon, C.S., Kou, S.C. and Lam, L. (2007), "Influence of recycled aggregate on slump and bleeding of fresh concrete", Mater. Struct., 40, 981-988. https://doi.org/10.1617/s11527-006-9192-y
  25. Priyadharshiny, P., Ganesh, G.M. and Santhi, A.S. (2011), "Experimental study on cold bonded fly ash aggregates", Int. J. Civil Struct. Eng., 2(2), 493-501.
  26. Yu, C.C., Tung, S.H. and Weng, M.C. (2008), "The failure mechanism of a concrete cube", Proceeding of the Sixth International Conference on Engineering Composit Tech. (Ed. by Papadrakakis, M. and Topping, B.H.V.), Paper ID 131.

피인용 문헌

  1. Mechanical properties of cold bonded quarry dust aggregate concrete subjected to elevated temperature vol.125, 2016, https://doi.org/10.1016/j.conbuildmat.2016.08.093
  2. Investigation of fresh concrete behavior under vibration using mass-spring model vol.57, pp.3, 2016, https://doi.org/10.12989/sem.2016.57.3.425
  3. Performance of bricks and brick masonry prism made using coal fly ash and coal bottom ash vol.4, pp.4, 2016, https://doi.org/10.12989/acc.2016.4.4.231
  4. Prediction of behavior of fresh concrete exposed to vibration using artificial neural networks and regression model vol.60, pp.4, 2016, https://doi.org/10.12989/sem.2016.60.4.655
  5. Properties of concrete incorporating sand and cement with waste marble powder vol.4, pp.2, 2014, https://doi.org/10.12989/acc.2016.4.2.145
  6. Effect of different binders on cold-bonded artificial lightweight aggregate properties vol.9, pp.2, 2020, https://doi.org/10.12989/acc.2020.9.2.183
  7. Displacement prediction of precast concrete under vibration using artificial neural networks vol.74, pp.4, 2014, https://doi.org/10.12989/sem.2020.74.4.559