Abstract
Available shafts with gears at each end of the cylinder-shaped steel are widely used as power train components for automobiles. In order to automate the production of a geared shaft, there are problems to be solved. After one side of the cylinder is cut in gears, one of the problems is to determine the position of the cylinder which has been already cut. The shaft is then to be fed ahead with geared position to the chuck with jaws in geared shape. The other problem is to acquire information on an angular position of the shaft to fit to the jaws of the chuck. This paper deals with the magnetic detection sensor of gear position. Coils are installed in two places. Self-inductances of coils are detected by the changes of reluctance and are then compared. The magnetic analysis also has been carried out by the finite element analysis (FEM).
실린더형 강재의 양 끝에 기어를 갖는 기어 축은 자동차 동력전달 장치의 부품으로 널리 사용되고 있다. 기어 축을 가공하는 순서는 먼저 실린더 모양 강재의 한 쪽을 공작기계의 척에 물리고 다른 쪽을 기어로 가공한 다음, 기어로 가공된 쪽을 기어 모양 척에 끼워 물리고 가공되지 않은 쪽을 가공하는 순서로 진행된다. 이 공정이 자동화되기 위해서는 한 쪽에 기어를 가공한 상태에서 다른 쪽을 가공하려 할 때 가공된 쪽과 가공되지 않은 쪽 판별과 기어 모양 척에 정확히 기어로 가공된 강재를 끼우는 작업의 자동화가 선행되어야 한다. 이에 본 연구에서는 기어 축에서 기어의 위치와 기어의 각도를 검지하기 위하여 자속의 검출을 활용하는 자기 검출 센서를 제안하였고 제안된 센서의 설계를 위해 자기장 해석을 유한요소방법(FEM)으로 수행하였다.