Journal of the Korean Society of Industry Convergence (한국산업융합학회 논문집)

The Korean Society of Industry Convergence (한국산업융합학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Design of Flexible Gripper for Unmanned FA

무인 FA를 위한 플렉시블 그리퍼 설계에 관한 연구

  • Received : 2015.06.25
  • Accepted : 2015.07.27
  • Published : 2015.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we propose a new approach to design and control a smart gripper of robot system. A control method for flexible grasping a object in partially unknown environment was proposed, where a proximate sensor detecting the distance between the fingertip and object was used. Based on the proximate sensor signal the finger motion controller could plan the grasping process divided in three phases. The first step is scanning process which two first joints were moved to mid-position of the detected range by a state-variable feedback position controller, after the scanning was finished. The contact force of fingertip was then controlled using the detection sensor of the servo controller for finger joint control. The proposed grasping planning was tested on rectangular bar.

Keywords

References

  1. Rajko Tomovic, George A. Bekey and Walter J. Karplus, "A Strategy for Grasp Synthesis with Multifingered Robot Hands," Proc. IEEE Int. Conf. on Robotics and Automation, pp. 83-89, 1987.
  2. Jeffrey kerr and Bernad Roth, "Special Grasping Configurations with Dexterous Hands," Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1361-1367, 1986.
  3. Li-Ren Lin and Han-Pang Huang, "Mechanism Design of a New Multifingered Robot hand," Proc. Int. IEEE Conf. on Robotics and Automation, pp. 1471-1476, 1996.
  4. 심병균, 정양근, 박인만, 황원준, 강언욱, 한성현, "로봇 핸드핑거의 파지제어에 관한 연구," 한국산업응용학회 저널논문, Vol. 16, No. 4, pp. 141-145. 2013.
  5. D. J. Balek and R. B. Kelley, "Using Gripper Mounted Infrared Proximity Sensors for Robot Feednack Control," Proc, Int. IEEE Conf. on Robotics and Automation, pp. 282-287, 1985.
  6. S. C. Jacobsen, E. K. Iversen, D. F. knutti, R. T. Johnson and K. B. Biggers, "Design of the UTAH/M.I.T Dextrous Hand," Proc. Int IEEE Conf. on Robotics and Automation, pp. 1520-1532. 1986.
  7. B. Espiau and J. Y. Catros, "Use of Optical Reflectance Sensors in Robotics Applications," IEEE Transactions on System, Man and Cybernetics, Vol, SMC-10, No. 12, pp. 903-912, 1980.
  8. Edward C. and Vladimir L. "Motion Planning for Rbot Arm Manipulator with Proximity Sensing," Proc. Int. IEEE Conf. on Robotics and Automation, pp. 740-745, 1988.
  9. Robert, D. H, Nicolas, P., Prasand, A., Imin, K. and Mark, R. C., "Grasping MAnipulation and Control with Tactile Sensing," Proc. Int. IEEE Conf. on Robotics and Automation, pp. 1258-1263, 1990.