Journal of the Computational Structural Engineering Institute of Korea (한국전산구조공학회논문집)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis Model for Approximate Evaluation of Stiffness for Semi-Rigid Connection of Wooden Structures

목조 구조물 접합부의 강성에 대한 근사평가를 위한 해석모델

  • Received : 2014.11.20
  • Accepted : 2014.11.26
  • Published : 2015.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Modern wooden structures usually are connected with steel fastener type connectors. And joints using multiple connectors in wooden structures will form semi-rigid connection. If connection in wooden structure would be designed to be pinned joint, the underestimate for loads transmitted through connection, would result in the deficient capacity of resistance in connection. And if joints in wooden structures would be assumed to be fully-rigid joint, amount of fasteners needed at the connection could be excessively increased. It will give a bad effect in the view of beauty, constructability and economy. Estimate for the reasonable stiffness of connection might be essential in design of reasonable connection in wooden structure. This paper will suggest analysis modelling technique that can represent approximate stiffness of connections using a common analysis program for double shear connection in order to give help in performing easily the design of wooden structure. It is verified that the suggested approximate analysis modelling technique could represent the behavior in connection by comparing the analysis results with test results for tensile, bending moment.

현대 목조 구조물은 일반적으로 접합철물인 연결재를 이용하여 접합된다. 그리고 목조 구조물에서 다수의 연결재를 사용한 접합부는 반강접 접합부를 만든다. 목조 구조물에 접합부가 핀접합으로 설계될 경우에 접합부를 통해 전달되는 하중이 과소 평가되고 이것은 접합부의 저항능력 부족을 초래한다. 목조 구조물의 접합부를 완전 강접합으로 고려할 경우에 접합에 필요한 접합철물의 양이 과도하게 증가 할 수 있다. 이것은 미적인 요소 뿐만 아니라 시공성과 경제성을 저하시킨다. 접합부의 합리적인 강성에 대한 추정은 목조 구조물의 합리적인 접합부의 설계에 필수적인 요소이다. 이 논문은 목조 구조물의 구조설계를 쉽게 수행할 수 있도록 도움을 주기 위하여 2면 전단접합에 대하여 구조설계에서 널리 이용되는 상용 프로그램을 사용하여 접합부의 근사적인 강성을 나타낼 수 있는 해석 모델링 기법을 제안한다. 제안된 근사해석 모델링 기법은 휨 모멘트, 인장에 대한 실험 결과와 해석결과를 비교하여 접합부의 거동을 나타낼 수 있다는 것을 확인하였다.

Keywords

References

  1. Awaludin, A. (2005) Moment Resistance Analysis on Various Configuration of Multiple-Bolt Timber Connection using Beam on Elastic Foundation Theory and Rigid Plate Assumption, 13, Media Komunikasi Teknik Sipil, pp.57-62.
  2. Awaludin, A. (2005) Safety Factor of Timber Bolted-Connection Designed with SNI-5(2002), J. Teknik Sipil, 12, pp.87-92.
  3. Awaludin, A., Smittakorn, W., Hayashikawa. T., Hirai, T. (2007) M-${\theta}$ Curve of Timber Connection with Various Bolt Arrangements Under Monotonic Loading, J. Struct. Eng., 53A, pp.853-862.
  4. Eratodi, I.B., Triwiyono, A., Awaludin, A., Prayitno, D.T. (2013) Perilaku Kekanik Sambungan Struktur Bambu Laminasi Menggunakan Pelat dan Paut, Konferensi Nasional Teknik Sipil, 7, pp.91-98.
  5. Gattesco, N., Toffolo, I. (2004) Experimental Study on Multiple-Bolt Steel-to-Timber Tension Joints, Mater. & Struct., 37, pp.129-138. https://doi.org/10.1007/BF02486609
  6. Hwang, K., Homatsu, K. (2002) Bearing Properties of Engineered Wood Products I: Effects of Dowel Diameter and Loading Direction, J. Wood Sci., 48, pp.295-301. https://doi.org/10.1007/BF00831350
  7. Lee, D.G. Cho, S.H. Park, C.H. (2004) The Analytical Model Considering the Deformation of Panel Zone with Linear Element, Conf. Proc. Korea Comput. Struct. Eng., 17, pp.293-300.
  8. Schneider, S.P., Amidi, A. (1998) Seismic Behavior of Steel Frames with Deformable Panel Zones, J. Struct. Eng., 124, pp.35-42. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:1(35)
  9. Shim, N.H., Kim, D.K., Park, Y.S. (2012) An Experimental Study for Structural Performance Evaluation of Timber Truss Bridge, Journal of Korean Society of Civil Engineers, 60, pp.56-66.
  10. Smith, I., Asiz, A., Snow, M. (2006) Design Method for Connections in Engineered Wood Structures, Faculty of Forestry and Environmental Management University of New Brunswick, Fredericton, pp.58-66.
  11. Tsai, K.C., Popov, E.P. (1990) Seismic Panel Zone Design Effect on Elastic Story Drift in Steel Frames, J. Struct. Eng., 116, pp.3285-3301. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:12(3285)