한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제32권12호
  • /
  • Pages.1011-1016
  • /
  • 2015
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

롤투롤 시스템에서 감김롤 내부 잔류응력 최소화를 위한 테이퍼 장력 설정 기법

Taper Tension Logic for Optimization of Residual Stresses in Roll-to-Roll Winding Systems

  • Lee, Jongsu (Department of Mechanical Design and Production Engineering, Konkuk University) ;
  • Lee, Changwoo (School of Mechanical Engineering, Changwon National University)
  • 투고 : 2015.10.14
  • 심사 : 2015.11.05
  • 발행 : 2015.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In a roll-to-roll continuous system, winding is one of the most important processes since it determines the quality of the final manufactured products such as flexible film and printed electronic devices. Since an adequate winding tension can reduce the incidence of the defects that are derived from the inner stress of the wound roll such as starring and telescoping, it is necessary to determine the optimal taper-tension profile. In this study, an algorithm for the setting of an optimal taper-tension profile in consideration of the residual stress in the wound roll is suggested; furthermore, the algorithm was adjusted for the determination of an optimal taper-tension profile regarding the winding process of $10{\mu}m$ polypropylene (PP) film. As a result of the algorithm-generated, optimal taper-tension profile, the residual stress and radial stress in a PP wound roll were decreased to 27.37 % and 40.05 % (mean value), respectively.

키워드

참고문헌

  1. Kim, S. H., Hong, K., Xie, W., Lee, K. H., Zhang, S., et al., "Electrolyte‐Gated Transistors for Organic and Printed Electronics," Advanced Materials, Vol. 25, No. 13, pp. 1822-1846, 2013. https://doi.org/10.1002/adma.201202790
  2. Lee, C., Kang, H., and Shin, K., "Advanced Taper Tension Method for the Performance Improvement of a Roll-to-Roll Printing Production Line with a Winding Process," International Journal of Mechanical Sciences, Vol. 59, No. 1, pp. 61-72, 2012. https://doi.org/10.1016/j.ijmecsci.2012.03.005
  3. Lee, J., Shin, K., and Lee, C., "Analysis of Dynamic Thermal Characteristic of Register of Roll-to-Roll Multi-Layer Printing Systems," Robotics and Computer-Integrated Manufacturing, Vol. 35, pp. 77-83, 2015. https://doi.org/10.1016/j.rcim.2015.02.008
  4. Knittel, D., Laroche, E., Gigan, D., and Koc, H., "Tension Control for Winding Systems with Two- Degrees-of-Freedom $H{\infty}$ Controllers," IEEE Transactions on Industry Applications, Vol. 39, No. 1, pp. 113-120, 2003. https://doi.org/10.1109/TIA.2002.807231
  5. Lee, C., "A Study on the Taper Tension Control Considering Lateral Motion of a Moving Web in Roll to Roll Systems," Ph.D. Thesis, Mechanical Design and Production Engineering, Konkuk University, 2008.
  6. Altmann, H. C., "Formulas for Computing the Stresses in Center-Wound Rolls," Tappi Journal, Vol. 51, No. 4, pp. 176-179, 1968.
  7. Good, J. K., Pfeiffer, J. D., and Giachetto, R. M., "Losses in Wound-on-Tension in the Center Winding of Wound Rolls," Proc. of the Web Handling Symposium on ASME Applied Mechanics Division, Vol. 149, pp. 1-12, 1992.
  8. Burns, S. J., Meehnan, R. R., and Lambropoulos, J. C., "Strain-Based Formulas for Stresses in Profiled Center-Wound Rolls," Tappi Jorunal, Vol. 82, No. 7, pp. 159-167, 1999.
  9. Wan, F., Wang, Y. Q., Yan, X. C., and Cui, Y. G., "Correlation between Mandrel and Pinch Roll of Down-Coiler," Journal of Iron and Steel Research, Vol. 9, 2007.
  10. Lee, C., "Effect of Taper Tension Profiles on Radial Stress of a Wound Roll in Roll-to-roll Winding Process," J. Korean Soc. Precis. Eng., Vol. 31, No. 2, pp. 125-131, 2014. https://doi.org/10.7736/KSPE.2014.31.2.125