The Journal of Korea Institute of Information, Electronics, and Communication Technology (한국정보전자통신기술학회논문지)

Korea Information Electronic Communication Technology (한국정보전자통신기술학회)
권호 표지
DOI QR코드

DOI QR Code

Power Signal Monitering System with Compression Storage and Reconstruction

압축 저장 및 복원기능을 가지는 전력신호 모니터링 시스템

  • Bae, Hyeon-Deok (School of Electrical Engineering, Chungbuk National University)
  • Received : 2016.04.11
  • Accepted : 2016.04.26
  • Published : 2016.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

In recent year, the interests of PQ is increase due to the increasing of non-linear load and distributed power sources in power system. For the parameters detection and feature extraction of PQ, and the PQ improvement method, continuous power signal monitering is needed. In this paper, the power signal compression and reconstruction method is suggested for power signal monitering. The power signal is compressed using DCT that has good compression performance, and the compressed signal is reconstructed through IDCT. And for the higher compression rate, DCT coefficients are arranged by magnitude in compression process, and in recouction process DCT coefficients are rearranged to original frequency position. The synthesized signal according to the IEC standard is used used in compression and reconstruction simulations. The performances of the proposed method are verified by comparing the error between synthesized signal and reconstructed signal.

최근 들어 전력계통에서 비선형 부하의 증가와 분산전원의 증가로 전력 품질에 관한 관심이 증대 되고 있다. 전력신호로 부터 전력품질관련 파라미터 검출과 특징추출 그리고 이를 이용한 품질 개선 방안 마련을 위해 전력신호의 지속적인 모니터링이 필요하다. 본 논문에서는 전력신호의 모니터링을 위한 전력신호의 압축 저장과 저장된 신호의 복원이 가능한 방법을 제시한다. 전력신호 압축은 에너지 압축 성능이 우수한 DCT를 이용하며 압축된 신호의 복원에는 IDCT 과정을 거친다. 그리고 신호의 압축률을 높이기 위해 DCT계수를 크기에 따라 정렬하며 복원에서는 DCT계수를 원위치로 재배열하는 기법을 사용한다. IEC표준에서 규정한 고조파 크기에 의해 합성한 신호를 이용하여 압축과정을 거처 복원된 신호와 원 신호와의 오차를 비교함으로서 신호제안기법의 성능을 평가한다.

Keywords

References

  1. Math H.J.Bollen and Irene Y.H.Gu, Signal Processing of Power Quality Disturbances, Piscataway, NJ, IEEE Press, 2006.
  2. Math H.J.Bollen, Irene Y.H.Gu, S.Santoso etc, "Bridging the Gap between Signal and Power," IEEE Signal Processing Mag., vol. 26, no., 4 pp.12-31, Jul. 2009.
  3. S.Santoso, Fundamental of Electric Power Quality, Summer 2010 ed., Surya Santoso, 2010.
  4. Tomas Radil, P.M.Ramos, F.M.Janeiro and A.Cruz Serra,"PQ Monitering System for Real-Time Detection and Classification of Disturbances in Single-Phase Power System," Pro. of IEEE Instrumentation and Measurement Technology Conferences, pp.1-4, Warsaw Poland, May 2007.
  5. H.H.Chang, K-L Lian, Y-C Su, and Wei-Jen Lee,"Power-Spectrum-Based Wavelet Transform for Nonintrusive Demand Monitering and Load Identification," IEEE Trans. on Industrial Applications, vol.50, no.3, pp.2081-2089, Mar. 2014. https://doi.org/10.1109/TIA.2013.2283318
  6. M.A.S.Masoum, S.Jamali and N.Ghaffarzadeh, "Detection and Classification of Power Quality Disturbances using Discrete Wavelet Transform and Wavelet Network," IET Sci. Meas. Technol. vol.4, iss.4, pp.193-205, Apr.2010. https://doi.org/10.1049/iet-smt.2009.0006
  7. International Standard IEC 61000-3-6
  8. A.V.Oppenheim and R.W.Shafer, Discrete-Time Signal Processing, 3rd ed., Upper Saddle River, NJ, Person 2010.
  9. K.R.Rao, Discrete Cosine Transform, San Diego, CA, Academic Press, 1990.
  10. S.W.Sohn, Y.B.Lim, J.Y.Yun, H.Choi and H.D.Bae,"A Filter Bank and a Self-Tuning Adaptive Filter for the Harmonic and Interharmonic Estimation in Power Signals," IEEE Transsaction on Instrumentation and Measurement, vol.61, no.1, pp.64-73, Jan. 2012. https://doi.org/10.1109/TIM.2011.2150610
  11. Submitted Korean Patent, No. 10-2014-0193976.