DOI QR코드

DOI QR Code

A Time-Domain Method to Generate Artificial Time History from a Given Reference Response Spectrum

  • Shin, Gangsig (Korea Institute of Nuclear Safety) ;
  • Song, Ohseop (Department of Mechanical Engineering, Chungnam National University)
  • Received : 2015.10.14
  • Accepted : 2016.01.25
  • Published : 2016.06.25

Abstract

Seismic qualification by test is widely used as a way to show the integrity and functionality of equipment that is related to the overall safety of nuclear power plants. Another means of seismic qualification is by direct integration analysis. Both approaches require a series of time histories as an input. However, in most cases, the possibility of using real earthquake data is limited. Thus, artificial time histories are widely used instead. In many cases, however, response spectra are given. Thus, most of the artificial time histories are generated from the given response spectra. Obtaining the response spectrum from a given time history is straightforward. However, the procedure for generating artificial time histories from a given response spectrum is difficult and complex to understand. Thus, this paper presents a simple time-domain method for generating a time history from a given response spectrum; the method was shown to satisfy conditions derived from nuclear regulatory guidance.

Keywords

References

  1. G. Kost, T. Tellkamp, H. Kamil, A. Gantayat, F. Weber, Automated generation of spectrum-compatible artificial time histories, Nucl. Eng. Des. 45 (1978) 243-249. https://doi.org/10.1016/0029-5493(78)90119-X
  2. S. Levy, J.P.D. Wilkinson, Generation of artificial time-histories, rich in all frequencies, from given response spectra, Nucl. Eng. Des. 38 (1976) 241-251. https://doi.org/10.1016/0029-5493(76)90099-6
  3. D.H. Jun, H.K. Pak, Y.B. Kim, Simulation of artificial ground accelerations to be used for seismic response analysis of building structures, Proc. Earthquake Eng. Soc. Korea 49 (1992) 111-120.
  4. N.C. Tsai, Spectrum-compatible motions for design purposes, J Eng Mech Div Proc ASCE 98 (1972) 345-356.
  5. P.C. Rizzo, D.E. Shaw, S.J. Jarecki, Development of real/synthetic time histories to match smooth design spectra, Nucl. Eng. Des. 32 (1975) 148-155. https://doi.org/10.1016/0029-5493(75)90096-5
  6. E.H. Vanmarcke, Structural response to earthquake, Chapter 8, in: C. Lomnitz, E. Rosenblueth (Eds.), Seismic Risk and Engineering Decisions, Elsevier Scientific Publishing Co., New York, 1976, pp. 287-337.
  7. D.A. Gasparini, E.H. Vanmarcke, SIMQKE, A Program for Artificial Motion Generation: User's Manual and Documentation, Department of Civil Engineering, MIT, USA, 1976.
  8. T.S. Aziz, J.K. Biswas, Spectrum-compatible time-histories for seismic design of nuclear power plants, Proceedings of the Third Canadian Conference on Earthquake Engineering, Vol. 1, 1979, pp. 301-324. Montreal.
  9. R.W. Clough, J. Penzien, Dynamics of Structures, third ed., Computers & Structures, Inc., Berkeley (CA), 2003.
  10. Design Response Spectra for Seismic Design of Nuclear Power Plants, Regulatory Guide 1.60 (Revision 1), US Nuclear Regulatory Commission, Washington D.C. (WA), 1973.
  11. Seismic Design Parameters, NUREG-0800, Standard Review Plan 3.7.1 (Revision 3), US Nuclear Regulatory Commission, Washington D.C. (WA), 2007.

Cited by

  1. Research on Influencing Factors and Generalized Power of Synthetic Artificial Seismic Wave vol.153, pp.None, 2016, https://doi.org/10.1088/1755-1315/153/6/062031
  2. 관측 자료를 활용한 지진가속도 시간이력 추정방법 제안 vol.24, pp.2, 2020, https://doi.org/10.11112/jksmi.2020.24.2.15
  3. Investigation of seismic responses of reactor vessel and internals for beyond-design basis earthquake using elasto-plastic time history analysis vol.53, pp.3, 2021, https://doi.org/10.1016/j.net.2020.08.011
  4. Investigation of Relationship between the Response and Fourier Spectral Ratios Based on Statistical Analyses of Strong-Motion Records vol.15, pp.2, 2021, https://doi.org/10.1142/s1793431121500081