The Journal of Advanced Prosthodontics

  • 제8권4호
  • /
  • Pages.296-303
  • /
  • 2016
  • /
  • 2005-7806(pISSN)
  • /
  • 2005-7814(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

Three dimensional deformation of dry-stored complete denture base at room temperature

  • Lim, Seo-Ryeon (Department of Prosthodontics, College of Dentistry, Dankook University) ;
  • Lee, Joon-Seok (Department of Prosthodontics, College of Dentistry, Dankook University)
  • 투고 : 2016.01.28
  • 심사 : 2016.05.30
  • 발행 : 2016.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSE. The aim of this study was to evaluate whether there is any typical deformation pattern existing in complete denture when it was dried by using the 3D scanner and surface matching program. MATERIALS AND METHODS. A total of 28 denture bases were fabricated with heat curing acrylic resin (each 14 upper and lower denture bases), and 14 denture bases (each 7 upper and lower denture bases) were stored in the water bottle (water stored), and another 14 denture bases were stored in the air (dry stored). Each specimen was scanned at $1^{st}$ day after deflasking, $14^{th}$ day after deflasking, and $28^{th}$ day after deflasking, and digitalized. Three dimensional deformation patterns were acquired by comparison of the data within storage group using surface matching program. For evaluating differences between groups, these data were compared statisticallyusing Kruskal Wallis and Mann Whitney-U test (${\alpha}$=.05). RESULTS. When evaluating 3D deformation of denture base, obvious deformations were not found in maxillary and mandibular water storage group. However, in dry stored group, typical deformation pattern was detected as storage time passes. It occurred mostly in first two weeks. Major deformations were found in the bilateral posterior area in both maxillary and mandibular group. In maxillary dry stored group, a statistical significance was found. CONCLUSION. It was proved that in both upper and lower denture bases, dry storage caused more dimensional deformation than water storage with typical pattern.

키워드

참고문헌

  1. Winkler S. Denture base resins. Dent Clin North Am 1984;28:287-97.
  2. Peyton FA. History of resins in dentistry. Dent Clin North Am 1975;19:211-22.
  3. Skinner EW, Cooper EN. Physical properties of denture resins: part I. Curing shrinkage and water sorption. J Am Dent Assoc 1943;30:1845-52. https://doi.org/10.14219/jada.archive.1943.0394
  4. Taylor PB. Acrylic resins: Their manipulation. J Am Dent Assoc 1941;28:373-87. https://doi.org/10.14219/jada.archive.1941.0064
  5. de Gee AJ, ten Harkel EC, Davidson CL. Measuring procedure for the determination of the three-dimensional shape of dentures. J Prosthet Dent 1979;42:149-53. https://doi.org/10.1016/0022-3913(79)90164-1
  6. Wong DM, Cheng LY, Chow TW, Clark RK. Effect of processing method on the dimensional accuracy and water sorption of acrylic resin dentures. J Prosthet Dent 1999;81:300-4. https://doi.org/10.1016/S0022-3913(99)70273-8
  7. Sweeney WT, Paffenbarger GC, Beall JR. Acrylic resins for dentures. J Am Dent Assoc 1942;29:7-33. https://doi.org/10.14219/jada.archive.1942.0390
  8. Woelfel JB, Paffenbarger GC, Sweeney WT. Changes in dentures during storage in water and in service. J Am Dent Assoc 1961;62:643-57. https://doi.org/10.14219/jada.archive.1961.0117
  9. Peyton FA, Mann WR. Acrylic and acrylic-styrene resins: Their procedures in relation to their uses as restorative materials. J Am Dent Assoc 1942;29:1852-64. https://doi.org/10.14219/jada.archive.1942.0266
  10. Yeung KC, Chow TW, Clark RK. Temperature and dimensional changes in the two-stage processing technique for complete dentures. J Dent 1995;23:245-53. https://doi.org/10.1016/0300-5712(95)91190-X
  11. Darvell BW, Clark RK. The physical mechanisms of complete denture retention. Br Dent J 2000;189:248-52.
  12. Mower y WE, Burns CL, Dickson G, Sweeney WT. Dimensional stability of denture base resins. J Am Dent Assoc 1958;57:345-53. https://doi.org/10.14219/jada.archive.1958.0165
  13. Consani RL, Monteiro VL, Mesquita MF, Consani S. The influence of storage on dimensional changes in maxillary acrylic denture bases and the effect on tooth displacement. Eur J Prosthodont Restor Dent 2011;19:105-10.
  14. Zarb GA, Bolender CL, Carlsson GE. Boucher's prosthodontic treatment for edentulous patients. 11th ed. St. Louis; CV Mosby; 1997. p. 380.
  15. Lee SH, Chang IT, Yim SH. Dimensional accuracy of denture base using laser scanner of reverse engineering technic. J Korean Acad Prosthodont 1999;37:167-84.
  16. Kim MJ, Kim CW. A comparative study on the dimensional change of the different denture bases. J Korean Acad Prosthodont 2006;44:712-21.
  17. Artopoulos A, Juszczyk AS, Rodriguez JM, Clark RK, Radford DR. Three-dimensional processing deformation of three denture base materials. J Prosthet Dent 2013;110:481-7. https://doi.org/10.1016/j.prosdent.2013.07.005
  18. Kimoto S, Kobayashi N, Kobayashi K, Kawara M. Effect of bench cooling on the dimensional accuracy of heat-cured acrylic denture base material. J Dent 2005;33:57-63. https://doi.org/10.1016/j.jdent.2004.08.002
  19. Consani RL, Mesquita MF, Consani S, Correr Sobrinho L, Sousa-Neto MD. Effect of water storage on tooth displacement in maxillary complete dentures. Braz Dent J 2006;17:53-7. https://doi.org/10.1590/S0103-64402006000100012
  20. Frejlich S, Dirckx JJ, Goodacre CJ, Swartz ML, Andres CJ. Moire topography for measuring the dimensional accuracy of resin complete denture bases. Int J Prosthodont 1989;2:272-9.
  21. Ristic B, Carr L. Water sorption by denture acrylic resin and consequent changes in vertical dimension. J Prosthet Dent 1987;58:689-93. https://doi.org/10.1016/0022-3913(87)90420-3

피인용 문헌

  1. 심한 치조골 흡수로 인해 편평한 치조제를 보이는 완전 무치악 환자에서 설측 교두 교합을 이용한 의치 수복 증례 vol.33, pp.3, 2016, https://doi.org/10.14368/jdras.2017.33.3.207
  2. Accuracy of digital complete dentures: A systematic review of in vitro studies vol.125, pp.2, 2016, https://doi.org/10.1016/j.prosdent.2020.01.004
  3. Effect of post-polymerization with autoclaving treatment on monomer elution and mechanical properties of 3D-printing acrylic resin for splint fabrication vol.126, pp.None, 2016, https://doi.org/10.1016/j.jmbbm.2021.105015