Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Improvement of Thermal and Adhesion Properties of Stone/Wood Composites for Stone Bed using CNT-epoxy Adhesive

CNT/Epoxy 접착제를 이용한 돌침대용 석재/목재 복합재의 열적특성 및 접착특성 개선 연구

  • Kim, Jong-Hyun (Department of Materials Engineering and Convergence Technology, Center for Creative Human Resource & Convergence Materials, Engineering Research Institute, Gyeongsang National University) ;
  • Shin, Pyeong-Su (Department of Materials Engineering and Convergence Technology, Center for Creative Human Resource & Convergence Materials, Engineering Research Institute, Gyeongsang National University) ;
  • Kwon, Dong-Jun (Department of Materials Engineering and Convergence Technology, Engineering Research Institute, Gyeongsang National University) ;
  • Moon, Sun-Ok (Major of Environmental Materials Science, Institute of Agriculture and Life Science Gyeongsang National University) ;
  • Park, Joung-Man (Department of Materials Engineering and Convergence Technology, Center for Creative Human Resource & Convergence Materials, Engineering Research Institute, Gyeongsang National University)
  • Received : 2016.08.10
  • Accepted : 2016.10.28
  • Published : 2016.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Improvement of the thermal and adhesion properties of stone/wood composites was studied. Tensile test was performed for wood and stone to know the basic mechanical properties. Real-time temperature of stone and wood was measured when stone and wood was heated. To compare thermal transfer properties of stone/wood composites, two types of specimens were tested: one was stone upper whereas another was wood upper. Real time temperature measurement and lap shear test were performed to know thermal and adhesion properties by using CNT-epoxy adhesive in which CNT was dispersed in epoxy adhesive uniformly. The thermal transfer property was better for the wood upper case than stone upper case. Adding CNT improved the heat transfer as well as mechanical properties including lap shear strength.

본 연구에서는 돌침대용 석재/목재 복합재의 열적특성 및 접착특성 개선에 대한 연구를 진행하였다. 기초 물성을 체크하기 위해 인장실험을 진행하였고 석재 및 목재의 실시간 온도측정을 진행하였다. 석재/목재 복합재의 가열부위에 따른 열적 특성을 알아보기 위해 석재를 위로 두었을 때와 목재를 위로 두었을 때 두 가지 방법으로 가열을 실시하였다. 에폭시 접착제에 CNT를 넣음으로써, 열적 및 접착특성의 변화를 알아보기 위하여 실시간 온도측정과 랩 전단 실험을 실시하였다. 실험결과 목재를 위로 두었을 때 열적 특성이 좋은 것을 확인하였고 에폭시 접착제에 CNT를 넣음으로써 접착특성 및 열적특성이 개선됨을 볼 수 있었다.

Keywords

References

  1. Han, J.E., and Nam, K.S., "A Study on Functional Development of Thermo-Bed through Structural Improvement and Urushi Lacquer Finishing", Korean Society of Design Science, Vol. 24, No. 4, 2011, pp. 57-66.
  2. Kwon, D.J., Shin, P.S., Choi, J.Y., Moon, S.O., and Park, J.M., "Interfacial and Mechanical Properties of Different Heat Treated Wood and Evaluation of Bonding Property between Stone and Wood for Rock Bed", Journal of Adhesion and Interface, Vol. 16, No. 2, 2015, pp. 69-75. https://doi.org/10.17702/jai.2015.16.2.69
  3. Lee, T.H., "Review of The Research and Development of Ceramic Matrix Composite Materials and Future Works", Composites Research, Vol. 27, No. 4, 2014, pp. 123-129. https://doi.org/10.7234/composres.2014.27.4.123
  4. MacVicar, R., Matuana, L.M., and Balatinecz J.J., "Aging Mechanisms in Cellulose Fiber Reinforced Cement Composites", Cement and Concrete Composites, Vol. 21, 1999, pp. 189-196. https://doi.org/10.1016/S0958-9465(98)00050-X
  5. Evgin, T., Koca, H.D., Horny, N., Tavman, H.I., Chirtoc, M., Omastova, M., and Novak, I., "Effect of Aspect Ratio on Thermal Conductivity of High Density Polyethylene/Multi-Walled Carbon Nanotubes Nanocomposites", Composites: Part A, Vol. 82, 2016, pp. 208-213. https://doi.org/10.1016/j.compositesa.2015.12.013
  6. Gardea, F., and Lagoudas, D.C., "Characterization of Electrical and Thermal Properties of Carbon Nanotube/Epoxy Composites", Composites Part B: Engineering, Vol. 56, 2014, pp. 611-620. https://doi.org/10.1016/j.compositesb.2013.08.032
  7. Moisala, A., Li, Q., Kinloch, I.A., and Windle, A.H., "Thermal and Electrical Conductivity of Single- and Multi-Walled Carbon Nanotube-Epoxy Composites", Composites Science and Technology, Vol. 66, 2006, pp. 1285-1288. https://doi.org/10.1016/j.compscitech.2005.10.016
  8. Wang, Z.J., Kwon, D.J., Park, J.K., Lee, W.I., and Park, J.M., "Microstructure and Ablation Performance of CNT-Phenolic Nanocomposites", Composites Research, Vol. 26, No. 5, 2013, pp. 309-314. https://doi.org/10.7234/composres.2013.26.5.309
  9. Park, J.M., Kwon, D.J., Wang, Z.J., Roh, J.U., Lee, W.I., Park, J.K., and DeVries, K.L., "Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/Phenolic Composites", Composites: Part B, Vol. 67, 2014, pp. 22-29. https://doi.org/10.1016/j.compositesb.2014.06.022
  10. Guru, K., Mishra, S.B., and Shukla, K.K., "Effect of Temperature and Functionalization on the Interfacial Properties of CNT Reinforced Nanocomposites", Applied Surface Science, Vol. 349, 2015, pp. 59-65. https://doi.org/10.1016/j.apsusc.2015.04.196
  11. Tang, Y.J., Alva, G., Huang, X., Su, D., Liu, L., and Fang, G., "Thermal Properties and Morphologies of MA-SA Eutectics/CNTs as Composite PCMs in Thermal Energy Storage", Energy and Buildings, Vol. 127, 2016, pp. 603-610. https://doi.org/10.1016/j.enbuild.2016.06.031
  12. Wang, Z.J., Kwon, D.J., Gu, G.Y., Kim, H.S., Kim, D.S., Lee, C.S., and Park, J.M., "Evaluation of Mechanical Properties and Damage Sensing of CNT-Polypropylene Composites by Electro-Micromechanical Techniques", Composites Research, Vol. 26, No. 1, 2013, pp. 1-6. https://doi.org/10.7234/kscm.2013.26.1.1
  13. Wang, B., Bai, Y., Hu, X., and Lu, P., "Enhanced Epoxy Adhesion between Steel Plates by Surface Treatment and CNT/Short-Fibre Reinforcement", Composites Science and Technology, Vol. 127, 2016, pp. 149-157 https://doi.org/10.1016/j.compscitech.2016.03.008
  14. Genna, D., Gaboury, D., Moore, L., and Mueller, W.U., "Use of Micro-XRF Chemical Analysis for Mapping Volcanogenic Massive Sulfide Related Hydrothermal Alteration: Application to the Subaqueous Felsic Dome-Flow Complex of the Cap d'Ours Section, Glenwood Rhyolite, Rouyn-Noranda, Quebec, Canada", Journal of Geochemical Exploration, Vol. 108, 2011, pp. 131-142. https://doi.org/10.1016/j.gexplo.2010.12.001