Journal of Energy Engineering (에너지공학)

The Korean Society for Energy (한국에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Optimization Analysis of Driving Gear of Large Capacity Non-contact Mixer for MLCC Electronic Materials

MLCC 전자재료용 대용량 비접촉식 교반기 구동기어의 형상최적화 구조해석

  • Received : 2016.08.11
  • Accepted : 2016.09.19
  • Published : 2016.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

MLCC is key parts of many electronic products and mixer is used to make MLCC. Currently, non-contact mixer is increasingly used due to its many merits. In case of large capacity non-contact mixer, function of driving gear is important. In this study, therefore, in order to reduce manufacturing cost through optimal design of driving gear of large capacity non-contact mixer, study on shape optimization of driving gear without excessive design modification was performed. As the results, because safety factors of modification model were decreased about 3.0 ~ 3.5 times compared with those of model with robust design, the possibility for saving manufacturing cost was confirmed.

MLCC는 각종 전자제품의 핵심부품이며 이러한 MLCC 부품을 제작하기 위해 교반기가 사용되어진다. 과거에는 접촉식 교반기가 많이 사용되었으나 현재는 여러 장점으로 인해 비접촉식 교반기의 사용이 증가 추세에 있다. 이와 같은 비접촉식 중에서 특히 대용량 비접촉식 교반기의 경우, 구동기어의 기능이 중요하다. 따라서 본 연구에서는 대용량 비접촉식 교반기 구동기어의 최적설계를 통한 제작비용 절감을 위해 기존 모델에서 과도한 설계 변경 없이 구동기어의 형상최적화 연구를 수행하였다. 그 결과, 강건 설계된 기존 모델과 비교하여 형상최적화 된 수정모델의 안전율이 약 3.0 ~ 3.5 배 감소한 것으로부터 제작비용 절감 가능성을 확인하였다.

Keywords

References

  1. Hong, J. O., Kim, S. H. and Hur, K. H., 2009, Development History and Trend of High-Capacitance Multi-layer Ceramic Capacitor in Korea, Journal of the Korean Ceramic Society, Vol. 46, No. 2, pp. 161-169 https://doi.org/10.4191/KCERS.2009.46.2.161
  2. Wi, S. K., 2011, Development Trends of MLCC Product, Journal of the Korean Ceramic Society, Vol. 14, No. 1, pp. 41-45
  3. Choi, B. J. and Yang, Y. J., 2016, Numerical Analysis on Characteristics of Flow Mixing of Non-contact Mixing for MLCC Electronic Materials, J. Korean Soc. Mech. Technol, Vol. 18, No. 3, pp. 355-362 https://doi.org/10.17958/ksmt.18.3.201606.355
  4. Choi, Y. G., Choi, J. R., Kim, D. J. and Hur, N. K., 2013, A Numerical Analysis on Mixing Performance for Various Types of Turbine Impeller in a Stirred Vessel, KSFM, Vol. 16, No. 1, pp. 47-55
  5. Kim, D. H. and Moon, Y. J., 2016, Control of Propeller Hub Vortex for Water Treatment Mixer, KSFM, Vol. 19, No. 2, pp. 11-15
  6. Park, C. I. and Cho, D. H., 2012, Comparison of Dynamic Characteristics of Spur Gears and Helical Gears, KSNVE, Vol. 22, No. 4, pp. 358-364 https://doi.org/10.5050/KSNVE.2012.22.4.358
  7. Parker, R. G., Agashe, V. and Vijayakar, S. M., 2000, Dynamic Response of a Planetary Gear System using a Finite Element/Contact Mechanics Model, Transaction of the ASME, Journal of Mechanical Design, Vol. 122, pp. 304-310 https://doi.org/10.1115/1.1286189
  8. Kubur, M., Kahraman, A., Zini, D. M. and Kienzle, K., 2004, Dynamic Analysis of Multi-Shaft Helical Gear Transmission by Finite Elements : Model and Experiment, Transaction of the ASME, Journal of Vibration and Acoustics, Vol. 126, pp. 398-406 https://doi.org/10.1115/1.1760561
  9. Lee, C. M., Ahn, J. W. and Kim, D. H., 2015, A Study on Shape Optimization of High-Speed Index Table with Hypoid Gear, J. Korean Soc. Precis. Eng., Vol. 32, No. 2, pp. 179-184 https://doi.org/10.7736/KSPE.2015.32.2.179
  10. Jang, J. M., Kim, Y. G., Hur, J. H. and Na, S. M., 2009, A Study on Rigid Front Axle Shape Optimization of a Commercial Vehicle by Hydroforming Process, KSME, Vol. 33, No. 3, pp. 231-236 https://doi.org/10.3795/KSME-A.2009.33.3.231
  11. Lyoo, T. H. and Kim, C. S., 2007, The Valuation of HSA Business Using Broadband over Power Line, Journal of Energy Engineering, Vol. 16, No. 4, pp. 202-214