DOI QR코드

DOI QR Code

병진 및 회전 감쇠동흡진기를 사용한 보의 진동저감

Beam Vibration Suppression with Translational and Rotational Damped Dynamic Vibration Absorbers

  • Park, Sung Gyu (School of Mechanical Engineering, Pusan National University) ;
  • Lee, Shi Bok (School of Mechanical Engineering, Pusan National University)
  • 투고 : 2016.08.30
  • 심사 : 2016.10.05
  • 발행 : 2016.11.20

초록

The combined rotational and translational dynamic vibration absorbers (DVA) with no dampers for the beam vibration control can effectively isolate the vibration within the external excitation force region. This paper investigates the damping efficacy for the combined rotational and translational dynamic vibration absorbers to impose some robustness to the DVA system for the excitation force frequency variation. The beam is assumed to be subjected to a concentrated harmonic excitation force. The solution to the problem is found based on Galerkin method.

키워드

참고문헌

  1. Den Hartog, J. P., 1985, Mechanical Vibrations, Dover Publications, New York.
  2. Asami, T., Nishihara, O. and Baz, A. M., 2002, Analytical Solutions to H and H2 Optimization of Dynamic Vibration Absorbers Attached to Damped Linear Systems, Journal of Vibration and Acoustics, Vol. 124, No. 2, pp. 284~295. https://doi.org/10.1115/1.1456458
  3. Jacquot, R. G., 1978, Optimal Dynamic Vibration Absorbers for General Beam Systems, Journal of Sound and Vibration, Vol. 60, No. 4, pp. 535~542. https://doi.org/10.1016/S0022-460X(78)80090-X
  4. Park, N. C., Lim, S. H., Kim, K. T., Cho, U. R., Park, Y. P. et al., 2008, Vibration Reduction in Optical Disk Drive Using Cantilever Type Dynamic Vibration Absorber, Proceedings of the KSNVE Annual Autumn Conference, pp. 414~416.
  5. Yamaguchi, H., 1985, Vibrations of a Beam with an Absorber Consisting of a Viscoelastic Beam and a Spring-Viscous Damper, Journal of Sound and Vibration, Vol. 103, No. 3, pp. 417~425. https://doi.org/10.1016/0022-460X(85)90432-8
  6. Zuo, L., 2009, Effective and Robust Vibration Control using Series Multiple Tuned-mass Dampers, Journal of Vibration and Acoustics, Vol. 131, No. 3, 031003. https://doi.org/10.1115/1.3085879
  7. Cha, P. D. and Zhou, X., 2006, Imposing Points of Zero Displacements and Zero Slopes along any Linear Structure during Harmonic Excitations, Journal of Sound and Vibration, Vol. 297, No. 1-2, pp. 55~71 https://doi.org/10.1016/j.jsv.2006.03.032
  8. Wong, W. O., Tang, S. L., Cheung, Y. L. and Cheng, L., 2007, Design of a Dynamic Vibration Absorber for Vibration Isolation of Beams under Point or Distributed Loading, Journal of Sound and Vibration, Vol. 301, No. 3~5, pp. 898~908. https://doi.org/10.1016/j.jsv.2006.10.028
  9. Cheung, Y. L. and Wong, W. O., 2008, Isolation of Bending Vibration in a Beam Structure with a Translational Vibration Absorber and a Rotational Vibration Absorber, Journal of Vibration and Control, Vol. 14, No. 8, pp. 1231~1246. https://doi.org/10.1177/1077546307083174
  10. Latas, W., 2015, Optimal Positions of Tunable Translational and Rotational Dynamic Absorbers in Global Vibration Control in Beams, Journal of Theoretical and Applied Mechanics, Vol. 53, No. 2, pp. 467~476.