DOI QR코드

DOI QR Code

Numerical analysis of circular steel tube confined UHPC stub columns

  • Hoang, An Le (Faculty of Civil and Environmental Engineering, Institute of Structural Engineering, University of Kassel) ;
  • Fehlinga, Ekkehard (Faculty of Civil and Environmental Engineering, Institute of Structural Engineering, University of Kassel)
  • 투고 : 2016.07.02
  • 심사 : 2016.12.24
  • 발행 : 2017.03.25

초록

In this paper, a finite element model (FEM) in ATENA-3D software was constructed to investigate the behavior of circular ultra high performance concrete (UHPC) filled steel tube stub columns (UHPC-FSTCs) under concentric loading on concrete core. The "CC3DNonLinCementitious2User" material type for concrete in ATENA-3D software with some modifications of material laws, was adopted to model for UHPC core with consideration the confinement effect. The experimental results obtained from Schneider (2006) were then employed to verify the accuracy of FEM. Extensive parametric analysis was also conducted to examine the influence of concrete compressive strength, steel tube thickness and steel yield strength on the compressive behavior of short circular UHPC-FSTCs. It can be observed that the columns with thicker steel tube show better strength and ductility, the sudden drop of load after initial peak load can be prevented. Based on the regression analysis of the results from parametric study, simplified formulae for predicting ultimate loads and strains were proposed and verified by comparing with previous analytical models, design codes and experimental results.

키워드

참고문헌

  1. American Institute of Steel Construction (ANSI/AISC 360-10) (2010), Specification for Structural Steel Buildings, An American National Standard.
  2. An, L.H., Fehling, E. and Ismail, M. (2016), "Numerical modelling of circular concrete filled steel tube stub columns under concentric loading", Proceedings of the HiPerMat, 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials, Kassel, Germany, March.
  3. Architectural Institute of Japan (AIJ) (2001), Recommendation for Design and Construction of Concrete Filled Steel Tubular Structures, Japan.
  4. Cervenka, V., Jendele, L. and Cervenka, J. (2013), ATENA Program Documentation Part 1-Theory, Prague, Czech Republic.
  5. Chu, K. (2014), "Axial load behaviour of steel tube columns infilled with various high-performance concretes", M.S. Dissertation, Ryerson University, Toronto, Canada.
  6. Eurocode 4 (2004), Design of Composite Steel and Concrete Structures, Part 1-1, General Rules and Rules for Building, British Standards Institution, London, U.K.
  7. Fehling, E., Leutbecher, T., Roder, F.K. and Sturwald, S. (2008), "Structural behavior of UHPC under biaxial loading", Proceedings of the 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  8. Fehling, E., Schmidt, M., Walraven, J., Leutbecher, T. and Frohlich, S. (2014), Ultra-High Performance Concrete: Fundamental-Design-Example, Wilhelm Ernst & Sohn, Verlag fur Architektur und technische Wissenschaften GmbH & Co. KG, Berlin, Germany.
  9. Guler, S., Aydogan, M. and Copur, A. (2013), Axial Capacity and Ductility of Circular UHPC-Filled Steel Tube Columns, Magazine of Concrete Research.
  10. Han, L.H., Li, W. and Bjorhovde, R. (2014), "Development and advanced applications of concrete-filled steel tubular (CFST) structures: Members", J. Constr. Steel Res., 100, 211-228. https://doi.org/10.1016/j.jcsr.2014.04.016
  11. Han, L.H., Yao, G.H., Chen, Z.P. and Yu, Q. (2005), "Experimental behavior of steel tube confined concrete (STCC) columns", Steel Compos. Struct., 5(6), 459-484. https://doi.org/10.12989/scs.2005.5.6.459
  12. Hatzigeorgiou, G.D. (2008), "Numerical model for the behavior and capacity of circular CFT columns, part I: Theory", Eng. Struct., 30(6), 1573-1578. https://doi.org/10.1016/j.engstruct.2007.11.001
  13. Johansson, M. (2002), "Composite action and confinement effects in tubular steel-concrete columns", Ph.D. Dissertation, Chalmers University of Technology, Goteborg, Sweden.
  14. Leutbecher, T. (2008), "Rissbildung und zugtragverhalten von mit fasern und stabstahl bewehrtem ultrahochfesten beton (UHPC)", Ph.D. Dissertation, University of Kassel, Germany.
  15. Liew, J.Y.R. and Xiong, D.X. (2010), "Experimental investigation on tubular columns infilled with ultra-high strength concrete", Tubul. Struct. XIII, The University of Hong Kong, Hong Kong.
  16. Liew, J.Y.R. and Xiong, D.X. (2012), "Ultra-high strength concrete filled composite columns for multi-storey building construction", Adv. Struct. Eng., 15(9), 1487-1503. https://doi.org/10.1260/1369-4332.15.9.1487
  17. Liew, J.Y.R., Xiong, M.X. and Xiong, D.X. (2014), "Design of high strength concrete filled tubular columns for tall buildings", J. High-Rise Build., 3(3), 215-221.
  18. Liew, J.Y.R. and Xiong, M.X. (2015), Design Guide for Concrete Filled Tubular Members with High Strength Materials to Eurocode 4, Research Publishing, Singapore.
  19. O'Shea, M.D. and Bridge, R.Q. (2000), "Design of circular thin-walled concrete filled steel tubes", J. Struct. Eng., 126(11), 1295-1303. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295)
  20. Pryl, D. and Cervenka, J. (2015), ATENA Program Documentation Part 11-Troubleshooting Manual, Cervenka Consulting s.r.o., Prague, Czech Republic.
  21. Schneider, H. (2006), "Zum tragverhalten kurzer, umschnurter, kreisformiger, druckglieder aus ungefasertem UHFB", Ph.D. Dissertation, University of Leipzig, Leipzig, Germany.
  22. Scholle, N. and Lohaus, L. (2012), "Numerical analyses of filigree steel-wrapped UHPC tubes", Proceedings of the 13th Bilateral Czech/German Symposium, Prague, Czech Republic, June.
  23. Song, T.Y. and Liew, J.Y.R. (2012), "Simulation model for ultra-high strength concrete filled composite column under static loads", Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures, National University of Singapore, Singapore, July.
  24. Speck, K. and Curbach, M. (2011), Mehraxiale Festigkeit von UHPC (Drug-Zug und Zug-Zug-Festigkeit), Vortrag in Zwischenkolloquium SPP1182, Kassel, Germany.
  25. Tao, Z., Wang, Z.B. and Yu, Q. (2013), "Finite element modeling of concrete filled steel stub columns under axial compression", J. Constr. Steel Res., 89, 121-131. https://doi.org/10.1016/j.jcsr.2013.07.001
  26. Tue, N.V., Kuchler, M., Schenck, G. and Jurgen, R. (2004b), "Application of UHPC filled tubes in buildings and bridges", Proceedings of the International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  27. Tue, N.V., Schneider, H., Simsch, G. and Schmidt, D. (2004a), "Bearing capacity of stub columns made of NSC, HSC and UHPC confined by a steel tube", Proceedings of the International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  28. Xiong, D.X. (2012), "Structural behaviour of concrete filled steel tube with high strength materials", Ph.D. Dissertation, National University of Singapore, Singapore.
  29. Yan, P.Y. and Feng, J.W. (2008), "Mechanical behavior of UHPC and UHPC filled steel tubular stub columns", Proceedings of the 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  30. Yang, Z., Zhang, Y., Chen, M. and Chen, G. (2013), "Numerical simulation of ultra-strength concrete-filled steel columns", Eng. Rev., 33(3), 211-217.
  31. Yu, Q., Tao, Z., Liu, W. and Chen, Z.B. (2010), "Analysis and calculations of steel tube confined concrete (STCC) stub columns", J. Constr. Steel Res., 66(1), 53-64. https://doi.org/10.1016/j.jcsr.2009.08.003

피인용 문헌

  1. Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete vol.153, 2017, https://doi.org/10.1016/j.conbuildmat.2017.07.130
  2. Numerical study of circular steel tube confined concrete (STCC) stub columns vol.136, 2017, https://doi.org/10.1016/j.jcsr.2017.05.020
  3. A review and analysis of circular UHPC filled steel tube columns under axial loading vol.62, pp.4, 2017, https://doi.org/10.12989/sem.2017.62.4.417
  4. Assessment of stress-strain model for UHPC confined by steel tube stub columns vol.63, pp.3, 2017, https://doi.org/10.12989/sem.2017.63.3.371
  5. FE modeling of Partially Steel-Jacketed (PSJ) RC columns using CDP model vol.22, pp.2, 2017, https://doi.org/10.12989/cac.2018.22.2.143
  6. Numerical simulation and analytical assessment of STCC columns filled with UHPC and UHPFRC vol.70, pp.1, 2017, https://doi.org/10.12989/sem.2019.70.1.013
  7. Moment-Curvature Behavior of PP-ECC Bridge Piers under Reversed Cyclic Lateral Loading: An Experimental Study vol.10, pp.12, 2017, https://doi.org/10.3390/app10124056
  8. Test and simulation of circular steel tube confined concrete (STCC) columns made of plain UHPC vol.75, pp.6, 2017, https://doi.org/10.12989/sem.2020.75.6.643
  9. Comparing cyclic behaviour of RBS, DFC and proposed rigid connections in a steel moment frame with CFT column vol.19, pp.2, 2021, https://doi.org/10.1080/14488353.2020.1854941