DOI QR코드

DOI QR Code

수치해석을 이용한 탄소강 다단 신선 와이어 표면 잔류응력 예측

Prediction of Surface Residual Stress of Multi-pass Drawn Steel Wire Using Numerical Analysis

  • 이선봉 (계명대학교 기계자동차공학과) ;
  • 이인규 (한국생산기술연구원 극한가공기술그룹) ;
  • 정명식 (한국생산기술연구원 극한가공기술그룹) ;
  • 김병민 (부산대학교 기계공학부) ;
  • 이상곤
  • 투고 : 2017.03.20
  • 심사 : 2017.05.18
  • 발행 : 2017.06.01

초록

The tensile surface residual stress in the multi-pass drawn wire deteriorates the mechanical properties of the wire. Therefore, the evaluation of the residual stress is very important. Especially, the axial residual stress on the wire surface is the highest. Therefore, the objective of this study was to propose an axial surface residual stress prediction model of the multi-pass drawn steel wire. In order to achieve this objective, an elastoplastic finite element (FE) analysis was carried out to investigate the effect of semi-die angle and reduction ratio of the axial surface residual stress. By using the results of the FE analysis, a surface residual stress prediction model was proposed. In order to verify the effectiveness of the prediction model, the predicted residual stress was compared to that of a wire drawing experiment.

키워드

참고문헌

  1. C. S. Kim, K. S. Hong, M. K. Kim, 2005, Nonlinear Robust Control of a Hydraulic Elevator, Control Eng. Pract., Vol. 13, No. 6, pp. 789-803. https://doi.org/10.1016/j.conengprac.2004.09.003
  2. R. S. Chandel, S. R. Bala, 1986, Effect of Welding Parameters and Groove Angle on the Soundness of Root Beads Deposited by the SAW Process, Proc. Of Trends in Welding Research, Gatlinburg, Tennessee, USA, pp. 479-485.
  3. S. Kalpakjian, S. R. Schmid, 1992, Manufacturing Processes for Engineering Materials, Second Ed. Addison-Wesley Publishing Company, New York, USA.
  4. C. F. Yu, Z. L. Xue, W. T. Jin, 2016, Precipitation and Solid Solution of Titanium Carbonitride Inclusions in Hypereutectoid Tire Cord Steel, J. Iron, Steel Res. Int. Vol. 23, No. 4, pp. 338-343. https://doi.org/10.1016/S1006-706X(16)30054-1
  5. S. K. Lee, B. M. Kim, 2005, Analysis of Multi-pass Wet Drawing Process and Its Application, Trans. Mater. Process., Vol. 14, No. 8, pp. 689-695. https://doi.org/10.5228/KSPP.2005.14.8.689
  6. J. Toribio, M. Lorenzo, D. Vergara, 2016, Hydrogen Embrittlement Susceptibility of Prestressing Steel Wires: the Role of the Cold-drawing Conditions, Procedia Struct. Integrity, Vol. 2, pp. 626-631. https://doi.org/10.1016/j.prostr.2016.06.081
  7. S. K. Lee, D. W. Kim, M. S. Jeong, B. M. Kim, 2012, Evaluation of Axial Surface Residual Stress in 0.82wt% Carbon Steel Wire During Multi-pass Drawing Process Considering Heat Generation, Mater. Des., Vol. 34, pp. 363-371. https://doi.org/10.1016/j.matdes.2011.06.036
  8. J. J. Atienza, M. L. Martinez-Perez, J. Ruiz-Hervias, F. Mompean, M. Garcia-Hernandez, M. Elices, 2005, Residual Stress in Cold Drawn Ferritic Rods, Scr. Mater., Vol. 52, No. 4, pp. 305-309. https://doi.org/10.1016/j.scriptamat.2004.10.010
  9. H. Overstam, 2006, The Influence of Bearing Geometry on the Residual Stress State in Cold Drawn Wire, Analysed by the FEM, J. Mater. Process. Technol., Vol. 171, No. 3, pp. 446-450. https://doi.org/10.1016/j.jmatprotec.2005.08.012
  10. T. Kuboki, M. Akiyama, Y. Neishi, K. Kuroda, 2000, Effect of Final Drawing with Light Reduction on the Leveling of Residual Stress Distribution in Cold Bar Drawing, Proc. Inst. Mech. Eng. Prat C, Vol. 214, No. 11, pp. 1389-1399. https://doi.org/10.1243/0954406001523362
  11. T. Kuboki, I. Kawakami, M. Neishi, K. Kuroda, M. Akiyama, 2001, A Study on the Influence of Mechanical Properties on the Distribution of Axial Residual Stress after Cold Drawing of Metallic Bars, Mater. Sci. Res. Int., Vol. 7, No. 1, pp. 41-46.
  12. T. Kuboki T, M. Akiyama M, Y. Neishi, K. Kuroda, 2001, Effect of Die Geometry on Residual Stress Level Present after Bar Drawing, Ironmaking Steelmakaking, Vol. 28, No. 1, pp. 65-71. https://doi.org/10.1179/irs.2001.28.1.65
  13. D. C. Ko, S. K. Lee, W. H. Hwang, B. M. Kim, C. M. Bae, 2007, The Evaluation of Residual Stress on the Drawn Wire using Nano-indentation Test, J. Mater. Process. Technol., Vol. 191, No. 1, pp. 64-67. https://doi.org/10.1016/j.jmatprotec.2007.03.061
  14. J. Toribio, M. Lorenzo, D. Vergara, L. Aguado, 2016, Residual Stress Redistribution Induced by Fatigue in Cold-drawn Prestressing Steel Wires, Constr. Build. Mater., Vol. 114, pp. 317-322. https://doi.org/10.1016/j.conbuildmat.2016.03.037
  15. M. Akiyama, T. Kuboki, 2002, Optimisation of Method for Residual Stresses after Cold Bar Drawing, Ironmaking Steelmaking, Vol. 29, No. 2, pp. 101-106. https://doi.org/10.1179/030192302225001974
  16. Y. H. Lee, D. I. Kwon, 2003, Measurement of Residual Stress Effect by Nanoindenatation on Elastically Strained (100) W, Scr. Mater., Vol. 49, No. 5, pp. 459-465. https://doi.org/10.1016/S1359-6462(03)00290-2