Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Sand Casting Process Design for the Bush Parts of the Continuous Hot Zinc Plating Roll Applied to Wear-Resistant Alloy Cast Steel

내마모 합금주강 소재를 적용한 연속용융아연도금설비 Roll용 부쉬의 사형 주조공정 설계

  • 박동환 (경북하이브리드부품연구원) ;
  • 윤재정 (경북하이브리드부품연구원) ;
  • 홍진태 ((주)부강특수산업) ;
  • 권혁홍 (대진대학교 컴퓨터응용기계공학과)
  • Received : 2017.07.09
  • Accepted : 2017.07.22
  • Published : 2017.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

In the sand casting process, the flow of liquid metal affects the quality of casting products and their die life. To determine the optimal bush part design process, this study performed various analyses using commercial finite element analysis S/W. The simulation focused on the molten metal behaviors during the mold filling and solidification stages of sand casting. This study aims to develop methods to reduce the cost and increase the tool life of the continuous hot zinc plating roll.

Keywords

References

  1. Ann, S. J., Kang, M. R., Seo, D. S., Kim, Y. H., Lee, K. H., Kim, H. S., "A Study on the High Temperature Strength of Ferritic Stainless Cast Steels," Journal of Korea Foundry Society, Vol. 18, No. 6, pp. 563-569, 1998.
  2. Lee, K. D., Ha, T. K., Jung, J. Y., "Characterization of High Temperature Mechanical Properties of Cast Stainless Steels for Exhaust Manifold," Transactions of Materials Processing, Vol. 18, No. 3, pp. 217-222, 2009. https://doi.org/10.5228/KSPP.2009.18.3.217
  3. Kim, S. W., Park, J. S., Khalil, K. A., "Effects of C, Si and RE on Microstructures of DCI using Permanent Mold Casting," Journal of Korea Foundry Society, Vol. 26, No. 4, pp. 174-179, 2006.
  4. Kim, S. T., Park, Y. S., "Effects of Copper and Sulfur Additions on Machinability Behavior of High Performance Austenitic Stainless Steel," Metals and Materials International, Vol. 15, No. 2, pp. 221-230, 2009. https://doi.org/10.1007/s12540-009-0221-6
  5. Kayali, Y., Buyuksagis, A., Yalcin, Y., "Corrosion and Wear Behavior of Boronized AISI316L Stainless Steel," Metals and Materials International, Vol. 19, No. 5, pp. 1053-1061, 2013. https://doi.org/10.1007/s12540-013-5019-x
  6. Kim, Y. S., Kwon, W. T., Seo, M. S., Kang, S. H., "Tool Performance of New Wear-Resistant Cermets," International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 6, pp. 941-946, 2012. https://doi.org/10.1007/s12541-012-0122-3
  7. Yoon, H. S., Oh, Y. K., "Numerical Study on Thermal Deformation of AC4C and AC7A Casting Material," Journal of The Korean Society of Manufacturing Technology Engineers, Vol. 20, No. 5, pp. 541-546, 2011.
  8. Kim, E. S., "Die Casting Process Design for Gear Housing of Automobile Transmission by using MAGMA Soft," Transactions of Materials Processing, Vol. 14, No. 2, pp. 112-120, 2005. https://doi.org/10.5228/KSPP.2005.14.2.112
  9. Kim, Y. C., Cho, S. W., Cho, J. I., Jeong, C. Y., Kang, C. S., "Optimization of the Thin-walled Aluminum Die Casting Die Design by Solidification Simulation," Journal of Korea Foundry Society, Vol. 28, No. 4, pp. 190-194, 2008.
  10. Han, J. J., Kwon, H. W., "Effects of Alloying Element and Grain Refinement on the Tensile Properties of Mg-Alloy Casted with Sand Mold," Journal of Korea Foundry Society, Vol. 31, No. 4, pp. 212-217, 2011. https://doi.org/10.7777/jkfs.2011.31.4.212
  11. Choi, S. R., Kim, C. K., Park, K., Oh, C. H., "Development of Precision Casting Technology for Lnlet Gear Box using Selective Laser Sintering," Journal of the Korean Society of Machine Tool Engineers, Vol. 9, No. 1, pp. 30-37, 2000.
  12. Han, K. T., "Research on the Mold Design of Motor Housing using Die Casting Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 36-41, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.036
  13. Kim, J. D., Yoon, M. C., "Decision-Making of Casting Process using Expert System," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 54-60, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.054
  14. Nawi, I., Siswanto, W. A., Ismail, A. E., "A Study of Auto Pour in Sand Casting Process," Applied Mechanics and Materials, Vol. 660, pp. 74-78, 2014. https://doi.org/10.4028/www.scientific.net/AMM.660.74
  15. Kim, M. G., Kim, Y. J., "Investigation of Interface Reaction between TiAl Alloys and Mold Materials," Metals and Materials International, Vol. 8, No. 3, pp. 289-293, 2002. https://doi.org/10.1007/BF03186098
  16. Kang, D. M., Park, K. D., Park, J. H., "High Temperature Creep Strength of Mg-Nd-Zr-Zn Alloy in Sand Castings," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 6, pp. 83-88, 2011.

Cited by

  1. 고온 진공 브레이징을 이용한 초경합금과 스테인리스강의 접합 계면 특성 vol.29, pp.6, 2020, https://doi.org/10.5228/kstp.2020.29.6.307