DOI QR코드

DOI QR Code

Development of a numerical simulation tool for efficient and robust prediction of ship resistance

  • Kim, Geon-Hong (Hyundai Maritime Research Institute, Hyundai Heavy Industries Co., Ltd) ;
  • Park, Sanghoon (Hyundai Maritime Research Institute, Hyundai Heavy Industries Co., Ltd)
  • Received : 2016.06.07
  • Accepted : 2017.01.08
  • Published : 2017.09.30

Abstract

In this paper, a two-phase flow solver $HiFoam^{(R)}$ has been developed based on the $OpenFOAM^{(R)}$ to predict resistance of a ship in calm water. The VOF method of $OpenFOAM^{(R)}$ was reviewed and a simple flux limiter was introduced to enhance the robustness of the solver. The procedure for predicting ship motion was modified by introducing Quasi-Steady Fluid-Body Interaction (QS-FBI) with least square regression to improve the efficiency. Other minor factors were considered as well in terms of the efficiency and robustness. The HiFoam was applied to KCS and JBC simulations to validate its efficiency and accuracy by comparing the results to experimental data and STAR-CCM+. The $HiFoam^{(R)}$ was also applied to various ships and it showed good agreements to the experimental data.

Keywords

References

  1. Brackbill, J.U., Kothe, D.B., Zemach, C., 1992. A continuum method for modeling surface tension. J. Comput. Phys. 100, 335-354. https://doi.org/10.1016/0021-9991(92)90240-Y
  2. Jasak, H., Vukcevic, V., Christ, D., 20-27 November 2014. Rapid free surface simulation for steady-state hull resistance with FVM using FOAM-extend. In: 30th Symposium on Naval Hydrodynamics, Hobart, Tasmania, Australia.
  3. Kim, G.H., Jun, J.H., 2-4 Dec 2015. Numerical simulations for predicting resistance and self-propulsion performances of JBC using OpenFOAM and STAR-CCM+. In: Tokyo 2015 a Workshop on CFD in Ship Hydrodynamics. National Maritime Research Institute, Tokyo, Japan.
  4. Larsson, L., Stern, F., Visonneau, M., Nobuyuki, H., Takanori, H., Kim, J., 2-4 Dec 2015. In: Proceedings of Tokyo 2015 a Workshop on CFD in Ship Hydrodynamics. National Maritime Research Institute, Tokyo, Japan.
  5. Lee, S.B., 23-26 June, 2014. Application of OpenFOAM to prediction of ship performances. In: 9th International OpenFOAM Workshop, Zagreb, Croatia.
  6. Lee, S.B., 11-14 June, 2013. Application of OpenFOAM to prediction of hull resistance. In: 8th International OpenFOAM Workshop, Jeju, South Korea.
  7. Muzaferija, S., Peric, M., Sames, P., Schelin, T., 1999. A two-fluid Navier-Stokes solvers to simulate water entry. In: Twenty-Second Symposium on Naval Hydrodynamics.
  8. Newman, J.N., 14-18 Dec 1992. Panel methods in marine hydrodynamics. In: 11th Australasian Fluid Mechanics Conference, University of Tasmania, Hobart, Australia.
  9. OpenFOAM, http://www.openfoam.org.
  10. Palacios, F., Colonno, M.R., Aranake, A.C., Campos, A., Copeland, S.R., Economon, T.D., Lonkar, A.K., Lukaczyk, T.W., Taylor, T.W.R., Alonso, J.J., 2013. Stanford University Unstructured (SU2): An Open-Source Integrated Computational Environment for Multi-Physics Simulation and Design. AIAA Paper 2013-0287.
  11. Palacios, F., Economon, T.D., Aranake, A.C., Copeland, S.R., Lonkar, A.K., Lukaczyk, T.W., Manosalvas, D.E., Naik, K.R., Padron, A.S., Tracey, B., Variya, A., Alonso, J.J., 2014. Stanford University Unstructured (SU2): Open-Source Analysis and Design Technology for Turbulent Flows. AIAA Paper 2014-0243.
  12. Park, S.H., Rhee, S.H., 2014. Numerical diffusion decrease of free-surface flow analysis using source term in volume fraction transport equation. J. Comput. Fluids Eng. 19 (No.1), 15-20. https://doi.org/10.6112/kscfe.2014.19.1.015
  13. Park, S.H., Park, S.W., Rhee, S.H., Lee, S.B., Choi, J.E., Kang, S.H., 2013. Investigation on the wall function implementation for the prediction of ship resistance. Int. J. Nav. Archit. Ocean Eng. 5 (No.1), 33-46. https://doi.org/10.2478/IJNAOE-2013-0116
  14. Rhie, C.M., Chow, W.L., 1982. A numerical study of the turbulent flow past an isolated airfoil with trailing edge separation. In: AIAA-82-0998, AIAA/ASME 3rd Joint Thermophysics, Fluids, Plasma and Heat Transfer Conference, St. Louis, Missouri.
  15. Rusche, H., 2002. Computational Fluid Dynamics of Dispersed Two-Phase Flows at High Phase Fractions. Ph.D. thesis. Imperial College of Science, Technology & Medicine.
  16. Sweby, P.K., 1984. High resolution schemes using flux limiters for hyperbolic conservation laws. SIAM J. Numer. Analysis 21 (No.5), 995-1011. https://doi.org/10.1137/0721062
  17. Ubink, O., 1997. Numerical Prediction of Two Fluid Systems with Sharp Interface. Ph.D. thesis. University of London.
  18. STAR-CCM+ User Guide, CD-adapco.
  19. Van, S.H., Kim, W.J., Yim, G.T., Kim, D.H., Lee, C.J., 1998. Experimental investigation of the flow characteristics around practical hull forms. In: Proceedings 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design, Osaka Japan.
  20. van Leer, B., 1979. Towards the ultimate conservative difference scheme. J. Comput. Phys. 32 (1), 101-136. https://doi.org/10.1016/0021-9991(79)90145-1
  21. Weller, H.G., 2002. Derivation, Modeling, and Solution of the Conditionally Averaged Two-phase Flow Equations. Technical Report TR/HGW/02. Nabla Ltd.
  22. Witherden, F.D., Farrington, A.M., Vincent, P.E., 2014. An open source framework for solving advection-diffusion type problems on streaming architectures using the flux reconstruction approach. Comput. Phys. Commun. 185, 3028-3040. https://doi.org/10.1016/j.cpc.2014.07.011

Cited by

  1. Influence of the Symmetry Plane Boundary Condition on the Planing Multihull Calm Water Resistance Test. CFD to Towing Tank Comparison vol.1, pp.1, 2017, https://doi.org/10.2478/ntpe-2018-0048
  2. The sensitivity of ship resistance to wall-adjacent grids and near-wall treatments vol.10, pp.6, 2017, https://doi.org/10.1016/j.ijnaoe.2017.12.003
  3. A parametric morphing method for generating structured meshes for marine free surface flow applications with plane symmetry vol.6, pp.3, 2019, https://doi.org/10.1016/j.jcde.2018.11.002
  4. Dynamics of rising bubbles in initially quiescent liquids that are later on disturbed by falling drops vol.42, pp.10, 2017, https://doi.org/10.1007/s40430-020-02612-y
  5. A Flow Analysis of Small Craft by Using CFD vol.7, pp.4, 2017, https://doi.org/10.33851/jmis.2020.7.4.269
  6. Novel tri-viscous model to simulate pumping of flowable concrete through characterization of lubrication layer and plug zones vol.126, pp.None, 2022, https://doi.org/10.1016/j.cemconcomp.2021.104370