Korean Chemical Engineering Research

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지
DOI QR코드

DOI QR Code

Synthesis of Eco-Friendly High Solid Acrylic Resins and Curing Properties of Acrylic Urethane Resin Coatings

환경 친화형 하이솔리드 아크릴수지의 합성과 아크릴 우레탄 도료의 경화 특성

  • Kim, Jin-Wook (Department of Chemical Engineering, Kwangwoon University) ;
  • Lee, Dong-Chan (Department of Chemical Engineering, Kwangwoon University) ;
  • Choi, Joong-So (Department of Chemical Engineering, Kwangwoon University)
  • 김진욱 (광운대학교 화학공학과) ;
  • 이동찬 (광운대학교 화학공학과) ;
  • 최중소 (광운대학교 화학공학과)
  • Received : 2017.04.19
  • Accepted : 2017.04.25
  • Published : 2017.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, acrylic resins with solids content of 75% were prepared by addition polymerization of n-butyl acrylate (BA), methyl methacrylate (MMA), 2-hydroxypropyl methacrylate (HPMA) and acetoacetoxyethyl methacrylate (AAEM) monomers. At this time, the glass transition temperature ($T_g$) of the acrylic resin was changed to 20, 30 and $40^{\circ}C$, and the hydroxyl value (OH value) was changed to 60, 90 and 120. As a result, the viscosity of acrylic resin increased with increasing $T_g$ and hydroxyl (OH) value. The synthesized acrylic resin was designed to have a high cross-link density to maintain high elasticity and high durability. The crosslinked acrylic resin was used to prepare an acrylic urethane clear coating by curing reaction with a block isocyanate (Desmodur BL-3175). The physical properties of the clear paints were analyzed by measuring viscosity, adhesion, pencil hardness and $60^{\circ}$ specular gloss. Acrylic urethane clear coatings were prepared as specimens and evaluated for various properties to be applied as top coatings for coil coating. The prepared coatings were excellent in adhesion, excellent in $60^{\circ}$ specular gloss and pencil hardness, and eco-friendly.

본 연구에서는 n-butyl acrylate (BA), methyl methacrylate (MMA), 2-hydroxypropyl methacrylate (HPMA) 및 acetoacetoxyethyl methacrylate(AAEM) 단량체를 부가 중합시켜 고형분이 75%인 아크릴수지를 합성하였다. 이때, 아크릴수지의 유리전이온도($T_g$)를 20, 30, $40^{\circ}C$로, 수산기가(OH value)를 60, 90, 120으로 변화시켰다. 그 결과, 아크릴수지의 점성도는 $T_g$와 수산기가가 증가할수록 증가하였다. 합성된 아크릴수지는 높은 가교밀도를 갖도록 설계되어 고탄력성과 고내구성을 유지하였다. 가교된 아크릴수지는 블록이소시아네이트(Desmodur BL-3175)와 경화 반응시켜 아크릴 우레탄 투명 도료를 제조하는데 사용되었다. 도료에 대하여 점성도, 접착성, 연필경도 및 $60^{\circ}$ 경면광택도 등의 측정을 통해 물리적 특성을 분석하였고, 아크릴 우레탄 투명 도료는 코일코팅용 상도 도료로서 적용되기 위하여 시편으로 제조되어 다양한 특성이 평가되었다. 제조된 도료는 접착력이 뛰어났고, $60^{\circ}$ 경면광택도와 연필경도에서 우수한 특성을 나타내었으며, 환경 친화적이었다.

Keywords

References

  1. Kim, J. Y., Yoon, S. M, Park, K., Yoon, S. K., Kil, I. S., Park, H. J. and Rhee, Y. W., "Investigation on Desorption Characteristics of VOCs Adsorbed on Used Activated Carbons Collected From Painting Process," Korean Chem. Eng. Res., 48(6), 752-756(2010).
  2. Moon, C. J. and Lee, J. H., "Use of Curdlan as Environmental Friendly Paint Additive," Korean Chem. Eng. Res., 41(5), 675-678(2003).
  3. Lee, H. J., Jang, S. H., Chang, S. M. and Kim, J. M., "Study on Polymerization Condition of Water-based Acrylic Adhesion," Korean Chem. Eng. Res., 48(5), 609-614(2010).
  4. Mahli, D. M., Steffenhagen, M. J., and Glass, J. E., "Spray Applications: Part V. Influence of High Solid Compositions on Coatings Sprayability," J. Coat. Technol. Res., 5(1), 33-43(2008). https://doi.org/10.1007/s11998-007-9067-3
  5. Thometzek, P., Freudenberg, U., Meier-Westhues, U. and Yonek, K., "Weather-stable Low-gloss Powder Coatings," J. Coat. Technol., 72(906), 75-79(2000). https://doi.org/10.1007/BF02698473
  6. Zhang, F., Zhu, H., Yang, W., Wu, Z., Qi, H., He, H., Fan, Z. and Shao, J., "$Al_2O_3/SiO_2$ Films Prepared by Electronbeam Evaporation as UV Antireflection Coatings on 4H-SiC," Appl. Surf. Sci., 254(10), 3045-3048(2008). https://doi.org/10.1016/j.apsusc.2007.10.052
  7. Roux, M., Delome, T., Laigle, Y., Chave, T. and Vial, F., "Waterborne Coatings in the Furniture Industry: Meeting Demands for Appearance and Performance," Surf. Coat., Int., 90(8), 365-372 (2007).
  8. Kim, B. S., Hong, M. G., Yoo, B. W., Lee, M. G., Lee, W. I. and Song, K. C., "Preparation of Waterborne Polyurethane-acrylic Hybrid Solutions from Different Types of Acrylate Monomers," Korean Chem. Eng. Res., 50(3), 410-416(2012). https://doi.org/10.9713/kcer.2012.50.3.410
  9. Fedrizzi, L., Deflorian, F., Boni, G., and Bonora, P., "EIS Study of Environmentally Friendly Coil Coating Performances," Prog. Org. Coat., 29(1-4), 89-96(1996). https://doi.org/10.1016/S0300-9440(96)00620-0
  10. Petit, H., Henry, N., Krebs, A., Uytterhoven, G. and Jong, F., "Ambient Cure High Solids Acrylic Resins for Automotive Refinish Clear Coat Applications," Prog. Org. Coat., 43(1-3), 41-49(2001). https://doi.org/10.1016/S0300-9440(01)00220-X
  11. Olsen, J. H., "Water-borne High-solids Exterior Wood Coatings," Surf. Coat. Int., 88(A8), 317-322(2005).
  12. Lange, J., Hult, A. and Manson, J. A., "Development of Properties During Cure of Epoxy and Acrylate Coating Materials," ACS symposium series, 648, 200-209(1996).
  13. Rector, F. D., Blount, W. W. and Leonard, D. R., "Applications for Acetoacetyl Chemistry in Thermoset Coatings," J. Coat. Technol., 61(771), 31-37(1989).
  14. Carretti, E. and Dei, L., "Physicochemical Characterization of Acrylic Polymeric Resins Coating Porous Materials of Artistic Interest," Prog. Org. Coat., 49(3), 282-289(2004). https://doi.org/10.1016/j.porgcoat.2003.10.011
  15. Slinckx, M., Henry N., Kerbs, A. and Uytterhoeven, G., "Highsolids Automotive Coatings," Prog. Org. Coat., 38(3), 163-173 (2000). https://doi.org/10.1016/S0300-9440(00)00089-8
  16. Diakoumakos, C. D., Qi, X., Jones, F. N. and Baghdachi, J., "Synthesis of Acrylic Resins for High-solids Coatings By Solution and Separation Polymerization," J. Coat. Technol., 72(908), 61-70(2000).
  17. Kubo, A., "High-solid Paint Formation by Lowering Molecular Weight Distribution of Resins in Coating Materials," Toso Kogaku, 38(8), 284-288(2003).
  18. Kim, D. W., Hwang, K. H., Jung, C. H., Wu, J. P. and Park, H. S., "The Preparation and Characteristics of High Solids Acrylic/ Polyisocyanate Coatings," Polym. Korea, 24(4), 520-528(2000).
  19. Kim, M. J., Min, K. B., Kim, S. H., Yoon, J. W., Kwak, S. J., Lee, J. H. and Oh, S. K., "The Effect of Water Resistance in the Primary Coating by Silane Coupling Agents and Amine Synergists," Proc. SPIE, 7135(2), (2008).
  20. Oldering, P. K. T. and Hayward, G., Resins for surface coatings, Volume II, SITA Technology, London(1987).
  21. Pouchert, C. J. and Behnke, J., The Aldrich Library of $^{13}C$ and $^{1}C$ FT-NMR Spectra, Aldrich Chemical, Milwaukee(1993).
  22. Jung, C. H., Jo, H. J., Shim, I. W., Park, H. S., Kim, S. J. and Kim, S. K., "Physical Properties of High-solid Coatings with 80% Solid Contents Acrylic Resins Containing Caprolactone Group and HMDI-trimer," J. Korean Oil Chem. Soc., 23(2), 110-114(2006).