Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Chemical Resistance Performance of Synthetic Rubber and Cement Based Injection Repair Materials Used in Underground Concrete Structures

지하 콘크리트 구조물에 적용되는 합성고무계 및 시멘트계 주입형 보수재료의 화학 저항성능평가

  • 김수연 (서울과학기술대학교 건설기술연구소) ;
  • 이정훈 ((주)BK방수방식연구소) ;
  • 송제영 ((주)BK방수방식연구소) ;
  • 김병일 (서울과학기술대학교 건축학부) ;
  • 오상근 (서울과학기술대학교 건축학부)
  • Received : 2017.07.25
  • Accepted : 2017.08.23
  • Published : 2017.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, by using the international standards ISO TS 16774, Part 2 Test method for chemical resistance as a quality control method of injection type repair material used for leakage crack of underground concrete structure, the performance requirement against of chemical environment of underground concrete structures for repair materials was tested. For this testing 3 types for each of the 2 classes of repair materials(synthetic rubber, cement), with a total of 9 types repair materials, were selected and examined. As a result, the test results showed that the smallest performance deterioration by the change in the mass was with the synthetic rubber(RG) type as opposed to the cement type system, showing that the synthetic rubber type had the strongest relative resistance to chemical exposure. Furthermore, it is necessary to investigate the material with high resistance to chemical substances and to examine the material which can increase resistance to sodium hydroxide and sodium chloride in cement system. These results can be used as a basic index for the selection of repair materials with the strongest resistance to chemical environment found in concrete structures. In addition, it is expected that the test results derived in this study can be used as reference data that can be reflected in the quality improvement of the maintenance material to be developed later.

본 연구에서는 지하 콘크리트 구조물의 누수 균열에 사용되는 주입형 누수보수재료의 품질관리 방안으로 규격화된 국제표준 ISO TS 16774, Part 2 Test method for chemical resistance를 이용하여 현재 우리나라 누수보수현장에서 사용하고 있는 주입형 누수보수재료 2계열(합성고무계, 시멘트계), 3종류 씩, 총 9 종류의 보수재료에 대한 지하 콘크리트 구조물이 처한 화학적 환경의 저항 안정성을 연구 검토하였다. 그 결과, 합성고무계는 RG-3를 제외하고, 산에 대한 저항력을 높일 수 있는 재료적 검토가 필요하고, 시멘트계는 수산화나트륨, 염화나트륨에 대한 저항을 높일 수 있는 재료적 검토의 필요성이 확인되었다. 이러한 결과는 콘크리트 구조물의 화학적 환경에서의 보수재료 선정 시 기본 지표로 사용가능 할 것으로 판단된다. 또한, 추후에 연구 개발 되는 보수재료의 품질 향상에 반영할 수 있는 기준 자료의 활용을 기대할 수 있다.

Keywords

References

  1. Water-Leakage Maintenance Technology and Case of Architecture as Structure, Korea Infrastructure Safety & Technology Corporation, Ohsang. S-K, Lee. J-Y, Part, G-B, Ohsnag. J-S.
  2. Underground Water Quality Management Division Trend, Department of Environment, (2012).
  3. Improvement plan for the installation of facilities to prevent groundwater pollution, National Institute of Andong University Jeong Gyu Chul, 2012 1st Half Water Technology Conference, (2012).
  4. https://www.water.or.kr My Water, K-Water
  5. Ministry of Environment (2012.02), 2012 Groundwater quality management policy direction, 3-8.
  6. ISO TR 16475 (2011), Guidelines for the repair of water-leakage cracks in concrete structures, International Organization for Standardization, 2nd Ed., Switzerland.
  7. Kim, S. Y., Oh, S. K., and Kim, B. l. (2016). Artificial - Crack - Behavior Test Evaluation of the Water-Leakage Repair Materials Used for the Repair of Water-Leakage Cracks in Concrete Structure, MDPI AG Appl. Sci. 2016, 6, 253; doi:10.3390/app6090253,Switzerland.
  8. KS F 4935 (2008), Sealer of injection type for water leakage maintenance of adhesive flexible rubber asphalt series, Korean agency for technology and standards [In Korea].
  9. ISO TS 16774, Part 2, Test method for chemical resistance.
  10. ACI Committee. Field Guide to Concrete Repair Application Procedures, Structural Crack Repair by Epoxy Injection; ACI Committee E706, ACI RAP Bulletin 1:Michigan, USA Cigy of Publication, Contry, 02.2010.