전기학회논문지P (The Transactions of the Korean Institute of Electrical Engineers P)

  • 제67권1호
  • /
  • Pages.33-36
  • /
  • 2018
  • /
  • 1229-800X(pISSN)
  • /
  • 2586-7792(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

태양광 모듈용 내오염성 필름의 열처리 온도에 따른 특성 분석

Characterization of Anti-pollution Film according to the Annealing Temperature for PV Module

  • Yoo, Seung-cheol (Dept. of Electrical Engineering, Hanbat National University) ;
  • Choi, WonSeok (Dept. of Electrical Engineering, Hanbat National University) ;
  • Lim, Yoonsik (Yeoju Institute of Technology) ;
  • Kim, Junghyun (Dept. of Advanced Materials Engineering, Hanbat National University)
  • 투고 : 2018.02.14
  • 심사 : 2018.02.22
  • 발행 : 2018.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this study is to improve the efficiency of anti-pollution film for PV module. The anti-pollution coating process was performed on a glass substrate, which is the same material as the glass substrate for the PV module. We coated the anti-pollution film on the glass substrate by spray coating. After coating process, annealing process was performed during 1 hour at $200^{\circ}C$, $300^{\circ}C$, and $400^{\circ}C$. And then we analyzed the surface characteristics according to the annealing temperature of the film. Annealing process can also improve the durability of the coated film. And then we analyzed the anti-pollution characteristics, particle size of anti-pollution film, light transmittance. The particle size of anti-pollution film was analyzed with FE-SEM. The light transmittance was analyzed with UV-Visible spectroscopy including integrating sphere.

키워드

참고문헌

  1. V. V. Tyagi, Nurul A. A. Rahim, N. A. Rahim, and Jeyraj A./L. Selvaraj, "Progress in solar PV technology: Research and achievement," Renew. Sust. Energ. Rev., vol. 20, pp. 443-461, 2013. https://doi.org/10.1016/j.rser.2012.09.028
  2. F. Cao, K. Chen, J. Zhang, X. Ye, J. Li, S. Zou, and X. Su, "Next-generation multi-crystalline silicon solar cells: Diamond-wire sawing, nano-texture and high efficiency," Sol. Energ. Mat. Sol. C., vol. 141, pp. 132-138, 2015. https://doi.org/10.1016/j.solmat.2015.05.030
  3. P. G. Jordan, "The Solar Labor Market - Efficiencies and Productivity," Solar Energy Markets, pp. 111-126, 2014.
  4. H. Jaeberlin and J. D. Graf, 1998, "Gradual Reduction of PV Generator Yield due to Pollution," 2nd World Conference on Photovoltaic Solar Energy Conversion, Vienna, Austria.
  5. Hyunil Kang, Seung Kwon Shin, Hyungchul Kim, Yonnsik Lim, Youngsik Yoo, Yeun-Ho Joung, Junghyun Kim, Won Seok Choi, "Characteristic Analysis of Functional Nano-coating Films Synthesized according to the Annealing Ambient and Fabrication of Anti-pollution PV Module", Trans. Korean Inst. Electr. Eng., vol. 64P, pp. 182-186, 2015.
  6. M. Wu, Y. N. Lin, H. Guo, T. Ma, and A. Hagfeldt, "Highly effective Pt/MoSi2 composite counter electrode catalyst for dye-sensitized solar cell," J. Power Sources, vol. 263, pp. 154, 2014. https://doi.org/10.1016/j.jpowsour.2014.04.029
  7. J. T. Park, J. H. Kim, and D. Lee, "Excellent anti-fogging dye-sensitized solar cells based on superhydrophilic nanoparticle coatings," Nanoscale, vol. 6, pp. 7362, 2014. https://doi.org/10.1039/C4NR00919C