DOI QR코드

DOI QR Code

도심지 복합시설 BIPV 모듈의 특성을 고려한 태양광발전시스템 어레이설계 실증 연구

An Experimental Study on the Array Design of BIPV System in Complex Facility of Downtown

  • 투고 : 2018.01.20
  • 심사 : 2018.02.19
  • 발행 : 2018.03.01

초록

The BIPV system must be designed to reflect the architectural and electrical characteristics simultaneously because it replaces the role of the exterior material of the building, which makes it difficult to design the BIPV. The thin film type BIPV module has an electrical characteristic that the open voltage is higher and the short circuit current is lower than that of the crystalline type BIPV module. However, there are many differences in the design of the array, the collector distribution board, and the inverter in the system configuration since the crystal type BIPV module has the opposite feature. In this study, a crystalline BIPV module and a thinfilm BIPV module were applied to actual buildings. As a result, the elements to be considered in designing BIPV system were derived, and the architectural and electrical characteristics were mutually analyzed.

키워드

참고문헌

  1. Yoon, J. H., Shin. W. C., Oh. M. H., and Park. J. H., "Effective BIPV Application Method for Reduction of Building Energy Consumption at High-rised Office Building," Architectural institute of Korea, Vol. 27, No. 8, pp. 333-342, 2011.
  2. Lim. J. W., "development of envelop using BIPV (Building Integrated Photovoltaic)," Architectural institute of Korea, Vol. 20, No. 2, pp. 169-176, 2004.
  3. Um. J. Y., Jang, H, I., Yoon. S. H., "Development of envelop using BIPV(Buil ding Integrated Photovoltaic)," Architectural institute of Korea, Vol. 29, No. 4, pp. 259-266, 2013.
  4. Lee. S. H., Song. J. H., and Jung. S. H., "Convergence Technology trend of BIPV & Building Materials," The Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 28, No. 1, pp. 35-42, 2014. https://doi.org/10.5207/JIEIE.2014.28.9.035
  5. Yoon, J. H. "Architectural Considerations of BIPV System," Korea Green Building Council, Vol. 5, No. 4, pp. 23-30, 2012.
  6. Hong, W .H., Kim. D. S., "Study on the Application Possibility of BIPV System through Analysis of Electric Power Loads and Exterior Design in an Office Building," Architectural institute of Korea, Vol. 22, No. 2, pp. 191-199, 2006.
  7. Lee. S. H., Song. J. H., and Jung. S. H., "Convergence Technology trend of BIPV & Building Materials," The Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 28, No. 1, pp. 35-42, 2014. https://doi.org/10.5207/JIEIE.2014.28.9.035
  8. Yoon, J. H., Kim. J. I., Lee. K. S., and Yoo. K. J., "Development of Building Integrated PV(BIPV) module for the replacement of commercial building envelope materials," The Ecological Society of Korea, Vol. 4, No. 3, pp. 113-119, 2004.