Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

High Temperature Ablation Behaviors of Multilayer Coated Stainless Steel

다층 코팅된 Stainless Steel의 고온 내삭마특성

  • Choi, Kwangsu (Department of Materials Science and Engineering, Hanbat National University) ;
  • Yang, Wonchul (Department of Materials Science and Engineering, Hanbat National University) ;
  • Kim, Yeong joo (Department of Materials Science and Engineering, Hanbat National University) ;
  • Park, Joon Sik (Department of Materials Science and Engineering, Hanbat National University) ;
  • Kim, Min Kyu (Department of Materials Science and Engineering, Hanbat National University)
  • 최광수 (한밭대학교 신소재공학과) ;
  • 양원철 (한밭대학교 신소재공학과) ;
  • 김영주 (한밭대학교 신소재공학과) ;
  • 박준식 (한밭대학교 신소재공학과) ;
  • 김민규 (한밭대학교 신소재공학과)
  • Received : 2017.12.21
  • Accepted : 2018.02.06
  • Published : 2018.03.27
Download PDF
⟨ Previous Next ⟩

Abstract

Stainless steel is being used in various industries such as automobile and aerospace for its cheap manufacturing cost and excellent mechanical properties. However, stainless steel failed to stably protect a specimen with a $Cr_2O_3$ protective layer at temperatures above $1000^{\circ}C$. Thus, improving the high temperature flame resistance of the specimen through additional surface coating was needed. In this study, multilayer coatings of YSZ and $Al_2O_3$ were performed on SUS 304 specimens using pack cementation coatings and thermal plasma spray. The multilayer coated specimen showed enhanced thermal properties due to the coated layers. The microstructures and phase stability are discussed together with flame conditions at $1350^{\circ}C$.

Keywords

References

  1. F. J. Perez, M. J. Cristobal, M. P. Hierro, F. Pedraza, Surf. Coat. Technol., 120, 442 (1999).
  2. F. J. Perez, M. P. Hierro, F. Pedraza, C. Homez, M. C. Carpintero, Surf. Coat. Technol., 120, 151 (1999).
  3. F. Riffard, H. Buscail, E. Caudron, R. Cueff, C. Issartel, S. Perrier, Appl. Sur. Sci., 252, 3697 (2006). https://doi.org/10.1016/j.apsusc.2005.05.054
  4. S. Sharafi, M. R. Farhang, Surf. Coat. Technol., 200, 5048 (2006).
  5. N. V. Bangaru, R. C. Krutenat, J. Vac. Sci. Technol. B, 2, 806 (1984).
  6. M. Zandrahimi, J. Vatandoost, H. Ebrahimifar, J. Mater. Eng. Perform., 21, 2074 (2012). https://doi.org/10.1007/s11665-012-0135-1
  7. Kevin L. Smith, A Kutyan. Shaghik A. Abolian, Tom F. Krenek, Stephani A. Salas, Vilupanur A. Ravi, NACE International., March, Orlando, Florida (2013).
  8. M. Chen, W. Li, M. Shen, S. Zhu, F. Wang, Corros. Sci., 82, 316 (2014).
  9. P-H. Gao, S-T. Cao, J-P. Li, Z. Yang, Y-C. Guo, J. Alloys compd., 684, 188 (2016). https://doi.org/10.1016/j.jallcom.2016.05.181
  10. B. Bernard, A. Quet, L. Bianchi, A. Joulia, A. Malie, V. Schick, B. Remy, Surf. Coat. Technol., 318, 122 (2017). https://doi.org/10.1016/j.surfcoat.2016.06.010
  11. Y. I. Son, C. H. Chung, R. R. Gowkanapalli, C. H. Moon, J. S. Park, Met. Mater. Int., 21, 1 (2015). https://doi.org/10.1007/s12540-015-1001-0
  12. M. Qiao, C. Zhou. Surf, Coat. Technol., 206, 2899 (2012). https://doi.org/10.1016/j.surfcoat.2011.12.019
  13. K. Kothari, R. Radhakrishnan, N. M. Werely, Prog. Aerosp. Sci., 55, 1 (2012). https://doi.org/10.1016/j.paerosci.2012.04.001
  14. J. S. Park, J. M. Kim, H. Y. Kim, S. Yi, J. H. Perepezko, Met. Mater. Int., 14, 1 (2008). https://doi.org/10.3365/met.mat.2008.02.001
  15. J. Cheng, S. Yi and J. S. Park, Int. J. Refract. Met. Hard Mater., 41, 103 (2013). https://doi.org/10.1016/j.ijrmhm.2013.02.010
  16. J. S. Park, J. M. Kim, H. Y. Kim, J. S. Lee, I. H. Oh and C. S. Kang, Mater. Trans., 49, 1048 (2008). https://doi.org/10.2320/matertrans.MC200709
  17. J. S. Park, J. M. Kim, S. H. Cho, Y. I. Son and D. Kim, Mater. Trans., 54, 1517 (2013). https://doi.org/10.2320/matertrans.M2013065
  18. S-Y. Lee, O-H. Kim, B. Yeh and C-O. Park, Korean J. Mater. Res., 5, 835 (1995).
  19. Y. I. Son and J. S. Park, Trends in Metals & Mater. Eng., 28, 10 (2015).
  20. D. W. Parker, Materials & design., 13, 345 (1992). https://doi.org/10.1016/0261-3069(92)90005-3
  21. R. Ghasemi and H. Vakilifard, Ceram. Int., 43, 8556 (2017). https://doi.org/10.1016/j.ceramint.2017.03.074
  22. M. R. Loghman-Estarki, R. S. Razvi, H. Edris, M. Pourbafrany, H. Jamali and R. Ghasemi, Ceram. Int., 40, 1405 (2014). https://doi.org/10.1016/j.ceramint.2013.07.023
  23. P. Sokolowski, S. Bjorklund, R. Musalek, R. T. Candidato Jr, L. Pawlowski, B. Nait-Ali and D. Smith, Surf. Coat. Technol., 318, 28 (2017). https://doi.org/10.1016/j.surfcoat.2017.02.054