융합정보논문지 (Journal of Convergence for Information Technology)

중소기업융합학회 (Convergence Society for SMB)
권호 표지
DOI QR코드

DOI QR Code

양방향 통신 장치 제작 및 분석

The fabrication and the analysis on a communication device for bilateral

  • 유일현 (세명대학교 정보통신학부)
  • You, Il-hyun (Department of Information Communication Technology, Semyung University)
  • 투고 : 2018.02.13
  • 심사 : 2018.04.20
  • 발행 : 2018.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

양방향 통신 장치를 설계 및 개발하기 위한 조건을 구하기 위해 $36^{\circ}$ $LiTaO_3$기판 위에 전극을 형성시켰으며, 전극재료로는 Al-Cu(W 30%)를 이용하였다. 이 방법으로 3가지 서로 다른 샘플 전극을 제작했으며, 주파수 특성, 리플특성 및 대역범위가 유사한 두 전극을 선택 후, 직렬로 연결하여 양방향 통신 장치를 만들었다. 직렬 연결한 양방향 장치 특성은 다른 샘플 전극보다 좋은 결과를 얻었으며, 주파수는 대략 190.3MHz로 측정되었으며, 반사기와 전극 폭을 각각 $1{\lambda}/4$, $1{\lambda}/12$로 하였다. 이 결과들을 바탕으로 향후. 다중 채널을 이용한 통신 소자 개발은 물론 듀플렉스 필터 제작에도 도움을 줄 것을 희망한다.

We have studied the optimal conditions for design and development on the communication device for a bilateral, and it's electrodes for transmitting electric signal are constructed on the $36^{\circ}$ rotated $LiTaO_3$ substrate by evaporating Al-Cu(W 30%) alloy. At first, we manufactured three kind of samples using this method, and selected two samples as similar with frequency, ripple and passband characteristics, and then we connect two samples by series in order to make bilateral devices. As results, we obtained that the electrode structure has better characteristics then the others, when it's width of reflector and electrode are $1{\lambda}/4$, $1{\lambda}/12$ respectively, and it's frequency is approximately 190.3MHz. Near future, I hope to help the manufacture for communication devices for the multi-channel and the duplex filter.

키워드

참고문헌

  1. C. Y. An & H. G. Ryu. (2017). Synchronization and performance evaluation of MINO/F-OFDM system for 5G mobile communications. The Journal of korean institute of communications and information sciences, 42(1), 31-38. DOI : 10.7840/KICS.2017.42.1.31
  2. Y. J. Hong, S. J. Lim & W. B. Lee. (2017). A study on lighting system for LED color temperature control using wireless communication and smart phone. Journal of the korean academia-industrial cooperation society, 18(11), 721-77. DOI : 10.5762/KAIS.2017.18.11.72
  3. C. N. Lim. (2017). Electrochemical properties of $FeS_2$ thin film electrodes for thermal batteries. Journal of korean institute of electrical and electronic material engineer, 30(5), 318-324. DOI : 10.4313/KEM.2017.30.5.318
  4. J. H. Whang. (2017). Electric circuits. Seoul : Hongreung printing Co, Ltd.
  5. Y. S. Lee & Y. C. Chung. (2011). Design and fabrication of triple coupler ring resonator filter. Korean Journal of optics and photonics, 22(1), 40-45. DOI : 10.3807/KJOP.2011.22.1.040
  6. J. O. Park & W. K. Jang. (2012). Design and fabrication of dielectric duplexer and band pass filters for K-PCS and W-CDMA dual-band. Journal. of korean institute of electrical and electronic material engineer, 25(12), 949-954. DOI : 10.4313/JKEM..2012.25.12.949
  7. T. S. Park, D. R. Kwak, I. K. Park, M. S. Kim & S. .S. Lee. (2014). Thickness measurement of Ni thin film using dispersion characteristics od Surface Acoustic Wave. The Journal of the korean society for nondestructive testing. 34(2), 171-175. DOI : 10.7779/JKSNT.2014.34.2.171
  8. J. I. Lee, T. H. Lee & K. Y. Jhang. (2009). Evaluation of surface fatigue degradation using acoustics non-linearity of surface wave. The Journal of the korean society for nondestructive testing. 29(5), 415-420. DOI : 10.7779/JKSNT.2009.29.5.415
  9. X. Luo, A. Shen & R. Mao. (2015). A double bi-quard filter with wide band resonance suppression for servo systems. Journal of power electronics, 15(5), 1409-14204. DOI : 10.6113/JPE.2015.15.5.1409
  10. C. B. Chvets, P. G. Ivanov, V. M. Maka & V. S. Orlov. (1999). Design of SAW filters on langasite. In Ultrasonics Symposium, 1999. Proceedings. 1999 IEEE (Vol. 1, pp. 295-299). IEEE. DOI : 10.1109/ultsym.1999.849405
  11. G. H. Heo, J. Y. Jeon & S. G. Jeon. (2015). Band pass filter based artificial filter bank for structural health monitoring. Korean society noise vibration engineering, 25(12), 843-855. DOI : 10.5050/KSNVE..2015.25..12.843
  12. H. Yatsuda & K. Yamanouchi. (2000). Automatic computer-aided design of SAW filters using slanted finger interdigital transducers. IEEE transactions on ultrasonics, ferroelectrics, and frequency control, 47(1), 140-147. DOI : 10.1109/58.818756
  13. T. Kim, S. U. Cho, C. S. Park, H. G. Lee, D. I. Kim & M. Y. Jeong. (2016). A Study on Fluorescence Imaging System Characteristics depending on Tilting of Band Pass Filter. Journal of the Microelectronics and Packaging Society, 23(2), 85-89. DOI : 10.6117/KMEPS.2016.23.2.085
  14. G. W. Kim et al.(2012). Electrochemical properties of $Al^{3+}$ and $Y^{3\ast}$ co-doped $SnO_2$ transparent conducting films. Journal of korean institute of electrical and electronic material engineer, 25(10), 305-310. DOI : 10.4313/JKEM.2012.25.10.305
  15. J. H. Jang & G. S. Sim.(2015). Intelligent mobile surveillance system based on wireless communication. Journal of the korea contents association, 25(10), 305-310. DOI : 10.4313/JKEM.2012.25.10.305