Journal of the Korean Applied Science and Technology (한국응용과학기술학회지)

The Korean Society of Applied Science and Technology (한국응용과학기술학회)
권호 표지
DOI QR코드

DOI QR Code

The Effects of the Content of Hydroxyethyl Methacrylate in Fluorine-containing Acrylate Copolymers on Physical Properties

불소함유 아크릴계공중합체에서 히드록시에틸메타크릴레이트 함량에 따른 물리적 특성 변화

  • Kim, KiSang (Department of Biochemical Engineering, College of Engineering Gangneungwonju National University) ;
  • Shim, Sang-Yeon (Department of Biochemical Engineering, College of Engineering Gangneungwonju National University)
  • 김기상 (강릉원주대학교 공과대학 생명화학공학과) ;
  • 심상연 (강릉원주대학교 공과대학 생명화학공학과)
  • Received : 2018.05.08
  • Accepted : 2018.06.22
  • Published : 2018.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The acrylate copolymer having good coating, water-repellent and adhesion properties was designed and prepared. We prepared copolymers with high yield of > 95% using methyl methacrylate(MMA), 2,2,2-trifluoroethyl acrylate (FMA) and 2-hydroxyethyl methacrylate monomers(HEMA) by either bulk or emulsion polymerization techniques. The $^1H-NMR$ spectrum was used to identify chemical structure and DSC and DMA analysis were conducted. As a result, the glass transition temperature decreased by $3^{\circ}C$ as FMA content increased from 5% to 10%, and decreased by $2{\sim}8^{\circ}C$ when HEMA content increased from 5 % to 10 %. The physical properties were measured using Instron and TGA. As FMA or HEMA content increased by 10%, tensile strength decreased from 29 MPa to 22 MPa and Td decreased from $200^{\circ}C$ to $180^{\circ}C$ in both bulk and emulsion. The contact angle relatively decreased as hydrophilic HEMA content increased.

코팅, 발수 및 접착특성이 우수한 불소함유 아크릴계 공중합체를 설계, 제조하였다. 공중합체용 모노머로 methyl methacrylate(MMA), 2,2,2-trifluoroethyl acrylate(FMA) 그리고 2-hydroxyethyl methacrylate(HEMA)를 사용하여 괴상 중합 및 유화 중합으로 반응하여 > 95 %이상 고수율로 공중합체를 제조하였다. $^1H-NMR$로 화학구조를 확인하였고 DSC와 DMA로 물성분석을 한 결과, FMA의 함량이 5 %에서 10 %로 증가함에 따라 유리전이온도는 $3^{\circ}C$ 감소하였으며 HEMA의 경우에는 감소폭이 $2{\sim}8^{\circ}C$로 나타났다. Instron 및 TGA를 이용한 분석에서는 FMA 혹은 HEMA 함량이 10 % 증가함에 따라 괴상 및 유화 중합체 모두에서 인장강도는 29 MPa에서 22 MPa로 감소하였고 Td는 $200^{\circ}C$에서 $180^{\circ}C$로 감소하는 경향을 나타내었다. 접촉각은 친수성인 HEMA의 함량이 증가함에 따라 상대적으로 감소하였다.

Keywords

References

  1. R. Jain, R. Pitchumani, "Fabrication and characterization of zinc-based superhydrophobic coatings", Surface and Coating Technology, Vol. 337, pp. 223-231, (2018). https://doi.org/10.1016/j.surfcoat.2018.01.014
  2. X. Cui, G. Zhu, Y. Pan, Q. Shao, C. Zhao, M. Dong, Y. Zhang, Z. Guo, "Polydimethylsiloxane-titania nanocomposite coating: Fabrication and corrosion resistance", Polymer, Vol.138, pp. 203-210, (2018). https://doi.org/10.1016/j.polymer.2018.01.063
  3. J. Zhao, L. Wu, C. Zhan, Q. Shao, Z. Guo, L. Zhang, "Overview of polymer nanocomposites: Computer simulation understanding of physical properties", Polymer, Vol. 133, pp. 272-280, (2017). https://doi.org/10.1016/j.polymer.2017.10.035
  4. Sharmin E, AhmadS,Zafar F. Renewable resources in corrosion resistance, Chap.20, p. 449-472,InTech publishers,(2012).
  5. M. Kathalewar, A. Sabnis, "Epoxy resin from cardanol as partial replacement of bisphenol-A- based epoxy for coating application", J. of Coatings Technology and Research, Vol. 11, No 4, pp. 601-618, (2014). https://doi.org/10.1007/s11998-014-9570-2
  6. C. Askham, "Environmental product development; replacement of an epoxy-based coating by a polyester-based coating", the International J. of Life Cycle Assessment, Vol. 16, pp. 819-825, (2011). https://doi.org/10.1007/s11367-011-0302-x
  7. P. Vijayan, A. Tanvir, Y. H.E. Gawady, M. A. Maadeed, "Cellulose nanofibers to assist the release of healing agents in epoxy coatings", Progress in Organic Coatings, Vol. 112, pp. 127-132, (2017). https://doi.org/10.1016/j.porgcoat.2017.07.008
  8. D.Y. Perera, "On adhesion and stress in organic coatings", Progress in Organic Coatings, Vol. 28, pp. 21-23, (1996). https://doi.org/10.1016/0300-9440(95)00585-4
  9. M. L. Picchio, M. C. G. Passeggi, M. J. Barandiaran, L. M. Gugliotta, R. J. Minari, "Waterborne acrylic-casein latexes as eco-friendly binders for coatings", Progress in Organic Coatings, Vol. 88, pp. 8-16, (2015). https://doi.org/10.1016/j.porgcoat.2015.06.012
  10. D. Song, Z. Yin, F. Liu, H. Wan, J. Gao, D. Zhang, X. Li, "Effect of carbon nanotubes on the corrosion resistance of water-borne acrylic coatings", Progress in Organic Coatings, Vol. 110, pp. 182-186, (2017). https://doi.org/10.1016/j.porgcoat.2017.04.043
  11. M. F. Montemor, "Functional and smart coatings for corrosion protection: a review of recent advances", Surface&Coatings Technology, Vol. 258, pp. 17-37, (2014). https://doi.org/10.1016/j.surfcoat.2014.06.031
  12. M. Bethencourt, F. J. Botana, M. J. Cano, R.M. Osuna, M. Marcos, "Lifetime prediction of waterborne acrylic paints with the AC-DC-AC method", Progress in Organic Coatings, Vol. 49, pp. 275-281, (2004). https://doi.org/10.1016/j.porgcoat.2003.10.009
  13. M. Li, W. Liu, Q. Zhang, S. Zhu, "Mechanical force sensitive acrylic latex coating", ACS Appl. Mater. Interfaces, Vol. 9, No 17, pp. 15156-15163, (2017). https://doi.org/10.1021/acsami.7b04154
  14. A. Cataldi, C. E. Corcione, M. Frigione, A. Pegoretti, "Photocurable resin/nanocellulose composite coatings for wood protection", Progress in Organic Coatings, Vol.106, pp. 128-136, (2017). https://doi.org/10.1016/j.porgcoat.2017.01.019
  15. F. A. Rueggeberg, "State of the art: Dental photocuring- A review", Dental Materials, Vol. 27, No 1, pp. 39-52, (2011). https://doi.org/10.1016/j.dental.2010.10.021
  16. H. Bahria, Y. Erbil, "UV technology for use in textile dyeing and printing: Photocured applications", Dyes and Pigments, Vol. 134, pp. 442-447, (2016). https://doi.org/10.1016/j.dyepig.2016.07.042
  17. P. Kotlink, K. Doubravova, J. Horalek, L. Kubac, J. Akrman, "Acrylic copolymer coatings for protection against UV rays", J. of Cultural Heritage, Vol. 15, No 1, pp. 44-48, (2014). https://doi.org/10.1016/j.culher.2013.01.002
  18. M. Sangermano, D. Foix, G. Kortaberria, M. Messori, "Multifunctional antistatic and scratch resistant UV-cured acrylic coatings", Progress in Organic Coatings, Vol. 76, pp. 1191-1196, (2013). https://doi.org/10.1016/j.porgcoat.2013.03.030
  19. F. Yang, L. Zhu. D. Han, R. Cao, W. Li, Y. Chen, X. Wang, L. Ning, "Preparation and failure behavior of fluorine-containg acrylic polyurethane coating", Progress in Organic Coatings, Vol. 90, pp. 455-462, (2016). https://doi.org/10.1016/j.porgcoat.2015.11.009
  20. J. Q. Huang, W. D. Meng, F. L Qing, "Synthesis and repellent properties of vinylidene fluoride-containing polyacrylates", J. of Fluorine Chemistry, Vol. 128, pp. 1469-1477, (2007). https://doi.org/10.1016/j.jfluchem.2007.08.005