DOI QR코드

DOI QR Code

Logistical Simulation for On-site Concrete Waste Management in Decommissioning

  • Lee, Eui-Taek (KEPCO International Nuclear Graduate School) ;
  • Kessel, David S. (KEPCO International Nuclear Graduate School) ;
  • Kim, Chang-Lak (KEPCO International Nuclear Graduate School)
  • 투고 : 2019.09.18
  • 심사 : 2019.12.17
  • 발행 : 2019.12.30

초록

Large amounts of concrete waste are likely to arise from the decommissioning of a Kori-1 nuclear power plant. Several studies have been conducted on decommissioning concrete waste in recent decades, however, they have been limited to contaminated concrete issues or were small pilot-scale experiments. This study constructed two industrial-scale models of on-site concrete waste management for clean as well as contaminated concrete. To evaluate the performance of both the models, simulations were conducted using the Flexsim software. The concrete particle size distribution of Kori-1 and concrete processor properties based on widely used construction equipment were used as sources of input data for the simulations. It was observed that it may take over two years to complete the on-site concrete management processes owing to the performance of existing processors. In addition, it was demonstrated that it is essential to identify bottlenecks in the system and enhance the performance of the relevant processors to avoid delays of the decommissioning schedule. Our results suggest that this novel approach can contribute to developing schedules or expediting delayed activities in the Kori-1 decommissioning project.

키워드

참고문헌

  1. S. Saishu, N. Ogawa, T. Ishikura, T. Hirayama, and K. Ishigure, "Development of Decommissioning Technology for Nuclear Power Plants in NUPEC", Accessed June 12, 2019, Available from: http://www.irpa.net/irpa10/cdrom/00456.pdf
  2. I. Binkhorst and H. Cornelissen, "Technology for Reuse of Contaminated Concrete Constituents", IAEATECDOC-1022, International Atomic Energy Agency, Vienna, 1998.
  3. B.Y. Min, J.W. Park, W.H. Choi, and K.W. Lee, "Separation of Radionuclide from Dismantled Concrete Waste", J. Korean Rudioact. Waste Soc., 7(2), 79-86 (2009).
  4. Ministry of Trade, Industry and Energy, June 16 2017, "Press release: The Ceremony for Permanant Shutdown of Kori-1 Nuclear Power Plant", Accessed June 17, 2019, Available from: http://www.motie.go.kr/motie/ne/presse/press2/bbs/bbsView.do?bbs_seq_n=159407& bbs_cd_n=81curentPage=1&search_key_n=title_v&cate_n=&dept_v=&search_val_v=고리1호기
  5. J.Y. Yoon and Y.H. Hwang, "Study on Activation Evaluation of the Kori Unit 1 Bioshield Concrete", in Proc. of the 2019 spring conference of Korean Radioact. Waste Soc., Busan, 2019.
  6. K.M. Lee, J.H. Kim, and S.H. Kang, "Preliminary Evaluation of Decommissioning Wastes for the First Commercial Nuclear Power Reactor in South Korea", International Journal of Nuclear and Quantum Engineering, 11(8), 615-621 (2017).
  7. Korea Hydro and Nuclear Power Company, "Lesson Learned of Kori Unit 2 Nuclear Power Plant Construction", KHNP, 1981.
  8. OECD, "Recycling and Reuse of Materials Arising from the Decommissioning of Nuclear Facilities", NEA No. 7310, OECD/NEA Publishing, Paris, 2017.
  9. Nuclear Safety and Security Commission, Regulations on the Classification of Radioactive Waste and Self-Disposal, NSSC Notice No. 2017-65, 2017.
  10. G. Dottavio, M.F. Andrade, F. Renard, V. Cheutet, A.L. Ladier, S. Vercraene, P. Hoang, S. Briet, R. Dachicourt, and Y. Baizet, "Logistical Optimization of Nuclear Waste Flows During Decommissioning", International J. Environ. Ecol. Eng., 10(10), 988-993 (2016).
  11. FlexSim Software Products, Inc., Oct. 10 2018, "Value Stream Mapping + Simulation White Paper", Accessed June 17, 2019, Available from: https://www.flexsim.com/ty/vsm-simulation-white-paper-download/
  12. C.W. Alexander, "Discrete Event Simulation for Batch Processing", in 2006 Winter Simulation Conference, Washington, D.C., 2016.
  13. V. Bechard and N. Cote, "Simulation of Mixed Discrete and Continuous Systems: An Iron Ore Terminal Example", Proc. of the 2013 Winter Simulation Conference, Washington, D.C., 2013.
  14. M. Beaverstock, A. Greenwood, and W. Nordgren, "Applied Simulation: Modeling and Analysis Using Flexsim, 5th Edition", Seoul, Korea, Choa pulisher, 2018, 124-402.
  15. Construction Research Center, "Part 1. Civil Works", in 2014 Standard of Construction Estimates, Seoul, Korea, Construction Research Center, 2014, 4-1077.
  16. J. Helala, M. Maantila, J. Montonen, J. Sillanpaa, P. Jarvinen, T. Jokinen, and S. Kivikunnas, "Developing Simulation-Based Decision Support Systems for Customer-Driven Manufacturing Operation Planning", Proc. 2010 Winter Simulation Conference, Washington, D.C., 2010.
  17. R. Thompson and S. McCann, "The Application of Simulation Modelling in Nuclear Decommissioning", in WM2010 Conference, Phoenix, AZ, 2010.