DOI QR코드

DOI QR Code

이산 요소법을 이용한 골재 입자의 혼합 및 배출 시 골재 거동 및 강판 마모에 관한 연구

Discrete Element Method for Defining the Dynamic Behavior and Abrasion of Gravel in Mixer Trucks during Mixing and Discharging

  • 유승훈 (현대자동차 연구개발본부) ;
  • 우호길 (충남대학교 공과대학 기계공학부)
  • Ryu, Seung-Hun (Automotive R&D Division Hyundai Motor Group.) ;
  • Woo, Ho-Kil (Division of Mechanical Engineering, ChungNam Univ.)
  • 투고 : 2020.09.09
  • 심사 : 2020.10.12
  • 발행 : 2020.12.31

초록

Ready-mixed concrete is unconsolidated concrete typically transported to construction sites by using mixer trucks. A proper rotation of concrete is necessary to prevent its solidification in mixer trucks during transport: in accordance with the manufacturing method and quality inspection prescribed in KSF4009, this movement is maintained after the manufacturing of concrete in professional production plants and the addition of water, solid materials, and admixtures. Unfortunately, mixer truck parts wear out over long periods of time. In order to improve the wear resistance of the main part of mixer trucks, we used a steel plate with good wear resistance or partially added a reinforcement plate. In this study, we first tested the properties of concrete (as required for the DEM), and then carried out mixing and discharge simulations to define the actual operating conditions of mixer trucks. For each condition, we calculated the amount and location of wear. The reliability of our results was finally verified by comparing them with the measurement values. Overall, this study provided basic data for an optimal design of mixer trucks: one that would reduce the vehicles' weight and production costs.

키워드

참고문헌

  1. Tan, Y., Deng, R., Zhang, H., and Jiang, S., "Study of mixing and discharging of dry particles in a truck mixer," Particulate Science and Technology, Vol. 38, No. 3, pp. 271-285, 2020. https://doi.org/10.1080/02726351.2018.1536091
  2. Deng, R., Tan, Y., Zhang, H., Xiao, X., and Jiang, S., "Experimental and DEM studies on the transition of axial segregation in a truck mixer," Powder technology, Vol. 314, pp. 148-163, Jun. 2017. https://doi.org/10.1016/j.powtec.2016.08.013
  3. Tian, Z., Yu, H., and Han, C., "Quantitative Analysis of Discharging Speed of a Horizontally Rotating Drum with Internal Baffles by Using DEM Simulation," MS&E, Vol. 790, No. 1, p. 012043, 2020.
  4. Sato, A., Kano, J., and Saito, F., "Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation," Adv. Powder technology, Vol. 21, No. 2, pp. 212-216, 2010. https://doi.org/10.1016/j.apt.2010.01.005
  5. Mazanec, O., Lowke, D., and Schiebl, P., "Mixing of high performance concrete: effect of concrete composition and mixing intensity on mixing time," Materials and structures, Vol. 43, No. 3, pp. 357-365, 2010. https://doi.org/10.1617/s11527-009-9494-y
  6. Remond, S. and Pizette, P., "A DEM hard-core soft-shell model for the simulation of concrete flow," Cement and concrete research, Vol. 58, pp. 169-178, 2014. https://doi.org/10.1016/j.cemconres.2014.01.022
  7. Li, Z., Cao, G., and Tan, Y., "Prediction of time-dependent flow behaviors of fresh concrete," Construction and Building Materials, Vol. 125, pp. 510-519, 2016. https://doi.org/10.1016/j.conbuildmat.2016.08.049
  8. Xiao, X., "Numerical Investigation on the Effect of the Particle Feeding Order on the Degree of Mixing Using DEM," Procedia engineering, Vol. 102, pp. 1850-1856, 2015. https://doi.org/10.1016/j.proeng.2015.01.323
  9. Lee, S. Yang, C., Park, J., "Validation and experiments of friction coefficient for discrete element method," in Proceedings of the KEPA Spring Conference, pp.3346-3347, 2016.
  10. Hertz, H., On the contact of elastic solids, J. Reine und Angew. Math., Vol. 92, pp. 156-171, 1982.
  11. Mindlin, R. D., Compliance of Elastic Bodies in Contact, in The Collected Papers of Raymond D. Mindlin Volume I, New York, NY: Springer New York, pp. 197-206, 1989
  12. Mindlin R. D. and Deresiewicz H., Elastic Spheres in Contact Under Varying Oblique Forces, in The Collected Papers of Raymond D. Mindlin Volume I, New York, NY: Springer New York, pp. 269-286, 1989,
  13. Cundall, P. and Strack, O., "A discrete numerical model for granular assemblies," Geotechnique, Vol. 29, No. 1, pp. 47-65, 1979. https://doi.org/10.1680/geot.1979.29.1.47
  14. Johnson, K. L. and Kendall, K. and Robert, K. A. D., "Surface energy and the contact of elastic solids," Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, Vol. 324, No. 1558, pp. 301-313, 1971.
  15. Lyu, J. and Park, J., "Analysis of Particle Packing Process by Contact Model in Discrete Element Method," Journal of the Korean Society of Manufacturing Process Engineers,, Vol. 18, No. 3, pp. 59-65, 2019.
  16. Xiao, X. and Tan, Y. and Zhang, H. and Jiang, S. and Wang, J. and Deng, R. and Cao, G. and Wu, B., "Numerical investigation on the effect of the particle feeding order on the degree of mixing using DEM," Procedia Engineering, Vol. 102, pp. 1850-1856, 2015. https://doi.org/10.1016/j.proeng.2015.01.323

피인용 문헌

  1. Additive Manufacturing Based Design of Metal Continuous Flow Reactor of Inner Micro Structure for Continuous Mixing and Reaction of Chemical Solvents vol.38, pp.9, 2020, https://doi.org/10.7736/jkspe.021.060