한국수소및신에너지학회논문집 (Transactions of the Korean hydrogen and new energy society)

  • 제31권1호
  • /
  • Pages.49-56
  • /
  • 2020
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

표면처리 탄소섬유가 PEMFC용 탄소/에폭시 복합재료 분리판의 기계적 강도에 미치는 영향

Effect of Surface-Modified Carbon Fiber on the Mechanical Properties of Carbon/Epoxy Composite for Bipolar Plate of PEMFC

  • 이홍기 (우석대학교 수소연료전지 부품 및 응용기술 지역혁신센터) ;
  • 한경식 (우석대학교 생명과학과)
  • LEE, HONGKI (Hydrogen Fuel Cell Parts and Applied Technology RIC, Woosuk University) ;
  • HAN, KYEONGSIK (Department of Life Science, Woosuk University)
  • 투고 : 2019.12.23
  • 심사 : 2020.02.28
  • 발행 : 2020.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Epoxy/carbon composite was used to prepare a bipolar plate for polymer electrolyte membrane fuel cell (PEMFC). Phenol novolac-type epoxy and diglycidyl ether of bisphenol A (DGEBA)-type epoxy mixture was used as a matrix and graphite powder, carbon fiber (CF) and graphite fiber (GF) were used as carbon materials. In order to improve the mechanical properties of the bipolar plate, surface-modified CF was incorporated into the epoxy/carbon composite. To determine the cure temperature of the epoxy mixture, differential scanning calorimetry (DSC) analysis was performed and the data were introduced to Kissinger equation in order to get reaction activation energy and pre-exponential factor. Tensile and flexural strength was obtained by using universal testing machine (UTM). The surface morphology of the fractured specimen and the interfacial morphology between epoxy matrix and CF or GF were observed by a scanning electron microscopy (SEM).

키워드

참고문헌

  1. F. A. de Bruijn, V. A. T. Dam, and G. J. M. Janssen, "Review: durability and degradation issues of PEM fuel cell components", Fuel Cells, Vol. 8, No. 1, 2008, pp. 3, doi: https://doi.org/10.1002/fuce.200700053.
  2. A. Garsuch, D. A. Stevens, R. J. Sanderson, S. Wang, R. T. Atanasoski, S. Hendricks, M. K. Debe, and J. R. Dahna, "Alternative catalyst supports deposited on nanostructured thin films for proton exchange membrane fuel cells", J. Electrochem. Soc., Vol. 157, No. 2, 2010, pp. B187, doi: https://doi.org/10.1149/1.3261855.
  3. S. R. Dhakate, R. B. Mathur, B. K. Kakati, and T. L. Dhami, "Properties of graphite-composite bipolar plate prepared by compression molding technique for PEM fuel cell", Int. J. Hydrogen Energy, Vol. 32, No. 17, 2007, pp. 4537-4543, doi: https://doi.org/10.1016/j.ijhydene.2007.02.017.
  4. A. R. Kim, C. J. Park, M. Vinothkannan, and D. J. Yoo, "Sulfonated poly ether sulfone/heteropoly acid composite membranes as electrolytes for the improved power generation of proton exchange membrane fuel cells", Composites Part B: Engineering, Vol. 155, 2018, pp. 272-281, doi: https://doi.org/10.1016/j.compositesb.2018.08.016.
  5. R. Arukula, M. Vinothkannan, A. R. Kim, and D. J. Yoo, "Cumulative effect of bimetallic alloy, conductive polymer and graphene toward electrooxidation of methanol: an efficient anode catalyst for direct methanol fuel cells", J. Alloys. Compd., Vol. 771, 2019, pp. 477-488, doi: https://doi.org/10.1016/j.jallcom.2018.08.303.
  6. K. Y. Ahn, C. N. Yang, and S. Lee, "A study on electrochemical characteristics of MEA with nafion ionomer content in catalyst layer for PEMFC", Trans. of the Korean Hydrogen and New Energy Society, Vol. 21, No. 6, 2010, pp. 540-546.
  7. C. He, S. Desai, G. Brown, and S. Bollepalli, "PEM fuel cell catalysts: cost, performance, and durability", Electrochem. Soc. Interface, Vol. 14, No. 3, 2005, pp. 41-44. Retrieved from https://www.electrochem.org/dl/interface/fal/fal05/IF8-05_Pg41-44.pdf.
  8. K. W. Park, and K. S. Seol, "Nb-$TiO_2$ supported Pt cathode catalyst for polymer electrolyte membrane fuel cells", Electrochem. Commun., Vol. 9, No. 9, 2007, pp. 2256-2260, doi: https://doi.org/10.1016/j.elecom.2007.06.027.
  9. S. R. Dhakatea, S. Sharma, and R. B. Mathura, "A low-density graphite-polymer composite as a bipolar plate for proton exchange membrane fuel cells", Carbon Letters, Vol. 14, No. 1, 2013, pp. 40-44, doi: http://dx.doi.org/10.5714/CL.2012.14.1.040.
  10. H. Tsuchiya and O. Kobayashi, "Mass production cost of PEM fuel cell by learning curve", Int. J. Hydrogen Energy, Vol. 29, No. 10, 2004, pp. 985-990, doi: https://doi.org/10.1016/j.ijhydene.2003.10.011.
  11. S. Liu, T. J. Pan, R. F. Wang, Y. Yue, and J. Shen, "Anti-corrosion and conductivity of the electrodeposited graphene/polypyrrole composite coating for metallic bipolar plates", Progress in Organic Coatings, Vol. 136, 2019, pp. 105237, doi: https://doi.org/10.1016/j.porgcoat.2019.105237.
  12. B. K. Kakati and D. Deka, "Differences in physico-mechanical behaviors of resol(e) and novolac type phenolic resin based composite bipolar plate for proton exchange membrane (PEM) fuel cell", Electrochim. Acta, Vol. 52, No. 25, 2007, pp. 7330-7336, doi: https://doi.org/10.1016/j.electacta.2007.06.021.
  13. S. Srinivasan, "Fuel cells for extraterrestrial and terrestrial applications", J. Electrochem. Soc., Vol. 136, No. 2, 1989, pp. 41C, doi: https://doi.org/10.1149/1.2096647.
  14. S. J. Lee, S. Mukherjee, J. McBreen, Y. W. Rho, Y. T. Kho, and T. H. Lee, "Effects of Nafion impregnation on performances of PEMFC electrodes", Electrochim. Acta, Vol. 43, No. 24, 1998, pp. 3693-3701, doi: https://doi.org/10.1016/S0013-4686(98)00127-3.
  15. W. K. Choi, B. J. Kim, B. G. Min, K. M. Bae, and S. J. Park, "Effects of sizing treatment of carbon fibers on mechanical interfacial properties of nylon 6 matrix composites", Elastomers and Composites, Vol. 45, No. 1, 2010, pp. 2-6. Retrieved from http://kiss.kstudy.com/thesis/thesis-view.asp?key=2843557.
  16. R. B. Prime, "Thermal characterization of polymeric materials", Academic Press, USA, 1982, pp. 435.
  17. J. N. Kirk, M. Munro, and P. W. R. Beaumont, "The fracture energy of hybrid carbon and glass fibre composites", J. Mater. Sci., Vol. 13, No. 10, 1978, pp. 2197-2204, doi: https://doi.org/10.1007/BF00541674.
  18. P. W. R. Beaumont and P. D. Anstice, "A failure analysis of the micromechanisms of fracture of carbon fibre and glass fibre composites in monotonic loading", J. Mater. Sci., Vol. 15, No. 10, 1980, pp. 2619-2635, doi: https://doi.org/10.1007/BF00550768.
  19. J. Y. Lee, W. K. Lee, H. R. Rim, G. B. Joung, and H. K. Lee, "Effect of carbon fiber filament and graphite fiber on the mechanical properties and electrical conductivity of elastic carbon composite bipolar plate for PEMFC", Trans. of the Korean Hydrogen and New Energy Society, Vol. 25, No. 2, 2014, pp. 131-138, doi: https://doi.org/10.7316/KHNES.2014.25.2.131.
  20. H. E. Lee, Y. S. Chung, and S. S. Kim, "Feasibility study on carbon-felt-reinforced thermoplastic composite materials for PEMFC bipolar plates", Composite Structures, Vol. 180, 2017, pp. 378-385, doi: https://doi.org/10.1016/j.compstruct.2017.08.037.