DOI QR코드

DOI QR Code

Shape memory alloy (SMA)-based Superelasticity-assisted Slider (SSS): an engineering solution for practical aseismic isolation with advanced materials

  • Narjabadifam, Peyman (Department of Civil Engineering, Faculty of Engineering, University of Bonab) ;
  • Noori, Mohammad (Department of Mechanical Engineering, California Polytechnic State University) ;
  • Cardone, Donatello (School of Engineering, University of Basilicata) ;
  • Eradat, Rasa (Department of Structural Earthquake Engineering, Sharestan Tarh Tabriz Consultants) ;
  • Kiani, Mehrdad (Department of Industrial Architecture, Sharestan Tarh Tabriz Consultants)
  • 투고 : 2019.11.07
  • 심사 : 2020.04.28
  • 발행 : 2020.07.25

초록

Shape memory alloy (SMA)-based Superelasticity-assisted Slider (SSS) is proposed as an engineering solution to practically exploit the well-accepted advantages of both sliding isolation and SMA-based recentering. Self-centering capability in SSS is provided by austenitic SMA cables (or wire ropes), recently attracting a lot of interest and attention in earthquake engineering and seismic isolation. The cables are arranged in various novel and conventional configurations to make SSS versatile for aseismic design and retrofit of structures. All the configurations are detailed with thorough technical drawings. It is shown that SSS is applicable without the need for Isolation Units (IUs). IUs, at the same time, are devised for industrialized applications. The proof-of-concept study is carried out through the examination of mechanical behavior in all the alternative configurations. Force-displacement relations are determined. Isolation capabilities are predicted based on the decreases in seismic demands, estimated by the increases in effective periods and equivalent damping ratios. Restoring forces normalized relative to resisting forces are assessed as the criteria for self-centering capabilities. Lengths of SMA cables required in each configuration are calculated to assess the cost and practicality. Practical implementation is realized by setting up a small-scale IU. The effectiveness of SSS under seismic actions is evaluated using an innovative computer model and compared to those of well-known Isolation Systems (ISs) protecting a reference building. Comparisons show that SSS seems to be an effective IS and suitable for earthquake protection of both structural and non-structural elements. Further research aimed at additional validation of the system are outlined.

키워드

참고문헌

  1. Ahmadi, H., Ab-Malek, K., Muhr, A. and Picken, J. (2013), "High damping seismic isolators- performance and historical development", Proceedings of the 13th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures - Commemorating JSSI 20th Anniversary, Sendai, Japan, September.
  2. Alberti, L. (2018), "Lessons from the past: some Greek Bronze Age responses to natural disasters and their modern counterparts", Ann. Geophys., 61, AC74. https://doi.org/10.4401/ag-8143
  3. Attanasi, G. and Auricchio, F. (2011), "Innovative superelastic isolation device", J. Earthq. Eng., 15(sup1), 72-89. https://doi.org/10.1080/13632469.2011.562406
  4. Attanasi, G., Auricchio, F., Crosti, C. and Fenves, G.L. (2008), "An innovative isolation bearing with shape memory alloys", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
  5. Attanasi, G., Auricchio, F. and Fenves, G.L. (2009), "Feasibility assessment of an innovative isolation bearing system with shape memory alloys", J. Earthq. Eng., 13(sup1), 18-39. https://doi.org/10.1080/13632460902813216.
  6. Bayraktar, A., Keypour, H. and Naderzadeh, A. (2012), "Application of Ancient Earthquake Resistant Method in Modern Construction Technology", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September.
  7. Bek, M., Oseli, A., Saprunov, I., Zhumagulov, B.T., Mian, S.M., Gusev, B.V., Zarnic, R., Bernstorff, B.V., Holecek, N. and Emri, I. (2013), "High pressure dissipative granular materials for earthquake protection of houses", Anali Pazu, 3(2), 79-86.
  8. Beltran, J.F., Cruz, C., Herrera, R. and Moroni, R. (2011), "Shape memory alloy CuAlBe strands subjected to cyclic axial loads", Eng. Struct. 33(10), 2910-2918. https://doi.org/10.1016/j.engstruct.2011.06.015
  9. Biggs, D.B. (2017), "Thermo-mechanical behavior and shakedown of shape memory alloy cable structure", Ph.D. Dissertation, University of Michigan, MI, USA.
  10. Botis, M. and Harbic, C. (2012), "A brief history upon seismic isolating systems", Bull. Transilvania Univ. Brasov- Series I: Eng. Sci., 5(54-1), 93-98.
  11. Calafell, R.L., Roschke, P.N. and De la Llera, J.C. (2010), "Optimized Friction Pendulum and Precast-Prestressed Pile to Base-Isolate a Chilean Masonry House", Bull. Earthq. Eng., 8(4). https://doi.org/1019-1036. 10.1007/s10518-009-9163-0
  12. Calvi, G.M., Calvi, P.M. and Moratti, M. (2017), "Seismic isolation of buildings using devices based on sliding between surfaces with variable friction coefficient", Innov. Infrastruct. Solut., 2(1), 39. https://doi.org/10.1007/s41062-017-0081-8
  13. Carboni, B., Lacarbonara, W. and Auricchio, F. (2015), "Hysteresis of multiconfiguration assemblies of Nitinol and steel strands: experiments and phenomenological identification", J. Eng. Mech., 141(3), 04014135. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000852
  14. Cardone, D., De Canio, G., Dolce, M., Marnetto, R., Moroni, C., Nicoletti, M., Nigro, D., Pizzari, A., Ponzo, F.C., Renzi, E., Santarsiero, G. and Spina, D. (2003), "Comparison of different passive control techniques through shaking table tests", Proceedings of the 8th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, Yerevan, Armenia, October.
  15. Cardone, D., Palermo, G. and Narjabadifam, P. (2009), "Smart restorable sliding base isolation system for the aseismic control of structures", Proceedings of the 11th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, Guangzhou, China, November.
  16. Cardone, D., Narjabadifam, P. and Nigro, D. (2011), "Shaking table tests of the Smart Restorable Sliding Base Isolation System (SRSBIS)", J. Earthq. Eng., 15(8), 1157-1177. https://doi.org/10.1080/13632469.2011.555057
  17. Carreras, G., Casciati, F., Casciati, S., Isalgue, A., Marzi, A. and Torra, V. (2011), "Fatigue laboratory tests toward the design of SMA portico-braces", Smart Struct. Syst., Int. J., 7(1), 41-57. https://doi.org/10.12989/sss.2011.7.1.041
  18. Casciati, S. (2019), "SMA-based devices: insight across recent proposals toward civil engineering applications", Smart Struct. Syst., Int. J., 24(1), 111-125. https://doi.org/10.12989/sss.2019.24.1.111
  19. Casciati, S. and Marzi, A. (2010), "Experimental studies on the fatigue life of shape memory alloy bars", Smart Struct. Syst., Int. J., 6(1), 73-85. https://doi.org/10.12989/sss.2010.6.1.073
  20. Casciati, F. and Van der Ejik, C. (2008), "Variability in mechanical properties and microstructure characterization of CuAlBe shape memory alloys for vibration mitigation", Smart Struct. Syst., Int. J., 4(2), 103-121. https://doi.org/10.12989/sss.2008.4.2.103
  21. Casciati, F., Faravelli, L. and Hamdaoui, K. (2007), "Performance of a base isolator with shape memory alloy bars", Earthq. Eng. Eng. Vib., 6(4), 401-408. https://doi.org/10.1007/s11803-007-0787-2
  22. Casciati, S., Torra, V. and Vece, M. (2017), "Local effects induced by dynamic load self-heating in NiTi wires of shape memory alloys", Struct. Control Health Monit., 25(4), e2134. https://doi.org/10.1002/stc.2134
  23. Choi, E., Nam, T. and Cho, B.S. (2005), "A new concept of isolation bearings for highway steel bridges using shape memory alloys", Can. J. Civil Eng., 32(5), 957-967. https://doi.org/10.1139/l05-049
  24. Cladera, A., Weber, B., Leinenbach, C., Czaderski, C., Shahverdi, M. and Motavalli, M. (2014), "Iron-based shape memory alloys for civil engineering structures: an overview", J. Constr. Build. Mater., 63, 281-293. https://doi.org/10.1016/j.conbuildmat.2014.04.032
  25. Constantinou, M., Mokha, A. and Reinhorn, A. (1990), "Teflon bearings in base isolation. II Modeling", J. Struct. Eng., 116(2), 4551-4574. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(455)
  26. Dang, X.Z., Yang, H.L., Yuan, W.C. and Song, D.Q. (2013), "Experimental investigation on composite seismic isolation system", Adv. Mater. Res., 743, 146-149. https://doi.org/10.4028/www.scientific.net/AMR.743.146
  27. Davoodi, H., Frederick, A.J., Saffar, A. and Noori, M. (2001), "Building system using shape memory alloy elements", US Patent No. 6170202; United States Patent and Trademark Office, Alexandria, VA, USA.
  28. Demetriades, G.F., Constantinou, M.C. and Reinhorn, A.M. (1992), "Study of wire rope systems for seismic protection of equipment in building", Research Report No. NCEER-92-0012; National Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, New York, USA.
  29. Desroches, R., McCormick, J. and Delemont, M. (2004), "Cyclic properties of superelastic shape memory alloy wires and bars", J. Struct. Eng., 130(1), 38-46. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(38)
  30. Dickson, R. (2016), "The Evansian period of Knossos: inconvenient history and the world heritage list", Fabrications, 26(1), 102-120. https://doi.org/10.1080/10331867.2016.1131134
  31. Dolce, M. and Cardone, D. (2001), "Mechanical behavior of shape memory alloys for seismic applications: part 2- austenite NiTi wires subjected to tension", Int. J. Mech. Sci., 43(11), 2657-2677. https://doi.org/10.1016/S0020-7403(01)00050-9
  32. Dolce, M., Cardone, D. and Marnetto, R. (2000), "Implementation and testing of passive control devices based on shape memory alloys", Earthq. Eng. Struct. Dyn., 29(7), 945-968. https://doi.org/10.1002/1096-9845(200007)29:7%3C945::AIDEQE958%3E3.0.CO;2-%23
  33. Dolce, M., Cardone, D., Ponzo, F.C. and Di Cesare, A. (2004), Design of Structures with Seismic Isolation: in Italian - Progetto di Edifici con Isolamento Sismico, IUSS Press, Pavia, Italy.
  34. Dolce, M., Cardone, D. and Croatto, F. (2005), "Frictional behavior of steel-PTFE interfaces for seismic isolation", Bull. Earthq. Eng., 3(1), 75-99. https://doi.org/10.1007/s10518-005-0187-9
  35. Failla, I. (2017), "Novel devices and strategies in earthquake protection of structures", Ph.D. Dissertation, University of Messina, Messina, Italy.
  36. Fallah, N. and Zamiri, G. (2013), "Multi-objective optimal design of sliding base isolation using genetic algorithm", Sci. Iran. A, 20(1), 87-96. https://doi.org/10.1016/j.scient.2012.11.004
  37. Fang, C., Yam, M.C.H., Lam, A.C.C. and Zhang, Y. (2015), "Feasibility study of shape memory alloy ring spring systems for self-centring seismic resisting devices", Smart Mater. Struct., 24, 1-19. http://dx.doi.org/10.1088/0964-1726/24/7/075024
  38. Fang, C., Zheng, Y., Chen, J., Yam, M.C.H. and Wang, W. (2019), "Superelastic NiTi SMA cables: Thermal-mechanical behavior, hysteretic modelling and seismic application", Eng. Struct., 183, 533-549. https://doi.org/10.1016/j.engstruct.2019.01.049
  39. Hedayati Dezfuli, F. and Shahria Alam, M. (2018), "Smart lead rubber bearings equipped with ferrous shape memory alloy wires for seismically isolating highway bridges", J. Earthq. Eng., 22(6), 1042-1067. https://doi.org/10.1080/13632469.2016.1269692
  40. Izumi, M. (1998), "State-of-the-art Report: Base isolation and passive seismic response control", Proceedings of the 9th World Conference Earthquake Engineering, Tokyo, Japan, August.
  41. Jalali, A., Cardone, D. and Narjabadifam, P. (2010), "Smart restorable sliding base isolation system", Bull. Earthq. Eng., 9(2), 657-673. https://doi.org/10.1007/s10518-010-9213-7
  42. JSSI (2016), SI-data-2016: until the end of 2015, Japan Society of Seismic Isolation (JSSI), Tokyo, Japan. www.jssi.or.jp/english/aboutus/database.html
  43. Kaptan, K. (2013), "Seismic base isolation and energy absorbing devices". Eur. Sci. J., 9(18), 41-54. http://dx.doi.org/10.19044/esj.2013.v9n18p%25p
  44. Khan, M.M. and Lagoudas, D. (2002), "Modeling of shape memory alloy pseudoelastic spring elements using Preisach model for passive vibration isolation", Proceedings of SPIE's 9th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA. https://doi.org/10.1117/12.475230
  45. Khodaverdian, A., Ghorbani-Tanha, K. and Rahimian, M. (2012), "An innovative base isolation system with Ni-Ti alloy and its application in seismic vibration control of Izadkhast Bridge", J. Intell. Mater. Syst. Struct., 23(8), 897-908. https://doi.org/10.1177%2F1045389X12440748 https://doi.org/10.1177/1045389X12440748
  46. Kitamura, K. (2016), "Mechanical property of Ti-Ni superelastic wire ropes", Trans. Mat. Res. Soc. Japan, 41(4), 355-358. https://doi.org/10.14723/tmrsj.41.355
  47. Krumme, R. and Hodgson, D.E. (1998), "Hysteretic damping apparati and method", US Patent No. 5842312; United States Patent and Trademark Office, Alexandria, VA, USA.
  48. Liu, Y., Wang, H., Qiu, C. and Zhao, X. (2019), "Seismic behavior of superelastic shape memory alloy spring in base isolation system of multi-story steel frame", Materials, 12(6), 997. https://doi.org/10.3390/ma12060997
  49. Mercuri, V. (2014), "Shape memory alloys strands: conventional 3D FEM modeling and simplified models", Ph.D. Dissertation, University of Pavia, Pavia, Italy.
  50. Monfared, H., Shirvani, A. and Nwaubani, S. (2013), "An investigation into the seismic base isolation from practical perspective", J. Civ. Struct. Eng., 3(3), 451-463. https://doi.org/10.6088/ijcser.201203013042
  51. Mostaghel, N. and Khodaverdian, M. (1987), "Dynamics of resilient-friction base isolator", Earthq. Eng. Struct. Dyn., 15(3), 379-390. https://doi.org/10.1002/eqe.4290150307
  52. Motavalli, M., Czaderski, C., Bergamini, A. and Janke, L. (2009), "Shape memory alloys for civil engineering structures - on the way from vision to reality", Archit. Civil Eng. Environ., 2(4), 81-94.
  53. Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures: from Theory to Practice, John Wiley & Sons, New York, USA.
  54. Narjabadifam, P. (2015), "Shape memory alloy (SMA)-based Superelasticity-assisted Slider (SSS)", Proceedings of the 7th International Conference on Seismology and Earthquake Engineering, Tehran, Iran, May.
  55. Ozbulut, O.E. and Hurlebaus, S. (2010), "Evaluation of the performance of a sliding-type base isolation system with a NiTi shape memory alloy device considering temperature effects", Eng. Struct., 32(1), 238-249. https://doi.org/10.1016/j.engstruct.2009.09.010
  56. Ozbulut, O.E. and Silwal, B. (2014), "Performance of isolated buildings with superelastic-friction base isolators under high seismic hazards", Proceedings of Structures Congress 2014, Boston, MA, USA, April.
  57. Ozbulut, O.E. and Silwal, B. (2016), "Performance assessment of buildings isolated with S-FBI system under near-fault earthquakes", Smart Struct. Syst., Int. J., 17(5), 709-724. https://doi.org/10.12989/sss.2016.17.5.709
  58. Ozbulut, O.E., Daghash, S. and Sherif, M.M. (2016), "Shape memory alloy cables for structural applications", J. Mater. Civ. Eng., 28(4), 04015176. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001457
  59. Panchal, V. and Jangid, R. (2009), "Seismic response of structures with variable friction pendulum system", J. Earthq. Eng., 13(2), 193-216. https://doi.org/10.1080/13632460802597786
  60. Reedlunn, B., Daly, S. and Shaw, J. (2013), "Superelastic shape memory alloy cables: Part I - Isothermal tension experiments", Int. J. Solids Struct., 50(20-21), 3009-3026. https://doi.org/10.1016/j.ijsolstr.2013.03.013
  61. Saadat, S., Salichs, J., Noori, M., Hou, Z., Davoodi, H., Bar-on, I., Suzuki, Y. and Masuda, A. (2002), "An overview of vibration and seismic applications of NiTi shape memory alloy", Smart Mater. Struct., 11(2), 218-229. PII: S0964-1726(02)33383-4 https://doi.org/10.1088/0964-1726/11/2/305
  62. Sakon, T. (2018), "Novel research for development of shape memory alloys", Metals, 8(2), 125. https://doi.org/10.3390/met8020125
  63. Sherif, M.M. and Ozbulut, O.E. (2018), "Tensile and superelastic fatigue characterization of NiTi shape memory cables", Smart Mater. Struct., 27(1), 015007. https://doi.org/10.1088/1361-665X/aa9819
  64. Shinozuka, M., Chaudhuri, S.R. and Mishra, S.K. (2015), "Shape-Memory-Alloy supplemented Lead Rubber Bearing (SMA-LRB) for seismic isolation", Probabilistic Eng. Mech., 41, 34-45. https://doi.org/10.1016/j.probengmech.2015.04.004
  65. Spizzuoco, M. (2017), "Study of wire rope devices for improving the re-centering capability of base isolated buildings", Struct. Control Health Monit., 24(6), e1928. https://doi.org/10.1002/stc.1928
  66. Torra, V., Isalgue, A., Martorell, F., Terriault, P. and Lovey, F.C. (2007), "Built in dampers for family homes via SMA: An ANSYS computation scheme based on mesoscopic and microscopic experimental analyses", Eng. Struct., 29(8), 1889-1902. https://doi.org/10.1016/j.engstruct.2006.08.028
  67. Torra, V., Isalgue, A., Auguet, C., Carreras, G., Lovey, F.C., Soul, H. and Terriault, P. (2009), "Damping in Civil Engineering Using SMA. The Fatigue Behavior and Stability of CuAlBe and NiTi Alloys", J. of Materi. Eng. and Perform., 18, 738-745. https://doi.org/10.1007/s11665-009-9442-6
  68. Torra, V., Isalgue, A., Martorell, F., Terriault, P. and Lovey, F.C. (2014), "On the NiTi wires in dampers for stayed cables", Smart Struct. Syst., Int. J., 13(3), 353-374. http://dx.doi.org/10.12989/sss.2014.13.3.353
  69. Torra, V., Isalgue, A., Lovey, F.C. and Sade, M. (2015), "Shape memory alloys as an effective tool to damp oscillations", J. Therm. Anal. Calorim., 119(3), 1475-1533. https://doi.org/10.1007/s10973-015-4405-7
  70. Van Humbeeck, J. (1999), "Non-medical applications of shape memory alloys", Mater. Sci. Eng. A, 273-275, 134-148. https://doi.org/10.1016/S0921-5093(99)00293-2
  71. Villaverde, R. (2017), "Base isolation with sliding hydromagnetic bearings: concept and feasibility study", Struct. Infrastruct. Eng., 13(6), 709-721. https://doi.org/10.1080/15732479.2016.1187634
  72. Wang, B. and Zhu, S. (2018), "Superelastic SMA U-shaped dampers with self-centering functions", Smart Mater. Struct., 27(5), 055003. https://doi.org/10.1088/1361-665X/aab52d
  73. Wang, W., Fang, C. and Liu, J. (2016), "Large size superelastic SMA bars: heat treatment strategy, mechanical property and seismic application", Smart Mater. Struct., 25(7), 075001. http://dx.doi.org/10.1088/0964-1726/25/7/075001
  74. Wen, Y.H., Peng, H.B., Raabe, D., Gutierrez-Urrutia, I., Chen, J. and Du, Y.Y. (2014), "Large recovery strain in Fe-Mn-Si based shape memory steels obtained by engineering annealing twin boundaries", Nat. Commun., 5, 4964. https://doi.org/10.1038/ncomms5964
  75. Wilde, K., Gardoni, P. and Fujino, Y. (1997), "Seismic response of base-isolated structures with shape memory alloy damping devices", Proceedings of SPIE's Smart Structures and Materials '97, San Diego, CA, USA, March.
  76. Zheng, Y. and Dong, Y. (2017), "Comparative seismic performance of conventional and resilient bridges with SMAcable-based frictional sliding bearings", Proceedings of the 2017 World Congress on Advances in Structural Engineering and Mechanics (ASEM17), Seoul, Korea, August-September.
  77. Zheng, Y., Dong, Y. and Li, Y. (2018), "Resilience and life-cycle performance of smart bridges with shape memory alloy (SMA)-cable-based bearings", Constr. Build. Mater., 158, 389-400. https://doi.org/10.1016/j.conbuildmat.2017.10.031
  78. Zheng, Y., Dong, Y., Chen, B. and Anwar, G.A. (2019), "Seismic damage mitigation of bridges with self-adaptive SMA-cablebased bearings", Smart Struct. Syst., Int. J., 24(1), 127-139. https://doi.org/10.12989/sss.2019.24.1.127