Progress in Superconductivity and Cryogenics (한국초전도ㆍ저온공학회논문지)

The Korean Society of Superconductivity and Cryogenics (한국초전도저온학회)
권호 표지
DOI QR코드

DOI QR Code

Effectiveness analysis of pre-cooling methods on hydrogen liquefaction process

  • Yang, Yejun (Cryogenic Engineering Laboratory, Korea Advanced Institute of Science and Technology) ;
  • Park, Taejin (Cryogenic Engineering Laboratory, Korea Advanced Institute of Science and Technology) ;
  • Kwon, Dohoon (Cryogenic Engineering Laboratory, Korea Advanced Institute of Science and Technology) ;
  • Jin, Lingxue (Cryogenic Engineering Laboratory, Korea Advanced Institute of Science and Technology) ;
  • Jeong, Sangkwon (Cryogenic Engineering Laboratory, Korea Advanced Institute of Science and Technology)
  • Received : 2020.03.28
  • Accepted : 2020.09.16
  • Published : 2020.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this analytic study is to design and examine an efficient hydrogen liquefaction cycle by using a pre-cooler. The liquefaction cycle is primarily comprised of a pre-cooler and a refrigerator. The fed hydrogen gas is cooled down from ambient temperature (300 K) to the pre-cooling coolant temperature (either 77 K or 120 K approximately) through the pre-cooler. There are two pre-cooling methods: a single pre-coolant pre-cooler and a cascade pre-cooler which uses two levels of pre-coolants. After heat exchanging with the pre-cooler, the hydrogen gas is further cooled and finally liquefied through the refrigerator. The working fluids of the potential pre-cooling cycle are selected as liquid nitrogen and liquefied natural gas. A commercial software Aspen HYSYS is utilized to perform the numerical simulation of the proposed liquefaction cycle. Efficiency is compared with respect to the various conditions of the heat exchanging part of the pre-cooler. The analysis results show that the cascade method is more efficient, and the heat exchanging part of the pre-coolers should have specific UA ratios to maximize both spatial and energy efficiencies. This paper presents the quantitative performance of the pre-cooler in the hydrogen liquefaction cycle in detail, which shall be useful for designing an energy-efficient liquefaction system.

Keywords

References

  1. H. Chang, K. Ryu, J. Baik, "Thermodynamic design of hydrogen liquefaction systems with helium or neon Brayton refrigerator," Cryogenics, vol. 91, pp. 68-76, 2018. https://doi.org/10.1016/j.cryogenics.2018.02.007
  2. C. Lee, J. Lee, S. Jeong, "Design of closed-loop nitrogen Joule-Thomson refrigeration cycle for 67 K with sub-atmospheric device," Journal of the Korea Institute of Applied Superconductivity and Cryogenics, vol. 15, pp. 45-50, 2013 https://doi.org/10.9714/psac.2013.15.1.045
  3. D. O. Berstad, J. H. Stang, P. Neksa, "Large-scale hydrogen liquefier utilising mixed-refrigerant pre-cooling," International Journal of Hydrogen Energy, vol. 35, Issue 10, pp 4512-4523, 2010. https://doi.org/10.1016/j.ijhydene.2010.02.001
  4. A. Kuendig, K. Loehlein, G. J. Kramer, J. Huijsmans, "Large scale hydrogen liquefaction in combination with LNG re-gasification," In Proceedings of the 16th world hydrogen energy conference, pp. 3326-3333, 2006.
  5. R. F. Barron, Cryogenic Systems, Oxford University Press, 1985.
  6. S. Jeong, L. Jin, "Thermodynamic performance comparison of a two-stage cryocooler and cascade cryocoolers with thermal anchoring for precooling purpose", Cryogenics, vol. 99, pp 32-38, 2019. https://doi.org/10.1016/j.cryogenics.2019.02.010
  7. H. Chang, "A thermodynamic review of cryogenic refrigeration cycles for liquefaction of natural gas," Cryogenics, vol. 72, Part 2, pp. 127-147, 2015. https://doi.org/10.1016/j.cryogenics.2015.10.003
  8. V.S. Bisht, Thermodynamic Analysis of Kapitza Cycle based on Nitrogen Liquefaction. IOSR Journal of Engineering (IOSRJEN), vol. 4, Issue 5: V6, pp 38-44, 2014. https://doi.org/10.9790/3021-04563844